后轮

hòu lún
  • rear-wheel;back wheel;trailing wheel;hind wheel
后轮后轮
后轮[hòu lún]
  1. 我需要一把扳手来换后轮。

    I 'll need a spanner to change the back wheel .

  2. 有个东西在你的后轮上面。

    That thing gets caught up in your back wheel .

  3. 后轮突然转动起来,货车加速冲过了最后几英尺距离。

    The back wheels spun and the van spurted up the last few feet .

  4. 司机用千斤顶垫高汽车的后轮,查看什么地方出了毛病。

    The driver blocked up the rear wheels of his lorry with a jack to find out what was wrong .

  5. 通过对几种结构形式的底盘进行了分析,设计了用高性能X型材为框架,后轮驱动的轮式底盘结构。

    Several structural forms of chassis were analyzed , and high-performance X profiles were designed as a framework , and wheeled chassis structure with rear-wheel drive .

  6. 为了进一步提高其受欢迎程度,BMW于1990年推出了一种新的后轮轴。

    To further improve motoring sensation , BMW introduces a new kind of rear axle in1990 .

  7. 讨论了低硫高促硫化体系EPDM制品的亮度和模具污染的问题,研究了微型汽车后轮制动缸皮碗的配方。

    The problems of glittering of EPDM products with low sulfur and high accelerator vulcanization system and its mold pollution were discussed .

  8. 四轮转向(Four-WheelSteering4WS)是指在车辆转向时,除了前轮转向外,后轮也参加转向。

    Apart from front-wheel steering , rear-wheel steering steering also attend , it is called Four-wheel steering .

  9. VSC系统整合牵引力控制系统(TRC),在光滑路面上行驶时,有助于限制后轮打滑。

    The VSC system integrates traction control ( TRC ) to help limit rear wheel spin on slippery road surfaces .

  10. 四轮转向(FourWheelSteering,简称4WS)的基本原理是,利用车辆行驶中的某些信息来控制后轮的转角输入,以提高车辆的操纵性和稳定性。

    The basic principle of Four-wheel steering ( Four Wheel Steering , referred to 4WS ) is to use some traffic information to control the input of the rear corner , in order to improve the vehicles ' maneuverability and stability .

  11. 研究了基于PID控制和模糊控制的舵机控制方法,系统通过速度传感器获取当前速度信息,实现对后轮驱动电机的控制。

    Moreover , the characteristics of the system model are analyzed . A steering gear control strategy based on classic PID algorithms and fuzzy control algorithms is investigated in the thesis , and the rear-wheel-drive motor is controlled according to the speed information obtained through speed sensor .

  12. 美国消费者最早看到的S级轿车会是S550,它配备了最大输出功率为335千瓦的4.6升双涡轮V8发动机,后轮驱动与全时四轮驱动款均配备七速自动变速器。

    U.S. buyers will first see the S-class as the S550 , with a twin-turbo , 4.6-liter , 449-hp V8 under the hood and a seven-speed automatic , in either rear-drive or all-wheel-drive configurations .

  13. 一个主要的缺陷是它不是QX全职四轮驱动喜欢LC而是是后轮驱动的汽车把力量回前滑脱,是侦破。

    A major drawback of the QX is that it is not full time4wd like the LC but rather it is a primarily rear wheel drive vehicle that shift power front to back once slippage is detected .

  14. 当护栏底部凸缘高为150mm时,则车辆的前、后轮均不能爬上护栏斜坡。

    While the height of convex barrier flange at bottom is 150 mm , the front wheel and rear wheel of truck can 't climb up concrete barrier slope .

  15. Dual-CBS双联制动系统,将手和脚两个操作系统并为一体,并同时制动前、后轮。

    The Dual-CBS is a braking system integrating hand and foot opening systems together and can get the front and rear wheels braked simultaneously .

  16. 在工作周内,威廉姆斯会把他的公路自行车安装到一个名为WahooFitnessKickr的装置上,这个装置取代了他的自行车后轮,他可以在不离开房间的情况下模拟11个不同难度水平的骑行。

    During the working week , Mr Williams puts his road bike on a contraption called a Wahoo Fitness Kickr , which replaces his bike 's rear wheel and allows him to simulate cycling at 11 different levels of difficulty without leaving his house .

  17. 本文以CA142汽车后轮罩为对象,利用一种新的网格方法,计算了应变、应力等高线,分析了后轮罩出现冲压缺陷的原因。

    In this paper , a new griding method is introduced to calculate strain and stress contour for rear wheel cover of CA142 truck and the reasons for stamping defects are analyzed .

  18. 摩托车后轮毂压铸模设计

    Design of Die-Casting Die for the Rear Wheel Hub of Motorcycle

  19. 好,接着,就射爆他的车后轮吧!

    Well , then , just shoot out the back tire !

  20. 摩托车轮胎客车后轮过热改善措施

    Motorcycle Tires Improving Measures of the Bus Hub with High Temperature

  21. 一个后轮卡在泥里了。

    One of the back wheels got stuck in the mud .

  22. 后轮制动器:2活塞卡钳,291毫米的钢制通风盘。

    Rear brakes : 2-piston calipers , 291 mm steel ventilated discs .

  23. 通过电机驱动理论的分析,给出了详细的控制硬件电路的设计方案,并确定了对电动汽车前轮单极性、后轮双极性控制的方案。

    The control principle and hardware design of the motor is explained .

  24. 拆卸后轮轴承需要以下工具。

    The following tools are required for removing the rear wheel bearing .

  25. 发动机通过一条传动带拖动后轮。

    The engine drove the rear wheel via a belt .

  26. 后轮转向半挂汽车列车的轨迹偏差分析

    Analysis of Track Bias of the Automobile Train with Rear Wheel Steering

  27. 让另一个人顶住相应的后轮。

    Get a second person to counter at the relevant rear wheel .

  28. 旋开后轮罩区域中的组合电线。

    Undo combination wire in the area of the rear wheel housing .

  29. 那就替我看看左后轮好吗?

    Would you mind checking out the left rear one for me ?

  30. 我下车检查了右后轮。

    I got out and examined the right rear wheel .