火焰喷涂

火焰喷涂工艺对Al2O3陶瓷涂层的影响

Effects of Flame Spraying Process on Al_2O_3 Ceramic Coating

反应火焰喷涂Mo2FeB2金属陶瓷涂层的组织和性能

Microstructure and Properties of Mo_2FeB_2 Ceramic Coating by Reactive Flame Spraying

超音速火焰喷涂Fe基非晶合金涂层的性能研究

Properties of Iron Base Amorphous Alloy Coatings by High Velocity Oxy-fuel Spraying

Al2O3复相陶瓷涂层的SHS反应火焰喷涂过程

Investigation on Process of SHS Reactive Flame Spraying Al_2O_3 Multiphase Ceramic Coatings

Al2O3弥散强化316L不锈钢粉末的高速火焰喷涂

High velocity oxy-fuel spraying of Al_2O_3 dispersion strengthened 316L stainless steel powders

SHS火焰喷涂Al2O3基复相陶瓷涂层机理

Mechanism of SHS reactive flame spraying al_2o_3-based multiphase coating

亚音速火焰喷涂Y2O3-HA生物涂层的研究

Study on Subsonic Flame Sprayed Coating of Y_2O_3-HA

空气助燃超音速火焰喷涂WC涂层的性能及应用

Properties and Application of WC Coating Prepared by High Velocity Air Fuel

火焰喷涂尼龙/纳米TiO2复合涂层性能的研究

Properties of Flame Sprayed Nylon 1010 / Nano TiO_2 Composite Coating

Al2O3对高速火焰喷涂镍基涂层抗热疲劳性能的影响

The Influence of Al_2O_3 on the Thermal Fatigue Resistance of Ni-Based Coating Prepared by High Velocity Air Fuel Spraying

SHS反应火焰喷涂Al2O3陶瓷涂层修复工艺研究

Research on the Repairing Technology of the SHS Reaction Flame Spraying to Prepare Al_2O_3 Ceramic Coating

纳米SiO2对火焰喷涂尼龙1010涂层力学性能的影响

Mechanical Properties of Flame Sprayed Nylon-1010 / Nanometer SiO_2 Composite Coating

团聚粉粒度对反应火焰喷涂Al2O3基金属陶瓷复相涂层性能的影响

Influence of the size of the agglomerate on the properties of the Reactive Flame Spray Al_2O_3-base metallic ceramic multiphase coatings

采用火焰喷涂技术对基体金属表面喷涂Al2O3陶瓷。

Flame spraying technique was employed to spay Al2O3 ceramic coating on metallic surface .

火焰喷涂聚酰胺12/纳米SiO2涂层的摩擦磨损性能

Friction and Wear Behavior of Flame-Sprayed Polyamide 12 / n-SiO_2 Composite Coatings

此外，进一步研究了火焰喷涂方法对Fe基非晶合金涂层组织结构与性能的影响。

In addition , the thermal spraying technologies on microstructure and properties of Fe-based amorphous coating were also studied in this paper .

聚苯硫醚（PPS）粉末火焰喷涂技术初探

The Tentative Study on the Technology of Flame Spraying Polyphenylene Sulfide Powder

超音速火焰喷涂WC涂层替代电镀硬铬：疲劳和摩擦磨损性能

WC coatings as candidate to hard chrome plating : characterization of fatigue and friction and wear

Fe在反应火焰喷涂TiC-Fe涂层过程中的作用

The Influence of Fe on the Process of Reactive-flame-sprayed TiC-Fe Coatings

SHS反应火焰喷涂团聚颗粒的熔融行为及机理分析

The melt behavior and mechanism analysis of agglomerate particles in SHS reactive flame spraying

超音速火焰喷涂WC-Co涂层结构的研究

Study of structure of WC-Co coatings sprayed by high velocity flame

SHS反应火焰喷涂TiC-TiB2梯度过渡陶瓷涂层摩擦磨损机理研究

Study on Abrasion Mechanism of TiC-TiB_2 Graded Ceramic Coatings by SHS Reactive Flame Spray Process

工艺参数对在A3钢上火焰喷涂不锈钢结合强度的影响

The effects of technological parameters on the bond strength of Flame Sprayed Stainless Steel Coatings

利用电子拉力机探讨了纳米TiO2对火焰喷涂尼龙1010涂层力学性能的影响。

The influence of the mechanical properties of flame sprayed nylon 1010 / nanometer TiO_2 coatings were studied by universal testing instruments .

温度对火焰喷涂FEP涂层制备及摩擦学性能的影响

Influence of Temperature on Tribological Properties and Preparation of Flame-sprayed FEP Coatings

Ti-B4C-C系在火焰喷涂时的SHS过程

SHS Process of Ti-B_4C-C Reactive System in Flame Spraying

火焰喷涂聚苯硫醚（PPS）复合涂层在水环境中的摩擦磨损性能研究

Tribological Behavior of POLY ( Phenylene Sulphide ) Coating and Carbon Fiber Reinforced Composites Coating under Dry Sliding and Water Lubrication

采用钛铁、石墨、铁粉和高碳铬铁为原料，利用反应火焰喷涂技术制备了CrFeTiC系涂层。

Using ferrotitanium , graphite , iron and high carbon containing ferrochromium as raw materials , the coatings of Cr Fe Ti C System were obtained by Reactive Flame Spray ( RFS ) .

利用火焰喷涂在不同预热温度制备了FEP涂层，评价了环境温度对涂层摩擦学性能的影响，并对涂层进行了XRD、SEM等分析。

FEP coatings were prepared using flame spraying . The influence of the substrate temperature on the tribological properties and preparation of the coatings were investigated .

Ni对超音速火焰喷涂合成TiC-Ni涂层组织和耐磨性能的影响

Influence of Ni on the Microstructure and Wear Resistant Properties of Reactive High Velocity Oxy-fuel Flame Spraying TiC / Ni Coatings