摩擦材料

Cu基金属陶瓷摩擦材料的成本优化研究

Study on Cost Optimization of Cu-base Ceramal Friction Material

超细γ-Al2O3对酚醛树脂基摩擦材料摩擦磨损性能的影响

Effect of ultrafine γ - al_2o_3 on Tribological Properties of phenolic resin-based friction material

Al2O3颗粒表面镀铜铁基摩擦材料的研究

Research on Frictional Material Prepared by Copper-coating Al_2O_3 Particles on Iron-based

而Mo固溶于基体铁对摩擦材料起到了固溶强化的作用，提高了材料的强度硬度。

The solution of Mo in a-Fe can strengthen the friction material and increase the intension .

SiO2和B4C的组合对铁铜基摩擦材料性能的影响

Effect of combination of sio_2 and b_4c on the properties of Fe-Cu based friction materials

MoS2对铁基摩擦材料烧结过程的影响

Effect of MoS_2 on sintering of iron based P / M friction materials

MoS2对铁基摩擦材料烧结行为及力学性能的影响

Effect of MoS_2 on the sintering behaviors and mechanical properties of iron-based friction materials

酚醛树脂的SiO2纳米复合对摩擦材料性能的影响

Influence on Rubing Material Performance of SiO_2 Nanometer Compounds of Phenol Aldehyde Resin

重点研究了SiO2和莫来石在铜基摩擦材料中的作用，比较了二者的不同。

The different effect between SiO_2 and mullite added to the copper-based friction material was investigated .

石墨含量与粒度对PPS基碳质摩擦材料性能的影响

Effects of Carbon Content and Granularity on Performance of PPS Base Carbon Friction Materials

石墨、SiO2在铜基摩擦材料基体中的摩擦学行为研究

Friction and wear behavior of graphite and SiO_2 in the matrix of Cu-based friction materials

本研究以来源丰富、价格低廉的Al2O3为基体，通过添加助烧剂和各种性能的调节剂，在常压低温下烧结得到了陶瓷基摩擦材料。

In this paper , Al_2O_3-based ceramic friction materials are sintered by Al_2O_3 , sintering agent and adding auxiliary materials under normal pressure and low temperature .

Kevlar短纤维对摩擦材料性能的影响效应

Effect of Short Kevlar Fiber on Performances of Friction Materials

利用层状结构六方BN优良的润滑特性，将其引入Al2O3陶瓷基体之中，制备了陶瓷摩擦材料。

The ceramic friction materials containing h-BN as solid lubricant component to utilize its better lubrication property have been synthesized .

Kevlar浆粕和冰晶石及硫酸钡在摩擦材料中的作用

Effects of Kevlar Pulp , Cryolite and Precipitated Barium Sulfate on Braking Friction Materials

Fe-Al金属间化合物基摩擦材料制备与摩擦磨损机制研究

Preparation and Study of Friction and Wear Mechanism of Fe-Al Intermetallic Base Friction Material

Fe3Al基复合摩擦材料的制备与研究

Preparation and Research of Fe_3Al-Based Composite Friction Material

研究了在CuFe基烧结摩擦材料中SiO2和SiC对材料的力学性能特别是摩擦磨损性能的影响。

The effect of SiO 2 and SiC on the physical and mechanical properties , especially friction and wear characteristics of Cu Fe based sintering friction materials has been studied .

研究了Cu-Fe基P/M摩擦材料金属基体中Fe、Cu含量变化对材料物理机械性能及摩擦磨损性能的影响。

Effect of iron concent on physical and mechanical properties as well as friction and wear characteristics of Cu-Fe base P / M friction materials was studied .

酚醛树脂（PF）由于具有较好的耐热性能和力学性能，是聚合物基摩擦材料使用最多也是最重要的一类基体材料。

With good heat resistance and mechanical properties , Phenolic resin ( PF ) is the largest and most important substrate material of Polymer-based friction material .

为Al2O3陶瓷摩擦材料的应用提供了实验参考。

Furthermore , the microstructure and properties of Al_2O_3-based ceramic friction materials are discussed by TG-DTA , XRD and SEM , which offer the experimental references for using Al_2O_3-based ceramic materials as friction materials .

石墨粒度对Cu-Fe基摩擦材料性能的影响

The Influence of Graphite Particle Size on Friction and Wear Properties of Copper-Ferrous Matrix Friction Materials

结果表明，随着Al2O3含量的减少，助烧剂AS含量的增大，摩擦材料的致密化程度整体为下降趋势；材料的摩擦系数逐渐减小，磨损率减小；

The study shows that friction coefficient , wear rate and mechanical properties of Al_2O_3-based ceramic materials all have the trend to decrease , with the amount of Al_2O_3 decreasing and the amount of sintering agent increasing .

为降低金属陶瓷摩擦材料的制造成本，介绍了Cu基金属陶瓷摩擦材料成本优化方案，并研究了优化方案对Cu基金属陶瓷摩擦材料性能的影响。

In order to reduce production cost of ceramal friction material , the cost optimization solution for Cu-base ceramal friction material is introduced , and the effect of the optimization solution on performance of the friction material is studied .

研究了0～10%的FeB对铁铜基摩擦材料性能的影响。

The effects of FeB ( 0 ~ 10 % ) on the properties of Fe - Cu based frictional materials were studied .

因此，研究开发具有优异综合性能的新型摩擦材料是十分重要而又迫切的。Al2O3是一种有着许多优良性能的重要特种陶瓷，在许多领域得到了广泛的应用。

Therefore , it is important and urgent to develop new kinds of friction materials with excellent properties.Al2O3 is a kind of special ceramic with outstanding properties , widely used in industry .

分析了Kevlar浆粕、冰晶石及沉淀硫酸钡对制动摩擦材料摩擦磨损性能、洛氏硬度及冲击强度的影响。

The effects of Kevlar pulp , cryolite and precipitated barium sulfate on friction and wear performance , Rockwell hardness and impact strength of friction materials were examined .

Al-MMC制动盘用树脂基摩擦材料配方及制备工艺研究

Research on the Formulation and Fabrication Process of Resin Matrix Friction Material Used for Al-MMC Brake Disc

采用X射线衍射和能谱微区成份分析的方法，深入系统地探讨了铁基摩擦材料中MoS2的烧结行为，同时研究MoS2对这些材料力学性能的影响。

The sintering behavior of MoS_2 in iron-based friction materials were studied through X-ray diffraction and energy dispersive X-ray . Effects of MoS_2 on mechanical properties of these materials were also studied .

通过实验研究了添加到铁基粉末冶金摩擦材料中的稀土在材料中存在的位置和状态以及稀土对MoS2分解所产生的影响。

This paper studied the effect on decompound of MoS_2 which is caused by the lanthanon that appended in iron based powder metallurgical material .