绝缘材料

电机F级绝缘材料和绝缘结构

F-Level Insulation Material and Insulation Structure of Motors

制备了用作燃煤磁流体发电通道绝缘材料的Sialon试样；

Sialon blocks for channel insulation in coal-fired MHD generation were fabricated .

产品构造：由绝缘材料胶壳、铜制端子、P数等组成。

Speciality : Product structure : insulated gluey shell , coppery terminal , pin qty etc.

高压绝缘材料在便携式X射线像增强仪中的应用

The application of high-pressure insulating materials in the portable X-ray image intensifier

一种用非晶硅作绝缘材料的MISS器件

MISS Devices with Insulating a - Si Layer

ZnO压敏陶瓷与有机绝缘材料间界面电荷及其作用

Interfacial charge between ZnO varistor ceramics and inorganic insulating materials and its role

燃煤MHD发电Al2O3基电极间绝缘材料抗裂性的改善

Improvement of Crack Resistance of Al_2O_3 Base Interelectrode Insulator Materials for MHD Power Generation

新型高压电机用F级VPI绝缘材料

New Type F-Class VPI Insulate Material for High Voltage Generators

绝缘材料受热对SF6气体分解物影响的试验研究

Experimental Study on Thermal Influence of Insulating Material on SF_6 Gas Decomposition

上述的某些绝缘材料在受到几千伦琴的X辐射照射后，其电阻率会出现暂时性的减少。

The resistivity of some of the insulating materials mentioned above is temporarily impaired by exposure to a few thousand roentgens of X radiation .

磁流体（MHD）发电通道绝缘材料的新发展

The Latest Development in Channel Insulator of MHD Generator

DMC是我国近几年发展起来的新型绝缘材料，用途十分广泛。

DMC is a new kind of insulating material developed recently and used widely in China .

作为绝缘材料的SF6气体在高压、超高压断路器中得到了广泛的应用。

SF6 gas is used as insulating material in high voltage , EHV circuit breaker widely .

PET是电气绝缘材料，当其受到长时间强电应力作用时，会由于多种原因发生击穿，导致其绝缘寿命终止。

PET is electric insulation . It maybe broken down for many reasons and leads to end of its life when it is exposed to stress for a long time .

SiO2/Si3N4/SiO2/Si多层结构绝缘材料在俄歇分析中的电子束和离子束辐照效应

Electron and ion beam irradiation effects in AES analysis of sio_2 / si_3n_4 / sio_2 / si multilayer dielectrics

研究了基于绝缘材料上的硅（SOI）材料的平面波导刻蚀光栅分波器的主要制作工艺。

The fabrication process of a compact planar waveguide etched-grating ( EDG ) demultiplexer based on silicon-on-insulator ( SOI ) is studied .

目的为船舶舱室能否使用新型（MBP）隔热绝缘材料作安全性评价。

Objective To evaluate the safeness of using a new type adiabatic insulation material ( MBP ) in naval vessels .

叙述了用凝胶渗透色谱（GPC）对多元共混方法制得的聚丙烯改性绝缘材料的相对分子质量及相对分子质量分布的表征研究，并就其对材料的加工应用性能的影响进行了初步探讨。

The characterization for the relative molecular mass and the relative molecular mass distribution of modified polypropylene blend was studied by gel permeation chromatography .

聚对苯二甲酸乙二脂[poly（ethyleneterephthalate）-PET]是乳白色或浅黄色、表面平滑有光泽，高度结晶的聚合物，广泛的应用于电气绝缘材料。

[ Poly ( ethylene terephthalate ) - PET ] milky white or yellow , height crystalline polymer and Surface smooth sheen is widely used in electric insulation .

通过差示扫描量热法、X射线-衍射试验研究了辐照交联聚乙烯绝缘材料的结晶形态，发现高密度和低密度聚乙烯辐照交联效应有明显差异。

The differential scanning calorimeter ( DSC ) and X-ray diffraction are used to research the crystalline morphology of the irradiated cross-linked PE insulation materials . There is obvious difference on irradiation crosslinking effect between HDPE and LDPE .

以HDPE和EPDM为基体，加入低卤阻燃剂，并经γ辐照，制备了耐温125℃的阻燃电缆绝缘材料。

By blending low-halogen flame-retarding agent with the basic resin and using γ irradiation FR-HDPE / EPDM for cable and wire insulation with 125 ℃ heat resistance was prepared .

重点介绍了电机F级绝缘材料的性能分析和选择，从介电性能和相容性角度，阐述了高、低压电机F级绝缘结构的设计要点。

Characteristics and selection of F-level insulation material of mo-tors are introduced in detail . Design keys of F-level insulation structure of highvoltage motors and low voltage motors are Presented from the point of view of di-electric characteristics and consistency .

重点详细介绍了有机硅橡胶（SR）与脂环族环氧树脂（HCEP）等常见绝缘材料的化学与物理特性以及在高压户外绝缘子制造中的应用情况。

The chemical and physical characteristics and the applications in produc ˉ tion of high voltage outdoor insulator of two common outdoor polymer materials , including silicon rubber and hydrophobic cycloaliphatic epoxy are mainly introduced .

测试数据表明复合膜的表观分解温度TA为223.41℃，耐热指数TZG为158.95，其它各项性能指标均能满足F级绝缘材料的要求。

TGA shows that the heat decomposition temperature is 223.14 ℃ and the film heat resistant index is 158.95 . All properties of the new type insulating composite film can satisfactorily meet reguirements of class F insulating material .

介质阻挡放电（DBD）用于绝缘材料表面改性是当前等离子体和材料改性领域的热点研究问题之一。

The use of dielectric barrier discharge ( DBD ) for surface modification of insulating materials is the main research topics in the field of plasma and material modification .

用绝缘材料NiO作钉扎层，在大磁场中淀积了NiO/Co/Cu/Co/NiFe底自旋阀，其最大MR值达6%。

Biased with insulting antiferromagnetic NiO layer , NiO / Co / Cu / Co / NiFe bottom spin valves multilayer films are fabricated in a large deposit magnetic field . The maximum MR value of latter structure is 6 % .

利用DGA进行设备内部故障判断的原理正是基于绝缘材料的这种产气特点。

With method of DGA to judge the failure inside the equipment is just according to the principle of the gas produce characteristic of the insulation material .

当前绝缘材料行业和CCL行业所使用的废气焚烧炉有所谓的直燃式废气焚烧炉（称TO）和蓄热式废气焚烧炉（称RTO）。

In CCL and insulation material industry , the current use burning oven types are direct burning oven ( to ) andheat reserve burning oven ( RTO ) .

本文综述近几年来磁流体（MHD）发电通道绝缘材料的新发展，在燃油MHD发电通道中，MgO，Al2O3等氧化物材料仍作为半热壁和热壁通道绝缘材料继续探讨。

In this paper , the study of late years on channel insulator for MHD generator was described , MgO Al_2O_2 oxides that use for channel insulators of sami-hot wall and hot wall at oil fired MHD generator was continually investigated .

在SiO2/Si3N4/SiO2/Si多层绝缘材料的俄歇分析中往往给出一个错误结果，即在SiO2/Si界面处产生一厚度为数nm的附加富氮层。

During Auger depth profile analysis of SiO_2 / Si_3N_4 / SiO_2 / Si multilayer dielectrics , an erroneous result was usually given by creating about several nm thick nitrogen rich additional layer at the SiO_2 / Si interface .