流程制造

国内对MES的研究多集中于流程制造业，在船舶制造业方面的研究比较少。

The domestic research about MES concentrated mostly on the process manufacturing industry , and the research on ship manufacturing is relatively small .

本文针对传统的流程制造企业生产计划优化中存在的问题，研究了适合大型流程制造企业的生产计划优化模型及其算法实现。

In this paper , the optimization of production planning in large scale process manufacturing is discussed , the model for production planning and the algorithm of optimization is proposed .

本课题研究的管控一体化系统是针对流程制造业特别是热电厂的优化控制研究开发的管控一体化系统。也称计算机集成生产系统，即CIPS（ComputerIntegratedProductionSystem）系统。

This problem research management-control one system that aim at flow manufacturing especially thermoelectric power plant , also call Computer Integrated Production System ( CIPS ) .

目前，ERP应用的范围已相当广泛，包括工业、金融业、电信业、公共机构等，其中，推广到流程制造业后就被称为流程工业ERP。

At present , ERP application has been already quite widespread , including industry , financial industry , telecommunications industry , public entity and so on .

CIMS的概念扩展至流程制造企业，即形成了流程工业计算机集成制造系统CIPS。

The concept of CIMS is expanded to the manufacturing company of the procedure to process production enterprise systematic CIPS .

本文通过SPV法测试不同流程制造的P型抛光硅片中的铁沾污，找到了在P型抛光硅片制造工艺过程中引入铁沾污的主要来源。

In this work , the iron contamination on the polished silicon wafers fabricated by different procedures has been probed by SPV , and then the dominant iron contamination sources during the fabrication process have been found .

本文试图通过一个案例介绍一种在流程制造业更为有效的生产计划模式&过程流计划（PFS）。

In this paper , the Authors attempted to introduce a more effective framework for flow manufacturing scheduling systems & Process Flow Scheduling ( PFS ) by a case-study .

公司设计的DCS系统主要面对流程制造业，实时性的要求并不是非常高，数据量并不十分庞大，所以采用MODBUS已经足够使用，故我们选择了第二套方案。

DCS system designed primarily to manufacturing processes , real-time requirement is not very high , the amount of data is not very large , so MODBUS already enough to use , therefore we have chosen the second set of plan .

面向流程制造行业的协同商务模型及体系研究

Research on Collaborative Commerce Model and System Oriented to Process Industry

流程制造型企业的资源价值流转模型构建研究

Construction of Resource Value Flow Models of Process Manufacturing Enterprises

批流程制造执行系统及其过程建模研究

Research on batch manufacturing execution system and its process modeling

面向管控一体化的流程制造业综合监控平台研究

Research on management and control Integration based process industry general supervision platform

二水物真空冷却流程制造湿法磷酸的研究

Dihydrate process for manufacturing of phosphoric acid with vacuum cooling

中小型半流程制造业的生产作业调度系统研究与应用

Study on and Application of the Production Scheduling System for Small or Medium-sized Semi-process Manufacture

流程制造业生产作业计划模式研究

Study on Framework for Flow Manufacturing Scheduling

面向订单半流程制造业车间生产计划与控制的研究和应用

Research and Application on Workshop Production Plan and Control System Based on Make-To-Order in Semi-process Industry

采用一次性成型技术，减少罩杯与成品之间的加工环节，节约流程制造成本。

Adopting the one-time molding technology , it can reduce the process between the moulds and finished goods and save the costs of producing .

第四章主要探讨了制造企业知识管理实施模式问题，并分别就流程制造企业与离散制造企业提出了相应的知识管理实施框架。

The fourth chapter probes into the implementing mode of KM to two kinds of typical manufacture enterprise , and brings forward corresponding framework .

本文针对流程制造企业的管理模式和相应的供应链特点，采用多智能体技术建立基于预测的流程供应链模型。

Firstly this paper analyzes the features of enterprise management and supply chain in process industry , then a forecast based process supply chain model is proposed by multi-agent technology .

信息技术的快速发展为传统流程制造业带来了巨大的冲击，用先进的自动化与信息技术对其进行现代化改造是大势所趋。

The rapid development of information technology brings heavy impact on the traditional process industry . It is an important issue to reform it by using advanced automation and information technology .

因此，建立合理有效的生产计划与控制系统对于半流程制造企业适应市场需要，以及提高其竞争能力具有重要的意义。

So , it is very important for the semi-process industry to establish effective production plan and control system so as to adapt to market requirement and to improve its competent ability .

印染生产线是一个复杂的流程制造系统，存在着生产瓶颈不易诊断、设备利用率低等问题。

Based on the technological process characteristic research in the production line of printing and dyeing , a model of production line with extended stochastic high level evaluation Petri net was built .

为流程制造业新项目建设提供一套可供操作的项目管理方法和新的视角。

The aim of this research is to provide a practice means for management of new project of flow manufacturing , and also a new angle of view for management of similar project .

摘要激光制造是对一个国家国民经济影响最大的激光技术应用领域，包括船舶在内的运输机械轻型化和短流程制造是工业发展的新方向，激光是实现这一目标的首选手段。

The laser manufacture is laser technology application domain , which most influences the national economy , the light-duty transport machinery including shipping and the short flow manufacture are new direction of the industrial development , laser is the first choice means to realize this goal .

基于Agent的流程工业制造执行系统结构研究

Research on Agent-based MES Structure of Process Industries

ERP系统既能支持离散型制造环境，也能支持流程型制造环境。

A new generation of ERP can support both dispersion and flowing manufacture surroundings .

在此基础上，研究了流程工业制造执行系统中每个Agent的运作机制和多Agent之间的交互协调机制，为实现流程工业制造执行系统功能的合理调度打下了基础。

Moreover , researches are made on the circulating mechanism of each agent and the communication among multi-agents , so as to realize the appropriate schedule of MES for process industry .

结合生产流程与制造工艺，在OCV装配过程中对阀芯位移量进行测试，降低了次品率，控制了生产成本。

Due to production processes , the spool displacement of OCV can reduce the defect rate and control the cost of production .

生产流程是制造型企业至关重要的一个组成部分。

The production process is a part of manufacturing business critical .

六西格玛流程在制造企业的改进与应用研究

Improvement and Application Study of Six Sigma Process in Manufacturing Enterprise