简支梁冲击强度

  • 网络Charpy impact strength
简支梁冲击强度简支梁冲击强度
  1. 结果显示,苯乙烯类树脂具有最好的增韧效果,当其含量达到40份时,能使PS体系的简支梁缺口冲击强度达到42.1kJ/m2。

    Experimental results indicated that styrene resins have the best toughening effect and the notched Charpy impact strength was up to 42.1 kJ / m 2 when its content is 40 phr .

  2. 在β成核剂质量分数为0.6%时,β晶相对含量最高,简支梁缺口冲击强度和断裂伸长率达到最大值,皆为纯PP的2倍多。

    When 0.6 % β nucleating agent was added , the relative β crystalline fraction was the highest , so the Charpy notched impact strength and the elongation at break came up to the highest level , being more than two times of that of pure PP.

  3. 研究表明,纳米SiO2质量分数为4%的复合材料性能提高较为明显,其中简支梁缺口冲击强度提高51.3%,断裂伸长率提高47.3%,弹性模量提高23.8%;

    The results show that the properties of composite material ( mass fraction of SiO_2 is 4 % ) are improved obviously , the impact strength breakage elongation and elastic modulus of the composites are improved by 51.3 % , 47.3 % and 23.8 % , respectively .

  4. 材料力学性能优异,拉伸强度和简支梁缺口冲击强度分别达104MPa和6.1kJ/m2。

    The tensile and Charpy notched impact strength of the sample were 104 MPa and 6.1kJ / m2 , respectively .