胎圈
- tire bead
-
分别建立了组合花纹、横向花纹、纵向花纹轮胎全局模型,基于组合模型技术建立了组合花纹轮胎胎圈部和胎冠部模型,并基于子模型技术建立了组合花纹轮胎胎冠部的子模型。
The global model with combined pattern , lateral pattern and longitudinal pattern are established . Tire bead and crown of combined pattern are established based on the combined modeling technique respectively , crown submodel of combined pattern is established based on the submodel technique . 3 .
-
钢丝加强层帘线角度对全钢载重子午线轮胎胎圈性能的影响
Effect of enhancing steel cord angle on properties of TBR tire bead
-
胎圈用钢丝青铜镀层中Sn含量的测定
Determination of Sn Content in Bronze Coat on Bead Wire
-
防焦剂CTP在轿车子午线轮胎胎圈护胶中的应用
Application of anti-scorching agent CTP in bead chafer of PCR tire
-
胎圈直径减小1mm;
The bead diameter was decreased by 1 mm ;
-
试验研究防焦剂CTP减量对轿车子午线轮胎胎圈护胶喷霜的影响。
The influence of anti-scorching agent CTP on blooming from bead chafer of PCR tire was experimentally investigated .
-
同时运用帘线轴力、Mises应力、剪切应变、应变比能4个力学量对胎圈部的危险区域进行了精细分析。
Then the hazard zone of tire / rim contact area with axial force of cord , Mises stress , shearing strain and strain energy potential were analyzed .
-
对于LCX-4B工程轮胎成型机的扣圈装置&扣圈盘系统,以及胎圈在轮胎成型中的地位作了详细的理论与实验性的分析研究。
As the importance technology of the tire-building machine , push-wheel system is described detailedly through theoretical and experimental analysis in the paper .
-
对比国产和进口锂系低顺式聚丁二烯橡胶(LCBR)在全钢载重子午线轮胎胎圈护胶中的应用效果。
The application of domestic Li low cis polybutadiene rubber ( LCBR ) in the chafer compound of all steel radial truck tire was investigated by using an imported LCBR as control .
-
MARC软件对子午线轮胎的滚动阻力进行了三维有限元分析计算,对轮胎的胎体、带束层、胎圈等部位采用了rebar膜单元以及rebar实体单元进行模拟,采用Yeoh材料模式描述橡胶材料。
Three dimensional finite element analysis of radial tire rolling resistance is carried out with MSC . MARC software . Tire core , thread ply and tire bead are simulated with the rebar membrane element and the rebar solid element , and rubber is described with Yeoh material mode .
-
锦纶包布对全钢载重子午线轮胎胎圈性能的影响
Influence of nylon flipper on performance of bead in TBR tire
-
回火轮胎胎圈钢丝表面镀层量的测定
Determination of Adherent Quantity of Coating on Tempered Tire Bead Wire
-
长齿顶齿轮;径向正变位齿轮;径向正变位齿轮力车轮胎胎圈着合直径
Long addendum gear bead diameter at rim seat of cycle tyre
-
力车轮胎胎圈着合直径一级行星齿轮轴座圈
Bead diameter at rim seat of cycle tyre primary planet ring
-
大盘重连续化生产回火胎圈钢丝工艺技术
Technology for Producing Tempered Bead Wire Continuously with Heavy Coil
-
化镀锡青铜回火胎圈钢丝生产工艺技术
Production Technology of Tempered Bead Wire with Chemical Plating Bronze
-
胎圈钢丝化镀锡青铜工艺研究
Technology Research of Bronze-plating by Chemical Displacement on Bead Wire
-
载重子午线轮胎锦纶胎圈包布挂胶配方的改进
Improving coating compound for nylon bead flipper in BTR tire
-
我国胎圈钢丝标准的演变我国钢丝电阻系数试验方法标准剖析
Analyse Internal Standard of Experimental Method for Measuring Steel Wire Resistance Coefficient
-
成品工序工艺对回火胎圈钢丝黏合力的影响
Influence of finished product procedure process on tempered bead wire adhesion force
-
回火胎圈钢丝生产探讨
An Approach to the Production of Tempered Tire Bead Wire
-
电镀低锡青铜回火胎圈钢丝生产工艺研究
Production Technology Research of Electroplating Low-Sn-bronze for Tempered Bead Wire
-
胎圈钢丝的基本特性对轮胎性能的影响
Influence of Basic Characteristics of Bead Wire on Tire Performance
-
胎圈钢丝回火处理工艺的试验研究
Experimental Study on Tempering Process of Tempered Bead Wire
-
影响电镀紫铜胎圈钢丝粘合力因素的工艺探索
Technology Study of Factors Affecting Binding Force of Electroplating Copper on Bead Wire
-
胎圈用扁钢丝生产线设计与研究
Design and Research of Flat Bead Wire Production Line
-
不得将胎圈压在车轮电子设备单元上。
The tyre bead must not be pressing against the wheel electronics unit .
-
否则,胎圈可能被夹住,并遭受无法修复的损坏。
Otherwise , the tyre bead can become jammed and be damaged irreparably .
-
胎圈钢丝与橡胶粘合力试验中的注意事项
Matters Needing Attention in the Test for Binding Force of Bead Wire with Rubber
-
全钢载重子午线轮胎胎圈包布宽度优化分析
Optimized analysis on chafer width of TBR tire