第三相

  • 网络third phase
第三相第三相
  1. N(235)萃取Pt体系产生第三相的影响因素

    Effect factors of third phase produced by N_ ( 235 ) extracting Pt system

  2. TOA·HA第三相研究三辛胺萃取草酸的机理

    Study on TOA · ha third phase extraction mechanism of oxalic acid by toa

  3. TOA·HA第三相研究

    Study on TOA . Ha third phase

  4. 加改性剂TBP(磷酸三丁酯)后,第三相消失。

    With the addition of the modifier TBP in the organic phase , the third-phase disappeared .

  5. 研究了以TBP从盐酸溶液中萃取分离锡与锌,发现如用煤油作稀释剂,则萃取过程会出现第三相。

    The present paper relates to the study on the extraction of tin and zinc from hydrochloric acid solution by TBP .

  6. 就有机溶剂、原液对铜萃取过程中产生第三相的影响进行了研究。指出调整原液pH值,降低原液悬浮物含量可有效减少第三相的产生。

    Introduction is given to research on organic solvent and raw liquor that affect generation of third phase during copper extraction and proposal is made to slow down generation of third phase by adjusting pH value of raw liquor and reducing suspension in the raw liquor .

  7. 为解决此问题,采用了一种未见报道的萃取有机相配方,不仅成功的消除了第三相,而且使Ga的萃取率达到了95%以上。

    To resolve this problem , a new method on the composition of organic phase is adopted , this method not only successfully eliminated the third phase , but also make the extraction rate of gallium reach up to more than 95 % .

  8. 铜萃取过程第三相形成机理及防治方法研究

    Crud formation causes in copper extraction process and studies thereof

  9. 萃取第三相形成过程中废水处理的去污机理

    Decontamination mechanism in process of third extracting phase formation for wastewater treatment

  10. 第三相界面对高分子共混物粗化过程的影响研究

    Studies on the Effects of the Third Phase on the Coarsening of Incompatible Polymer Blends

  11. 对于填充得不饱和的材料而言,还考虑了第三相问题。

    Under the unsaturated condition of interstitial fluid , the third-phase is taken into consideration .

  12. 第三相是流动和沉积物运输的流体相。

    The third phase is the fluid one , which consists of the water flow and sediment transition .

  13. 磷酸三丁酯萃取钚(Ⅳ)时生成第三相的研究

    Investigation on the formation of a third phase in the extraction of pu (ⅳ) nitrate with tributyl phosphate

  14. 在液相吸收剂中加入第三相微粒是强化气液吸收传质过程的重要手段之一。

    By adding the third phase particles into the liquid absorbent is the important method to enhance the traditional gas-liquid mass transfer process .

  15. 在传统粉末冶金工艺的基础上,通过在坯体上方添加第三相金属锌来制备硅颗粒增强铝基复合材料。

    Based on the traditional power metallurgy technique , Si particle reinforced Al matrix composite was fabricated by adding zinc on Al and Si powder block during sintering .

  16. 实验数据还表明:纤维的收缩率与收缩前后“第三相”指数之差呈良好的销性关系。

    The experimental data also indicate there is linear relationship be-tween the shrinkage of sample fibers and difference between " third ph-ase " index before and after thermal contraction .

  17. 不过,如果血浆浓度监测时间够长的话,你就会发现药物分布的第三相,此时,药物便缓慢地从脂肪组织释放出来。

    However , if plasma concentration is monitored long enough , a third phase of distribution , in which the drug is slowly released from fat , can be distinguished .

  18. 研究了陶瓷种类、陶瓷烧结温度以及第三相改性添加剂对复合电接触材料电性能和机械性能的影响规律。

    The law how species and sintering temperature of ceramics and the third addition have effect on the electrical and mechanical properties of the composite contact materials were studied in this thesis . 1 .

  19. 提出了第三相形成是由于有机相中各组分形成了一个部分互溶体系,在一定条件下发生相分裂,从而导致第三相的形成。

    Proposed mechanism of third phase formation is that the components in the organic phase form a partial miscible system , in which the phase splitting can occur at a certain condition and the third phase can form .

  20. 通过向银基体中掺入不同比例导电陶瓷,以及第三相金属或金属氧化物,探讨其对于触点材料转移、烧损、电学、燃弧性能的影响规律。

    Mix conductive ceramics and metal or metal-oxide which acts as the third phase into silver matrix in different proportions , and then discuss its effect on the arc corrosion . mass transfer , electrics and arc blazing time performances of the contacts .

  21. 本论文开展了以离子液体[A336][C272]、[A336][P507]、[A336][P204]与稀土元素形成配合物的合成研究及表征,从第三相中合成了三类稀土配合物。

    In this thesis , we have investigated the synthesis and characterization of the complexes . The complexes are composed by rare earth elements and ionic liquid [ A336 ] [ C272 ] , [ A336 ] [ P507 ] or [ A336 ] [ P204 ] .

  22. 这种结构比强度、比模量高,损伤容限和断裂韧性高,制件可一次成型复杂的零部件,并可与第三相复合形成力学性能优良的制品。

    This structure has high strength and modulus , its damage tolerance and the fracture toughness is also very high . The product can mold complex parts and components . And it can form with the third phase as excellent composite products which have good mechanical properties .