液固界面

  • 网络liquid-solid interface
液固界面液固界面
  1. 用电子探针测定了铝合金中Al-1.35%Cu和Al-0.25%Cr在定向凝固过程中液固界面处的溶质分配系数。

    The electron microprobe was used to determine the solute distribution coefficient at liquid-solid interface in Al-1.35 % Cu and Al-0.25 % Cr alloys during directionally solidification .

  2. 液固界面的在线自动检测一直是工业领域中的一个难点。

    Liquid-solid interface , on-line auto-detection has been a difficult point in the industrial field .

  3. 液固界面内能的理论计算共析相变时Fe3C/α相界系统的内能和熵

    Internal energy and entropy about fe_3c / α phase interface system with the eutectoid phase transformation

  4. 液固界面反应法制备c-BN纳米晶

    Preparation of cubic-BN nanocrystals by liquid - solid interfacial reaction

  5. 连铸速度对纯金属Al凝固时固液界面的位置影响较大,随连铸速度增大,液固界面位置从型内向型外移动,与实验结果一致,说明采用计算机模拟技术是可行的。

    With the increase of drawing speed , the position of solid-liquid interface moves from the inner to the outer of the mould , and the result is conform to experimental result , showing the feasibility of numerical simulation technology on the computer .

  6. 反应型液固界面润湿性的数学表征

    Mathematical Description of Wettability of Reaction Type Liquid Solid Interface

  7. 水平液固界面上瑞利波辐射的有限模型

    A finite model for radiation of Rayleigh wave on liquid solid interface

  8. 液固界面处溶质分配的动力学模型

    A Dynamic Model for Solute Distribution at the Solid-Liquid Interface

  9. 引入液固界面效应的滴状冷凝传热模型过渡状冷凝传热模型

    Dropwise condensation heat transfer model with liquid-solid surface free energy difference effect

  10. 表面活性剂在液固界面吸附的热力学

    Adsorption thermodynamics of surfactant on liquid - solid interface

  11. 凝固界面生长形态是由材料液固界面性质和凝固驱动力的性质所决定的。

    Solidification interface morphology depends on the liquid-solid interface characteristic and solidification driving force .

  12. 有限入射声束在液固界面声反射的数值研究

    Numerical study of the reflection of a bounded acoustic beam at the interface between liquid and solid

  13. 当声束在液固界面掠入射时,反射声来显著变宽.文中还讨论了束宽对反射声束横截面上声场分布的影响。

    The effect of the incident beam width on the acoustic field at the reflected beam cross section is also discussed .

  14. 随连铸速度增大,液固界面位置从型内向型外移动。

    With the increase of drawing speed , the position of solid-liquid zone move from inner to outer of the mould .

  15. 膜拥有统一的孔径,从而也就有了能用于可重复的进行抗原抗体结合的液固界面。

    The membrane provides a uniform pore and , thus , a liquid – solid interface for reproducible antigen – antibody binding .

  16. 炉膛气氛中的氧分压大于液固界面(即生长界面)处熔体的氧离解压是生长完整晶体的前提条件;

    To form a perfect crystal it 's a necessary condition that the partial pressure of oxygen at the liquid-solid interface is higher than its decomposed pressure .

  17. 滴状冷凝传热不仅与冷凝条件有关,也与液固界面的相互作用有密切的关系。

    It is well known that dropwise condensation heat transfer performance depends on not only the condensing conditions , but also the interfacial interaction between liquid and solid .

  18. 在假定偏氯乙烯聚合反应发生在单体相和液固界面两个区域的基础上,提出了偏氯乙烯沉淀聚合反应速率模型。

    Based on the assumption that the polymerization of vinylidene chloride includes the reactions in monomer phase and on the interface between liquid and solid phases , a kinetic rate model was proposed for the heterogeneous polymerization of vinylidene chloride .

  19. 脉冲激光诱导液-固界面反应制备石墨相C3N4

    The Preparation of Graphite C_3N_4 by Pulsed laser Inducing Reaction at Liquid Solid Interface

  20. MC碳化物非平衡凝固液/固界面结构及生长机制

    Liquid / solid interface structure and growth mechanism of MC carbide under non-equilibrium solidification conditions

  21. 有限声波束在Rayleigh角附近从平面液-固界面上散射的新的统一理论

    A New Unified Theory for Scattering of A Bounded Acoustic Beam from A Liquid-solid interface Near the Rayleigh Angle

  22. 重力对GaSb熔滴和液/固界面交互作用的影响

    Effect of gravity on the wetting behavior of molten GaSb drop

  23. 混合粉末中Fe含量为40wt.%时,高过饱和度与过冷度导致液/固界面由原子尺度光滑向原子尺度粗糙转变,其生长机制转变为连续生长。

    Due to high supersaturation and undercooling , liquid / solid interface of TiC changes from smooth interface to coarse interface in atom scale , and its growth mechanism of TiC also changes to continuous growth .

  24. Pb-Al二元体系液-固界面自由能的热力学理论计算

    Thermal Theoretical Calculation of the Liquid-Solid Interfacial Free Energy in Pb-Al Binary System

  25. 结果表明,尽管MC碳化物的生长形态随着凝固冷却速度的变化而发生显著变化,但其液/固界面始终保持原子尺度上光滑。

    Results show that , within the present solidification cooling rate ranges , although the growth morphologies of the A / C carbide vary remarkable , the liquid / solid interfaces are always atomically smooth and the growth mechanisms are always lateral growth .

  26. 平行于液/固界面的层流对界面稳定性的影响

    Influence of laminar flow parallel to liquid / solid interface on interface stability

  27. 黄河水中无机固体粒子与4种重金属液-固界面的交换作用

    Liquid-solid interface interaction between inorganic solid particles and four heavy metals in the Huanghe River

  28. 考察了磷含量和凝固速度对蠕墨铸铁液-固界面形态的影响;

    The influences of phosphorus content and solidification rate on the interfacial morphology are investigated .

  29. 第三组分对阴离子表面活性剂在液/固界面吸附的影响

    The Effect of Third Components on the Adsorption of Anion Surfactant on Liquid / Solid Interface

  30. 环境因素对黄河表层沉积物与铜液-固界面相互作用的影响

    Effect of the different environmental factors to interaction between sediments and Cu in the Yellow River