厂房

chǎng fáng
  • workshop;factory building;shed;factory floor
厂房厂房
厂房 [chǎng fáng]
  • [factory building;workshop] 工厂的房屋,指车间

厂房[chǎng fáng]
  1. SP预应力空心板在钢结构厂房围护结构中的应用研究

    A study on application of SP prestressed cored slab in exterior-protected construction of steel structure factory building

  2. 工业厂房扩建工程RPC构件预制施工技术

    Prefabricated construction technique of reactive powder concrete ( RPC ) member in extension project of factory building

  3. 厂房只剩下混凝土骨架了。

    Only the concrete skeleton of the factory remained .

  4. 厂房罗列在山坡上。

    Factory buildings spread out over the hillside .

  5. 夜幕降临了,但厂房还能看见个轮廓。

    Night fell , but the outline of the factory buildings was still discernible . ; The factory buildings were silhouetted against the growing darkness .

  6. 警卫人员定时查巡厂房。

    Security guards regularly patrol the factory premises .

  7. 屋盖MR智能隔震系统对升船结构顶部厂房地震鞭梢效应的模糊控制

    Fuzzy seismic control of top building of lift-ship structure with roof intelligent isolation system

  8. H型钢结构工业厂房施工技术

    Constructive technology of H type steel structure workshop

  9. 水电站地下厂房锚杆支护模型在CAD和ANSYS中的实现

    Anchor Rod Support Model of Underground Powerhouse Realized in CAD & ANSYS

  10. 这里的六家工厂构成了第一太阳能公司(FIRSTSOLAR)的生产主力。这些工厂的厂房如洞穴般空旷,长可达三分之一英里(约合540米)。

    The six factories here with cavernous rooms up to one-third of a mile long constitute the production backbone of First Solar .

  11. 文中,在建立屋盖智能隔震升船结构计算力学模型的基础上,建立了屋盖MR智能隔震系统对升船结构顶部厂房地震反应模糊控制的设计计算方法。

    After establishing the mechanical model of intelligent isolation structure system , fuzzy control design methods of seismic response for top building of lift ship structure are developed .

  12. 塑料模壳适用于混凝土密肋楼盖的模板,对IC厂房无尘车间开孔密肋楼盖可拆式模壳技术进行系统阐述,并探讨施工要点及其控制方法。

    Authors expound plastic formwork technology for open waffle slab of clean room in IC workshop systematically , and discuss the key problems in construction and controlling method .

  13. 浅谈CRV柔强辐射采暖系统在工业厂房中的设计应用

    A Brief Talk on CRV Medium Radiation Heating System in Factory Buildings

  14. 微电子工业迅猛发展,本文以一个典型的IC厂房为实例,介绍几种洁净设计方式,并从投资、施工、运行等方面进行分析比较。

    Nowadays micro-electronic industry develop rapidly , and this article introduces some kinds of cleaning design modes based on a typical IC Fab as example , analyses and compares it in investment , construction , operation , etc.

  15. 厂房在遭受地震作用时MR-TMD也有很好的控制效果。

    MR-TMD also has great control effect when factory structure is suffering earthquake .

  16. 通过ANSYS软件建立地下厂房网格模型,运用自行研制的ANSYS-FLAC3D转换程序将网格模型导入FLAC3D软件进行施工开挖过程模拟。

    This paper through establishes underground plant grid model by ANSYS , it to transforms the grid model to FLAC3D by ANSYS-FLAC3D program .

  17. AC-600厂房布置

    AC-600 Plant Building Arrangement

  18. 禹州电厂一期主厂房柱、梁、板等构件均采用清水混凝土施工工艺。梁、柱模板采用拼装大块钢模板表面粘贴PVC板;

    As-cast-finish concrete technology was adopted in the works of columns , beams and floor slabs of main plant of Yu Zhou power plant phase 1.Huge spliced steel forms stuck with PVC board were used for concrete pouring of beams and columns .

  19. 通过对四家药品生产企业GMP车间净化系统检验情况的介绍,分析了一些GMP厂房设计、施工中的问题。

    This paper makes a comprehensive analysis of some problems in designing and constructing a GMP workshop with the introduction of the test reports of HVAC of 4 GMP workshop s in pharmaceutical factory .

  20. 利用类似工程爆破建立的爆破地震速度反应谱,采用ANSYS通用程序对三峡工程三期碾压混凝土围堰拆除爆破地震作用厂房坝段动力响应进行了计算。

    This paper using the blasting vibrant velocity response spectrum of the similar blasting project and the ANSYS program carried through the dynamical response calculation of power houses dam under the vibration by blasting demolishing the third period RCC cofferdam of Three Gorges Project .

  21. 介绍了与超高级别微电子洁净厂房有关的分级标准,并对某0.1μm1级洁净厂房作了实际测试,给出测试项目、测试方法和使用的主要测试仪器。

    Presents a current standard for high-class microelectronic clean rooms . Tests a high class building of class 1 with grade 0.1 μ m. Summarizes the required testing items , procedures and apparatus in such a factory .

  22. 我国现行《冷弯薄壁型钢结构技术规范》(GB50018-2002)对主要承重构件的截面厚度进行了限制,主要适用于仓库,厂房等公用建筑。

    In China , the sectional thickness of primary component is restricted by " The Technical Criterion on Cold-formed Thin-wall Steel Structure " .

  23. 主副厂房全长103.25m,宽19.20m,高51.20m(最高处)。

    The length of main house and auxiliary plant is 103.25m , the width is 19.20m , the height is 51.20m .

  24. 柘溪水电站扩机过程中,为保证扩机厂房东端开关站边坡稳定,采用截面积分别为2.5m×8m和4m×8m的挡土墩进行支护。

    During the expansion of Zhexi Hydropower Station , in order to support the eastern slope of the power station , a row of anti-slide piles with sectional area 2.5m × 8 m and 4 m × 8 m were applied .

  25. 三峡工程厂房基坑开挖中,大部分坝段坝趾下游形成高达10~80m的临空陡坡,其中部分地段长大缓倾角结构面较发育,与临空面组合构成坝基潜在滑移面。

    During the power-house foundation of the Three Gorges projet , a 40 ~ 80 m high steep slope will be formed on downstream side of the damtoe rock monolith where large low dip angle joints constitute potential sliding surface of the dam foundation .

  26. 结合具体的工程实例,对12m跨厂房排架柱结构施工要领作了探讨,从轴线标高控制、柱墙连接、钢筋工程方面,介绍了结构施工方面的实践经验,并提出一些应注意的事项。

    Combined with specific project , it discusses structural construction of bent pole in 12 m span factory building , experiences of structural construction are introduced from axial level control 、 connection between pole with wall and reinforcement engineering , and putts forward matters need attention .

  27. 用DeST能耗模拟软件对大厂房建立了负荷计算模型,用动态模拟的方法模拟大厂房全年冷热总负荷,逐时冷热负荷,以及该建筑全年冷热负荷指标。

    We use DeST establishment building energy simulation software for load calculation model , use dynamic simulation method for simulation of large factory hot and cold all year round the total load , cold and heat load hourly , and Annual cooling and heating load index .

  28. 三峡左岸电站厂房属坝后引水式厂房。机组为立轴混流式,单机容量700MW,总装机容量9800MW。

    The Three Gorges left powerhouse located at the left dam toe is of a diversion type , has a total installed capacity of 9 800 MW and 14 vertical shaft turbines of 700 MW each .

  29. 对电力主厂房超长混凝土框架结构梁的裂缝宽度采用混凝土结构设计规范(GB50010-2002)和美国混凝土规范(ACI318-2002)两种规范计算比较分析。

    The crack width of the beam of the over-long concrete frame structures is analyzed using the code for design of concrete structures ( GB50010-2002 ) and the building code requirements for structural ( ACI318-2002 ), respectively . 4 .

  30. 高大厂房热车间自然通风数值模拟与实验研究

    Numerical Simulation and Experimental Research of Natural Ventilation in Heat Workshop