散热片

sàn rè piàn
  • fin;radiator;cooling rib;radiating rib
散热片散热片
  1. 针对CPU散热片现存生产方式的局限性,确定新的工艺方案,并开发出一套利用机械手送料的新型模具。

    This article analyses the limit of the existent production method of the CPU fin , makes a new process plan and designs a set of unique dies that make use of the transfer unit to send the material .

  2. 热传导:稳态与暂态热传导,平面壁,径向系统,散热片,总容量法。

    Conduction : steady and unsteady heat conduction , planar wall , radial system , fin , lumped-heat capacity method .

  3. CPU散热片挤压过程的数值模拟及模具优化

    Numerical simulation of CPU heat sink extrusion process and die optimum design

  4. CPU散热片成形过程中的三维有限元数值模拟

    3D Numerical Simulation of the Finite Element during the Deforming of CPU Fin

  5. 机械手在CPU散热片冷锻成形过程中的应用

    Applying the transfer unit to the cold forging forming process of the CPU fin

  6. CPU散热片的工艺制定及模具设计

    Process making and mold design of CPU fin

  7. 带散热片的管加热器CCD芯片热电制冷的非稳态传热研究

    Finned strip heater Experiment on the Unsteady Heat Transfer Process of Thermoelectric Cooling on CCD Sensor

  8. CPU散热片结构优化设计金刚石薄膜热沉的制备研究

    Research on Optimization of CPU Heat Sinks Fabrication of Heat Sinks Made of Vapor Growth Diamond Film

  9. CPU散热片温度场模拟分析及其材料和尺寸选择的研究

    Simulation of Heat transfer in the CPU ribbed radiator and selection for material and size for the radiator

  10. FDTD法研究散热片与器件间的耦合电容

    Application of FDTD method to analysis of coupling capacitance between heatsink and devices

  11. 用FDTD法分析散热片屏蔽层对耦合电容的时频特性影响

    Analysis of shielding effect on coupling capacitance between heatsink and power electronic device by FDTD method

  12. 所以本文提出了采用FDTD法计算散热片与器件间的高频耦合电容的构想。

    In this paper the coupling capacitance between the heatsink and the devices is calculated by FDTD method .

  13. 在GPU(图形处理单元)在许多现代显卡需要一个散热片和风扇。

    The GPU ( graphics processing unit ) on many modern graphics cards requires a heatsink and fan .

  14. 本文给出了电流源作为激励源情况下的FDTD方程,并给出了运用FDTD法计算不同激励源下,散热片的辐射电平的计算结果。

    In this paper , there are the FDTD equations about current source and the results of radiation of heatsink using different sources .

  15. 本文运用APDL(AnsysParameterDesignLanguage)语言,在ANSYS开发环境中对平板式散热片进行结构优化设计,并给出实例验证本文提出的方法。

    A method of designing and optimizing the plate-fin heat sinks using ANSYS parameter Design Language ( APDL ) was intro-duced in this paper , and an example was given to verify this method .

  16. 风冷柴油机散热片Nusselt数的数学模型研究

    A mathematic model study on Nusselt number of fins of a high speed aircooled diesel engine

  17. 在高性能胶片扫描仪中,CCD恒温制冷系统可以由温度传感器、半导体制冷器、可编程PWM脉冲发生器、散热片和风扇等组成。

    In high-property film scanner , a charge coupled device refrigeration constant temperature system is composed of the temperature sensor , the semiconductor cooler , the programmable PWM impulse generator , the radiator and the fan .

  18. 本文还论述了在胶片扫描系统中由温度传感器、半导体致冷器、可编程PWM脉冲发生器、风扇控制器、散热片和风扇等组成的温度控制系统的原理及实现方法。

    So this paper also introduces the theory and design method of temperature control system composed of the temperature sensor , the semiconductor cooler , the programmable PWM impulse generator , fan controller , the radiator and the fan .

  19. 该清洗剂对空调散热片铝片无腐蚀(R0)。

    Air conditioner cleaning spray was non-corrosive to aluminum of air - cooling fin .

  20. 针对散热片的成形工艺做了详细分析,就CPU散热片成形过程的难点加以阐述,并与机加工的材料利用率作了比较,确定成形工艺。提出了有效的成形方法:锻造。

    The article analyzes the forming process in detail , explains the forming difficulties of the CPU fin and compares the machine tooling with material utilization ratio to make sure the forming process and the effective forming method & forging .

  21. 本实用新型公开了一种串片式散热片高速折弯机,属于B23类。

    The utility model discloses a high-speed bender for strung radiating fins , which belongs to B23 type .

  22. 使用Saber软件模拟仿真,对比分析了电路中的无源寄生参数、IGBT集电极对散热片的寄生电容等参数对差模干扰和共模干扰的影响。

    And a high-frequency simulation modeling circuit is established with them . Using SABER software simulates the circuit , analysis the effects of passive circuit parasitic , the IGBT collector of heatsink parasitic capacitance parameter to common mode interference and differential interference .

  23. 高壁温条件下散热片组的优化研究

    An Optimal Research on the Fin Array at High Wall Temperature

  24. 电磁炉散热片尺寸优化试验研究

    Experimental Study on Size Optimization of Heat Sinks in Induction Cooker

  25. 散热片两片缝合处不允许有开口现象;

    The suture between the radiating fins shall not have openings ;

  26. 新旧散热片并排躺在地上。

    Old radiator and new radiator both lie on the ground .

  27. 热挤压法生产紫铜电脑散热片的研究

    Research on producing pure copper computer thermal fin with hot extrusion method

  28. 带散热片的管加热器中型的管状短片面食。

    Finned strip heater medium-sized tubular pasta in short pieces .

  29. 热挤压生产紫铜电脑散热片实验分析

    Experimental Analysis of Producing Computer Radiator by Hot Extrusion Process

  30. 空调机铝散热片表面无机亲水膜的研究

    Study of hydrophilic film on aluminium heat exchanger fins in air conditioners