真空机

从真空机内取出铸造瓶，然后放在焗炉内。

Remove the flask from the vacuum mixer and place in the oven .

集成式真空包装机CAD软件包

The Integrative CAD Software for Vaccum Packing Machine

采用单片机及PLC真空回潮机控制系统

Vacuum Reversion Machine Control System Using Singlechip and PLC

基于BP网络的真空灌封机故障自诊断系统

Vacuum Epoxy Dosing Equipment ′ s Fault Diagnosis System Based on BP Neural Network

用PLC实现的磁溅式三靶真空镀膜机控制系统

The Control System of a Magnetic Scattering Vacuum Three-target Film Coating Machine Realized by PLC

PLC控制的真空加注机控制系统设计

The design of control system for the vacuum filling machine under the control of PLC

基于FPGA的真空镀膜机控制系统参数设定和调用模块的设计

Design of the Parameter Setting and Transferring Module of SCS Control System Based on FPGA

本文介绍的集成式真空包装机CAD软件包，将HIGH。

This paper deals with the CAD software package for the integrative vacuum packing machine , which combines HIGH .

PVC制品成型加工的真空吸塑机的研发

Development of PVC product vacuum forming machine

DI型移动室带式真空滤机控制回路的改造

Improvement of the Control Loop in Band Vacuum Filters of DI Movable-House

本文阐述了以PLC和触摸屏为核心的低功耗真空镀膜机自动控制系统。

This article introduces the low - power - consumption automatic control system on a magnetic scattering vacuum three - target film plating machine .

XZD&500／2S旋转式真空包装机的研制

The Study on XZD ─ 500 / 25 Rotary Vacuum Packaging Machine

本文进行了对模具表面离子镀TiN薄膜的研究，本实验采用直流二极型离子镀，实验设备是由一台真空镀膜机改装而成。

Type ⅱ electrode dc ion plating was adopted in this experiment . A vacumm coating machine was refitted as the experimental equipment .

真空成型机温度场的建模、测量与控制技术研究用于单片集成真空传感器的SAR型ADC设计

Study of Modeling , Measurement and Control Technology about Vacuum-Forming Machine Temperature Field ; Successive approximation register ADC for monolithic vacuum sensor

无排气管VFD真空排气机控制系统应用研究

Applied Study on Control System of VFD Vacuum Exhaust Machine Without Vent-Pipe

介绍了基于AVR单片机的真空包装机的结构与功能；

The structure and function of the vacuum packing machine is introduced based on the AVR micro controller .

DI型移动室带式真空滤机在催化剂二套分子筛车间生产过程中承担着回收液的过滤、洗涤任务。

Band vacuum filters of DI movable house undertake to filtrate and wash the recovery liquid in the process of production of catalystic sieve shops .

一台DMD-450型真空镀膜机低能X射线的剂量水平

Dose level of low energy X-ray radiation generated by a vacuum coater in the Institute of Northwest dispatch Engineering

在Pro/E软件中对真空挤出机分体式螺旋绞刀进行建模，并且对其进行装配，然后将装配模型导入到Workbench软件之中。

Modeling the vacuum extruder split spiral reamer in Pro / E software , and assembly , the assembly model is then imported into the Workbench software .

根据厂家工艺要求和技术参数，以PLC、触摸屏作为硬件开发平台，设计三靶磁溅式真空镀膜机的电气控制系统。

According to technology requests and technical parameters , using the PLC and a touch screen as a platform of hardware development , the system of electrical control with three-target magnetic scattering vacuum film coating machine has been designed .

也对PLC、继电器控制和通用系统机控制作了相互比较。并以FX2型PLC为例，介绍在真空镀膜机上的应用。

Then , it makes a comparison among the PLC , the relay , and the general system , Finally , it gives an example of applying FX2 & type PLC in vacuum coater .

开发了一个朗缪尔探针等离子体诊断系统对PECVD真空镀膜机进行了等离子体参数诊断。

A new plasma diagnostic system with Langmuir probe is designed to measure the plasma parameters in a plasma enhanced chemical vapor deposition ( PECVD ) vacuum coating machine .

试验以Ti2O3、Ti3O5和TiO2作为初始膜料，在ZZS700-6/G型真空镀膜机上采用O2-离子束辅助蒸发制备氧化钛薄膜。

TiO_2 thin films were prepared with Ti_2O_3 , Ti_3O_5 and TiO_2 as original materials by electron-beam evaporation deposition , using O ~ ( 2 - ) ion beam ( O_2 purity up to 99.99 % ) as auxiliary means .

ZG-15型感应卷绕式真空镀膜机卷绕系统的电气控制

Electrical Control of ZG-15 Induction Winding Vacuum Coater

主要完成的研究内容包括：（1）对泥料的流变模型进行了研究，并运用APDL建立了真空挤出机挤出段中泥料的几何模型。

The main study contents include : ( 1 ) The mud rheological model was studied , and the geometric model of the mud in extrusion region of the vacuum-extruder was modeled with APDL .

ZZ-3200J型高真空镀膜机的研制

Study on the High Vacuum Coater , ZZ-3200J

MGB-24真空镀膜机的计算机控制

Computer Control of MGB-24 Vacuum Film-Plating Machine

双带式真空贴膜机725/DB被设计用于连线真空贴膜，可适用于一次成像干膜，阻焊干膜，非传导性膜和满足SBU技术的铜箔。

The Dual Belt Vacuum Applicator Mod.725/DB has been designed for in-line vacuum application of primary imaging dry film , solder mask , dielectric film and copper foil for SBU technology .

另外，根据射频补偿原理设计了用于降低射频干扰的扼流线圈，制作朗缪探针并安装于RF-500型真空镀膜机上。

In addition , chocks are designed to reduce radio frequency interference based on RF compensation theory , and self-made Langmuir probe is installed on RF-500 vacuum filming machine .

真空镀膜机卷绕系统中张力控制的研究

Study on Tension Control in Winding System of Vacuum Coating Machine