表面合金化

Al离子高温注入Fe靶的表面合金化研究

Surface alloying of Al ion implantation into Fe target at elevated temperature

采用SEM、X射线、光学显微镜、显微硬度计等手段研究了高能密度光束表面合金化的机理和工艺。

In this paper the mechanism and process of light beam surface alloying were investigated by SEM , X-ray diffraction , optical microscope , microhardness etc.

Ac对消失模铸渗铁基表面合金化影响的研究

Influence of Ac on Surface Alloying of Cast Iron by Casting-infiltration in EPC

Ti-6Al-4V合金激光表面合金化制备Ti5Si3/Ti耐磨复合材料涂层研究

Wear-Resistant Ti_5Si_3 / Ti Composite Coatings Made by Laser Surface Alloying

2024铝合金涂覆Ni，Fe和Cu激光表面合金化

Laser Surface Alloying of 2024 Aluminum Alloy with Ni , Fe and Cu

羰基金属气相沉积方法进行Al2O3基片表面合金化研究

Study on the Alloy of Al_2O_3 Substrate Surface by Chemical Vapour Deposition ( CVD ) of Carbonyl Metals

激光表面合金化TiC增强复合涂层及性能研究

Investigation on TiC-reinforced composite coating on stainless steel prepared by laser surface alloying

TiAl合金激光表面合金化涂层的组织与耐磨性

Microstructures and wear resistance of laser surface alloyed composite coatings on TiAl alloy

TiAl合金电子束表面合金化层组织和性能研究

Microstructure and Properties of Electron Beam Surface Alloyed Composite Coatings on TiAl Alloy

TiAl金属间化合物合金碳元素脉冲激光表面合金化显微组织及TiC快速凝固生长形态研究

Microstructure and TiC Carbide Growth Morphology of Pulsed Laser Surface Alloyed TiAl Alloy with Carbon

TiAl金属间化合物碳元素激光表面合金化

Laser surface alloying of TiAl intermetallics with carbon

也介绍了改善V法铸件机械性能的方法，如表面合金化，涂料中加入孕育剂等。

Some techniques to improve the mechanical properties of V process castings , such as surface alloying , inoculant addition to the coating are presented .

W（18）Cr4V激光表面合金化表面形貌与耐磨性能的研究

Study on the Surface Morphology and the Wear-resistance of Alloyed W_ ( 18 ) Cr_4V Surface by Laser

2024（LY12）的激光表面合金化

Laser Alloying on the 2024 ( LY12 ) Surface

应用激光技术对铀上铌镀层进行表面合金化处理，并应用能谱和X射线衍射仪对处理层中的铌元素分布和相结构进行了分析。

Laser surface alloying treatment was applied to the Nb-plated depleted uranium and the phase structure and distribution of Nb in the treated surface layer were analyzed by x-ray diffractometer and energy density spectrometry .

45~钢涂敷ZrO2（2.5mol%Y2O3）+Ni激光表面合金化的显微结构研究

Study on Microstructure of laser cladding layer of zro_2 ( 2.5mol % y_2 o_3 ) + Ni on surface of 45 ~ # steel

V-EPC表面合金化在导卫板生产中的应用

Application of V-EPC Surface Alloying on the Guide Plate Production

最后对V-EPC表面合金化过程进行了热力学与动力学分析。

Finally , the analysis of thermodynamics and dynamics were conducted during surface alloying .

V-EPC法铸渗表面合金化研究

Study of Cast - on Surface Alloy in g Process in g with V-EPC

涂层与基体的结合为完全冶金结合，激光表面合金化后TiAl合金硬度及在滑动磨损及磨料磨损条件下耐磨性均大幅度提高。

Both hardness and wear resistance of the γ - TiAl intermetallic alloy under sliding and abrasive wear conditions are considerably improved after laser surface alloying treatment .

采用等离子表面合金化技术对纯钛进行Mo-N共渗。

Mo-N surface modified layer was fabricated on pure titanium substrate with the plasma surface alloying technique .

ZG45铸造表面合金化层的组织与性能分析

Analysis of the Structure and Property Surface Alloying Layer of Casting

用CW-CO2激光实现钛-硼表面合金化的机理

Study on the Mechanism of Surface Alloying of Ti-B by CW-CO2 Laser

利用碳对TiAl金属间化合物合金进行激光表面合金化，制得了以TiC（MC碳化物）为增强相的复合材料涂层，研究了MC碳化物的凝固生长形态及生长机制。

TiC reinforced composite coating was fabricated by laser surface alloying on the substrate of TiAl intermetallics . The growth morphology and mechanism of the TiC carbide under rapid solidification conditions were investigated as a function of laser beam scanning speed .

采用失重法和电化学扫描法研究了等离子表面合金化技术在Ti6Al4V（TC4）合金表面形成的Ti-Nb合金层及基体材料的腐蚀行为，分析了Nb的渗入对Ti6Al4V耐蚀性的影响。

Effects of Nb surface alloying on corrosion behavior of Ti6Al4V ( TC4 ) in H2SO4 、 HCl 、 NaCl solutions were investigated by immersion test and electrochemical technigues respectively .

Ta-Ni和Nb-Ni的熔盐电化学表面合金化及合金性质的研究

Electrochemically surface alloying on Ni with TA and Nb in molten fluorides and properties of ta-ni and Nb-Ni alloys

论述了ZG45铸钢铸渗表面合金化层组织与性能的研究结果，并对其形成机制进行了初步探讨。

An investigation on the microstructure and properties of surface alloyed layer on ZG45 casting steel is presented with a preliminary discussion of the mechanism of the layer formation given .

本实验最优工艺条件下镁合金表面合金化层的自腐蚀电位为-1.0628V，自腐蚀电流下降了两个多数量级。其次，本文对消失模铸造镁合金表面锌及铝锌复合合金化进行了探索。

Under the optimal processing conditions , the corrosion potential of the magnesium alloy was -1.0628V and the corrosion current decreased by more than two orders of magnitude . Secondly , surface zinc-alloying and aluminum-zinc-alloying of lost foam casting magnesium alloy were investigated .

铸造铝合金激光表面合金化的研究

Laser surface alloying of cast aluminium alloy with Ni and Cr

铝活塞激光表面合金化关键技术的研究

Study on Key Technology of Laser Surface Alloying of Al piston