输送带

shū sòng dài
  • conveyor;conveyer belt
输送带输送带
输送带[shū sòng dài]
  1. 标准胶输送带式连续干燥的研究

    Study on continuous drying of standard rubber with conveyor

  2. 备用输出点可以连接其它的自动化设备,如输送带和承接台等。

    Spare output point can be connected to other automation equipment , such as conveyor and receiving station .

  3. 新型梳棉机在落卷时皮板输送带(或皮圈,围裙)运行受阻

    Obstruction in the movement of Aprons during doffing in modern cards .

  4. PLC在输送带自动控制装置中的应用

    Application of PLC to Automatic Control Device with Convey Belt

  5. MCU控制的输送带纵向撕裂检测仪

    Detector Controlled by MCU for the Longitudinal Kip of Steel-cord Belt

  6. PVC整芯阻燃输送带起泡原因浅析

    Talking about the reasons produces vapor bubbles of PVC whole core fire resistant belt

  7. 研究了不同填充剂、增塑剂对PVC轻型输送带覆盖胶性能的影响。

    Effects of different fillers , different plasticizers on the cover properties of light PVC conveyor belts were studied .

  8. 输送带企业CIMS的研制

    Research on CIMS of Conveyor Belt Enterprise

  9. 针对燃料煤输送带运输线,设计了燃料煤运输线的PLC控制系统,分析了控制系统的各个组成部分。

    In this paper , PLC control system of fuel coal transportation network is designed and each part of the control system is analyzed .

  10. 基于Marc的塑料整芯输送带生产线真空塔的设计

    Vacuum tower design of plastic solid woven belt product line based on Marc

  11. 实践证明,通过添加抗静电剂和导电材料,能够生产出抗静电效果良好的PVC阻燃输送带。

    The experiments prove that the PVC conveyer belt with good antistatic capability can be produced by adding antistatic agent and conducting material .

  12. 添加了输送带、储泥箱等辅助设备,系统采用PLC控制,完善了控制系统的设计。

    The conveyor belt , reservoir mud boxes and auxiliary equipment were designed , PLC control system was introduced and the design of control system was completed .

  13. 2.4×8m钢丝绳输送带生产线改造

    Renovation of Production Line for 2.4 × 8 Meter Steel Cord Conveyor

  14. 在X射线线阵探测器消化吸收的基础上,设计了线阵探测器阵列和主机之间的通讯软件,实现了输送带大数据量的实时传输。

    We have designed communication software between X-Ray linear array detectors and host computer that carry out the large scale data and Real-time transmission based on X-Ray linear array detectors .

  15. 输送带的材质有:橡胶、橡塑、PVC、PU等多种材质,机架材质有:碳钢、不锈钢、铝型材。

    Conveyor belt material are : rubber , plastics , PVC , PU and other materials , frame materials are : carbon steel , stainless steel , aluminum .

  16. 基于Algor软件对带式输送机输送带模型的模拟分析

    Based on Algor Program to Rubber Belt Model Imitate Analysis

  17. 用2种橡胶(50/50,质量比)与SFRC2共混可改善加工行为,其胶料可制作V带、胶管、输送带、胶鞋等制品。

    The blends of two rubbers ( 50 / 50 mass ratio ) With SFRC 2 could improve the processibility and the compounds could manufacture V belt . hose , conveying belt and rubber shoe .

  18. 除此之外,以降低成本和提高综合性能为目的,详细分析了PVC矿用整芯输送带的糊体和覆盖胶配方。

    In addition , two recipes of the PVC solid-core flame retardant conveyor belt for coal mine were excellently analyzed aiming to reduce the cost and to improve the product 's compositive performance .

  19. 实验结果表明:从热释放性能、产生的CO、释放的烟雾以及烟雾的影响方面综合分析,尼龙输送带着火以后的危害最大,木材燃烧后的危害最小。

    The experimental result shows that in four ways ( the amount of CO produced , heat released , smog produced and effect of smog ), the danger of nylon conveyer belt is most serious and the danger of the timber is minimum .

  20. 在对基于漏磁产品的总结、评测的基础上,确定了现在的钢丝绳芯输送带X射线透视检测方案,此方案突破了漏磁检测的局限性,实现了皮带内部结构的可视化。

    We worked out the solution of monitoring steel cord belt based on X-Ray non-destructive on the basis of evaluation and summary to MFL-based products . This solution brakes though the limitations of MFL-test and realizes the visual of internal structure of the belt .

  21. GDS-100钢缆输送带托绳轮轴的技术改造

    Improvement of Wirerope Wheel Shaft for GDS-100 Type Wirerope Belt Conveyor

  22. 黏合增进剂PM-18在输送带胶料中的应用

    Applications of adhesion promoting agent PM-18 in the rubber compound for conveyor belt

  23. MB-202在阻燃钢丝绳输送带中的应用

    Application of MB-202 to Flame Retardant Steel Conveyor

  24. 介绍了Devcon(得复康)高效橡胶修补刑及其在输送带维修中的应用效果。

    The paper introduced a kind of high performance rubber repairing putty named Devcon and its applied effect in the repairing of driving belt .

  25. 接着探讨了输送带的静特性和动特性,通过对比分析两种输送带粘弹性模型的特点,确定了应采用Kelvin模型作为输送带的动力学模型。

    Then the static characteristics and dynamic characteristics of the conveyor belt are discussed , it is confirmed that the Kelvin model is used as a dynamics model of the conveyor belt by the comparative analysis of the characteristics of the two kinds of conveyor viscous-elastic model .

  26. 分析850hPa水汽通量矢量场结果表明:广西锋面型暴雨发生时,从孟加拉湾到广西上空有一西南气流的水汽输送带,广西暴雨水汽主要来源于孟加拉湾。

    Analysis of the distribution of the vapor flux vectors at 850 hPa shows that there is a water vapor transmitting belt from the Bengal Bay to Guangxi , and the Bengal Bay is the vapor sources of heavy rainfall over Guangxi .

  27. 结果丹参浸膏真空带式干燥的最佳工艺条件为丹参浸膏含水率40%,丹参浸膏进料速率1.5mL/s,输送带速率5cm/min。

    Results The optimum process determined by the grading method was listed as follows : water content of the extract before drying was 40 % , the feeding speed was 1.5 mL / s , the belt speed was 5 cm / min.

  28. 通过分析输送带的粘弹性特点,选择了Vogit模型作为输送带的单元模型,采用基于离散模型的有限元方法,建立了离散模型的动力学方程。

    By analyzing the viscoelastic characteristics of the belt , Vogit model is selected as the unit model of the belt , and in discrete model based on the finite element method , a dynamic equation of the discrete model has been established .

  29. 矿用尼龙或聚酯分层输送带的织物粘合研究

    Study on Fabric Adhesion of Nylon or Polyester Ply Conveyor Belt

  30. 德国凤凰公司钢芯输送带在德兴铜矿的运用

    Application of steel-cored conveyer belt made by Phoenix company in German