承载能力

chénɡ zài nénɡ lì
  • bearing capacity
承载能力承载能力
  1. 基于改进的BP神经网络的有初始几何缺陷的薄壁箱形结构承载能力的预测

    Prediction of the bearing capacity of thin-walled box with geometric imperfection using BP neural network

  2. 插板加强K型间隙圆钢管相贯节点的极限承载能力非线性有限元分析

    Nonlinear finite element analysis of the ultimate bearing capacity of reinforced circular tubular gapped K-joints with a flashboard

  3. 该无人机系统具有航程远、留空时间长、承载能力大、环境适应性强等特点,可在“断路、断电、断网”等极端灾害条件下,完成现场探查、公/专网应急组网通信、应急物资投送等任务。

    Featuring outstanding flight range , endurance , carrying capacity and environmental adaptability , the Wing Loong-2H UAV is able to conduct field surveys , support emergency communication and deliver emergency supplies in extreme conditions , such as power and network outages and circuit breaks .

  4. 采用CASE法检验桩的质量和承载能力在国内已渐趋普遍。

    CASE method has been more and more widely used in pile bearing capacity and integrity testing in China .

  5. 由耐热合成材料PEEK热塑成形圆柱齿轮的承载能力

    Load Capacity of Cylindrical Gears Made of Heat Resistant Thermoplastic PEEK

  6. 结构模态迁移诊断方法客观地反映了井架整体结构状态,现场应用表明,该方法对车载井架、K形和塔形井架的安全承载能力标定可靠,效果良好。

    The field tests show that it is reliable and effective to determinate the safe load carrying ability of truck-mounted derrick , K-shaped and tower-shaped derricks using this method .

  7. 结合轴压构件约束混凝土对极限承载能力的贡献,运用大型通用程序ANSYS模拟计算构件的极限承载能力,并进行了约束和非约束混凝土两者的极限承载能力的研究。

    Combined with contribution of restrained concrete of bearing components to limited-loading ability , it calculates limited-loading ability of components by large general procedure ANSYS and researches limited-loading ability of restrained concrete and un restrained concrete .

  8. 结果表明:加入短纤维的FRP加固混凝土结构的裂纹扩展缓慢,韧性得到改善,承载能力明显提高。

    It is revealed that the crack propagation is slow , and the mechanic properties of FRP strengthened RC beam with short fibers are thus improved in ductibility especially in carrying ability .

  9. 用静载和疲劳试验的方法,研究了DTS-1型预应力混凝土轨枕的承载能力,并分析了设计截面的合理性。

    By static and fatigue test , the load-bearing capacity of DTS-1 prestressed concrete sleepers is studied and the reasonableness of its designed cross-section is analysed .

  10. 以0.75t货车液压胀形桥壳为例,利用有限元分析软件ANSYS对其许用强度、静强度、疲劳强度(寿命)及其承载能力进行分析,得到液压胀形桥壳强度的变化规律。

    The allowable strength , static strength , fatigue life and load-carrying capability of hydro-bulged rear axle housing in a 0.75 t truck are analyzed using FEA software ANSYS and the variation rule of its strength is obtained .

  11. HPVC薄壁管性能测试及管土系统承载能力分析

    The Testing of the Characteristics of Thin-walled HPVC Pipes and the Analysis of the Loading Capacity of the Pipe-earth System

  12. 结果:在固定强度、刚度、稳定性、承载能力等方面GCC组均明显优于普通加压钢板(GCP)组。

    RESULTS : The effect of fixation strength , stiffness , stability and ultimate compress strength by GCC is better than that of general compress plate ( GCP ).

  13. 当表面修饰SiO2纳米微粒粒径小于15nm时,表现出优异的抗磨减摩性能和较高的承载能力。

    When the diameter is under 15 nm , the nanoparticles used as additive in oil show good friction-reducing , excellent antiwear and high loading capacity .

  14. 本文简要介绍了10m跨度的后张预应力悬臂结构的承载能力和变形试验性能以及在中央电视塔等一些新的预应力混凝土结构中的应用。

    This paper introduces the bearing characteristics and deformation of a post-tensioned concrete cantilever of 10 m span under loading test , and its practical application in new prestressed concrete structures , such as Beijing Central Television Tower etc.

  15. 本文讨论Robust桁架拓扑设计(TTD)问题,即桁架结构设计问题,使其在固定重量的情况下,具有最佳的承载能力。

    This paper deals with the ( robust ) truss topology design ( TTD ) problem , i.e. , the problem of designing a truss structure of a given weight which is best able to withstand a set of given loads .

  16. 该两种添加剂加入基础油改进剂中的摩擦学实验表明:SRT1和SRT2添加剂与基础油改进剂有良好的适应性,能使基础油改进剂的承载能力提高,减摩性能增强以及耐磨性能增强;

    The tribological test shows : two kinds of SRT additive are cooperated well with the improving addition of the basic oil , they provide excellent in load carrying property , good in antiwear , friction reduction .

  17. PHC桩承载能力高,贯入性能好,耐打,设计与施工灵活,因此近几年来厦门地区应用日益增多。

    During recent years , the Prestressed High Strength Concrete Pile ( PHC ) is more and more adopted in Xiamen due to its high bearing capacity , good penetration performance and durability in hammering , good flexibility in designing and construction .

  18. DIAM除了增加脊柱稳定性作用之外,在后伸位时小关节的应力更加均匀,后部结构承载能力增大,从而使得脊柱更加稳定。

    DIAM , in addition to increasing the role of spinal stability , make the zygapophysiales more uniform in extension position , increasing the carrying capacity of the rear structure .

  19. 从而为进一步深入研究落锤式弯沉仪(FWD)在各种路基、路面(刚性路面,柔性路面和复合式路面)以及建筑物地基的结构承载能力评价提供基础。

    Therefore practical and versatile analysis access is established for the Falling Weight Deflectometer ( FWD ) on evaluation of capacity of pavement ( subgrade , rigid pavement , flexible pavement and composed pavement ) and foundation of structures .

  20. 采用国内钢纤维混凝土实验方法,计算出弯曲韧性指数和承载能力变化系数,以此衡量RPC200的抗弯韧性,给出了钢纤维含量对RPC200韧性指数和承载力变化系数的影响规律。

    Then , the bending toughness index and variation coefficients of load-carrying capability are calculated according to test methods used for steel fiber reinforced concrete in China .

  21. 根据地下结构设计理论和岩石屈服的Drucker-Prager准则,考虑到了围岩的自身承载能力,采用有限元的分析方法对广西柳州一处公路隧道围岩的稳定性进行了分析。

    Following the theory of underground structure design and Drucker-Prager standard for rock yield , the wall rock stability of a highway tunnel in Guangxi was analyzed by finite element method , taking self bearing capacity of wall rock into account .

  22. 研究表明,该种新型井壁结构形式具有在井下装配后即可满负荷工作,承载能力大、受力特性好等优点,适用于400m以上深厚表土层冻结井外层井壁支护。

    Study indicates that , the new type shaft wall structure shape can work under full loading after assemblage in shaft , and it has great loading capability and good mechanics characteristics . It applied to outer shaft wall supporting in frozen shaft in deep alluvium which deeper than 400 m.

  23. 金属拱型波纹屋面结构承载能力研究综述

    Study on Load Ability of Struction of Metal Arched-Type Ripple Roof

  24. 用曲线积分计算桥梁正截面承载能力

    Bearing capacity of normal section for bridge calculated by curvilinear integral

  25. 结构疲劳累积损伤与极限承载能力可靠度

    Ultimate bearing capacity reliability of structures subjected to accumulated fatigue damage

  26. 对既有桥梁承载能力的评价方法的讨论

    Discussion of assessment methods about bearing capacity of the existing bridge

  27. 结构的设计要依据其荷载和承载能力。

    The design of structure depends on loads and bearing capacity .

  28. 水资源承载能力计算模型及关键问题

    Calculating model and key questions about carrying capacity of water resources

  29. 既有双曲拱桥承载能力的空间分析与评估

    Spatial Analysis and Assessment of Exiting Double-arched Bridge 's Loading Capacity

  30. 落地式钢板筒仓承载能力分析研究

    Analysis and Research on the Bearing Capacity of Ground-Supported Steel Silos