油分离器

氨制冷系统洗涤式油分离器底部过热处理

Treatment of Over-Heat at the Bottom of Cleansing-Type Oil Separator in Ammonia Refrigeration System

用于来自油分离器的回油管路中润滑油的流动状况。

Used for the return pipe from oil separator the flow of lubricant in road condition .

杂醇油分离器在酒精生产中的综合效应

The Comprehensive Effects of the Separator for Fusel Oils in Alcohol Production

螺杆式冷冻机润滑油分离器的改造

Revamping of the Separator of Screw Refrigerant Compressor Oil

舱底水油分离器泄放柜高位报警。

Bilge water separator drainage tank high level alarm .

氨油分离器爆裂的材料失效分析

Analysis of the Material Failure of a Container for Separating Oil from Liquid Ammonia

多层板污水除油分离器的工艺计算

Process calculation of multi-plate oil water separator

根据杂醇油分离器在生产中的应用，就其产生的综合效应进行简单介绍。

According to the applications of the separator for fusel oils in alcohol production , the comprehensive effects were introduced briefly .

主要产品有：各种小机型机组的冷凝器、蒸发器、气液分离器、油分离器等。

The main products are : a variety of small models of the condenser units , evaporator , gas-liquid separator , oil separators and so on .

在油分离器中可快速与制冷剂实现分离。C3/MRC液化流程中原料气成分及制冷剂组分匹配

Facilitates rapid separation from the refrigerant in the oil separator Analysis for interrelations between mixed refrigerant composition and raw natural gas in C3 / MRC liquefaction cycle

因为油分离器结构设计存在的不合理，导致冷冻机润滑油不能彻底分离，进而影响了机组致冷能力和装置的运行。

Because of the unreasonable structure design of oil separator , the refrigerant compressor oil can ′ t be completely separated , adversely affecting the refrigeration ability and the plant operation .

研制了国内第一套由微通道换热器、变排量压缩机、套管式中间换热器、油分离器以及气液分离器等部件组成的二氧化碳跨临界汽车空调系统。

The new generation CO2 transcritical automobile air conditioning system has been established which consists of microchannel heat exchangers , variable displacement compressor , co-axial internal heat exchanger , oil separator and accumulator .

利用扫描电子显微镜对一台氨油分离器的爆裂断口进行了观察，分析了裂纹形成的机理，找出了容器失效的原因。

The fracture appearances of the exploded container for separating oil from the liquid ammonia are examined with a scanning electronic microscope , the mechanism for crack nucleation is analyzed , and the main reasons for the failure of the container are identified .

CFD技术在油气分离器改型设计中的应用

Application of CFD in the modification of an oil-gas separator design

GB/T31.2-1988六角头螺杆带孔螺栓细杆B级螺杆压缩机油气分离器的设计与应用

Hexagon bolts with split pin hole on shank Reduced shank Product grade B Design and Application on the Air / oil Separator for Compressor

本文应用Fluent软件对喷油螺杆式空气压缩机第一级油气分离器内的气液两相流流场进行了数值模拟。

The flow field inside an oil-gas separator are simulated with software Fluent .

本文介绍了一套燃油蒸发排放控制系统（EECS），此系统主要包括炭罐、清洗阀、油气分离器、翻车阀等。

In this paper , an EECS ( Evaporation Emissions Control System ), which includes the canister , purge valve , vapor-liquid separator , rollover leakage protection valve , is designed and tested .

螺杆压缩机油气分离器的设计与应用

Design and Application on the Air / oil Separator for Compressor

新型电潜泵用高效油气分离器的研究与应用

Study and application of new oil-gas separator for electric submersible pump

对油气分离器液面及压力控制的分析及改进

Analysis and advice for separator 's pressure and liquid level control

油气分离器内油滴轨迹的数值模拟

Numerical simulation of locus of oil droplet in oil-air separator

拆卸油雾分离器，检查o形圈，必要时请更换。

Remove oil mist separator , check O-ring and replace if necessary .

检查油雾分离器的密封件，必要时予以更换。

Check seals on the oil mist separator and replace if necessary .

信号交叉口延误计算方法的比较关键词：油气分离器机理研究仿真分析实验研究结构设计

Analysis and Simulation on Signalized Intersection Delay By the study of simulation

井下油气分离器分气效率影响因素

Affecting factors research on gas-separating efficiency of downhole gas / oil separator

航空发动机油气分离器分离技术的研究及结构设计

Study of separate technology of lubricant-air separator and structure design in aeroengine

完成了油气分离器性能试验装置设计和试验方案的设计。

The experiment equipment and blue print of the gas-liquid separator are designed .

泡沫原油油气分离器的研制

Development of Oil-Gas Separator Used for Foam Crude

介绍了油气分离器的分离原理和液面控制方法，提出了采用变压力液面控制方法。

Introduces the principle and methods of liquid level control of separators in compressor group .

现有油气分离器在高油气比油井中应用，分离效果差。

The existing oil-gas separators are used in high oil-gas ratio well with low efficiency .