透射电子显微镜
- 名transmission electron microscope

-
利用JEM2002透射电子显微镜(TEM)及其主要附件X射线能量散射谱仪(EDXA),对半绝缘砷化镓(SIGaAs)单晶中微缺陷进行了研究。
Microdefects in SI-GaAs single crystal were researched via transmission electron microscope ( TEM ) and energy dispersion X-ray analysis ( EDXA ) .
-
采用动态光散射仪与微电泳仪测定纳米粒的粒径与表面电位;透射电子显微镜(TEM)观察纳米粒表面形态;差示扫描量热仪(DSC)分析纳米粒中鱼藤酮的物理状态。
Diameter and surface potential of nanoparticles was determined by dynamic light scattering meter and micro-electrophoresis meter . The configuration of sample was observed by transmission electron microscope ( TEM ) . With differential scanning calorimetry ( DSC ) the physical state of rotenone in nanoparticles was analyzed .
-
用X射线衍射分析,透射电子显微镜对纳米铁粉的性能进行了表征。
The properties were characterized by X-ray diffraction analysis , TEM .
-
透射电子显微镜(TEM)在孢粉学研究中的应用
Application of transmission electron microscope ( TEM ) in palynological study
-
通过X射线衍射、透射电子显微镜、场发射扫描电子显微镜、能量色散谱以及氮吸附-脱附等温线对纳米微粒进行表征。
This novel nanostructure was characterized by XRD , TEM , FESEM , EDS and nitrogen adsorption-desorption isotherms .
-
用透射电子显微镜(TEM)分析了所制备的样品。
The samples have been analyzed with transmis-sion electron microscope ( TEM ) .
-
借助透射电子显微镜发现:橡胶粒子在SAN基体中分散均匀,达到共混分散的目的。
Scanning electron microscope results experienced that PBA rubber particle uniformly disperse in SAN matrix .
-
利用透射电子显微镜(TEM)分析了合金的再结晶晶粒、位错和亚晶组织演变规律。
Transmission electron microscope was used to analyze recrystallized grain 、 dislocation and sub-grain .
-
利用透射电子显微镜(TEM)对Pd-Ag-Si合金膜的亚稳相进行了研究。
The metastable phases of the annealed Pd-Ag-Si alloy film were studied by means of TEM .
-
本文报道了利用透射电子显微镜和Raman谱两种方法对a-Si:H激光结晶过程的研究。
The laser crystallization of a-Si : H was analyzed by using TEM and Raman spectra .
-
透射电子显微镜(TEM)和X射线光电子谱(XPS)分析表明所得的碳纳米管是氮掺杂的。
X-ray photoelectron spectroscopy ( XPS ) and TEM studies revealed that the CNTs were nitrogen-doped .
-
活性炭的结构性质由热重分析,X射线衍射,氮气吸附/脱附等温线和透射电子显微镜等表征。
Activated carbons are characterized by thermal gravimetric analysis , X-ray diffraction , nitrogen adsorption / desorption isotherms and transmission electron microscope .
-
采用pH、电导率在线跟踪和透射电子显微镜等手段考察了表面活性剂对碳化反应的影响和对碳酸钙结晶过程的影响。
The whole reaction process and crystallization process were tracked by on-line detection of pH value and electric conductivity of the reaction mixture .
-
用透射电子显微镜和X射线衍射方法研究Si衬底上的Co薄膜氧化.发现:在550℃以下,薄膜氧化产物是CoO;
The oxidation of Co film on Si substrate during heat treatment was studied by TEM and XRD .
-
采用电弧法制备了C(60)/C(70),并用光学显微镜、扫描电子显微镜和透射电子显微镜对其结晶形貌进行了研究。
The C60 / C70 , sample was prepared by carbon electric arc method , and its crystal morphology was studied by optical microscopy , SEM and TEM .
-
用IR、NMR、DSC和透射电子显微镜等方法对聚合物进行了表征。
The structures of polymers were characterized with IR , NMR , DSC and transmission electron microscope , etc.
-
采用X射线衍射、透射电子显微镜、高分辨透射电子显微镜和X射线能量散射谱对样品进行了表征。
The products were characterized by X-ray diffraction , transmission electron microscope , high-resolution transmission electron microscope and energy dispersive X-ray spectroscope , respectively .
-
X射线衍射和透射电子显微镜实验不但证实它的非晶性,而且给出它的平均颗粒度大小和晶化产物。
X-ray diffraction and transmission electron microscope experiments indicate the powder sample is amorphous and also show the average particle size and crystallization products .
-
使用透射电子显微镜(TEM)、X射线粉末衍射(XRD)和紫外-可见吸收光谱(UV-Vis)对样品的结构和组成进行了表征。
The structure and composition were investigated with UV-Vis absorption spectra , X-ray diffraction , and transmission electron microscopy .
-
用示差扫描量热法(DSC)、电阻测量和透射电子显微镜对Cu-Zn-Al-Mn合金高温时效的贝氏体相变进行了研究。
The bainitic transformation in Cu-Zn-Al-Mn alloys has been investigated by means of DSC , electrical resistance measurement and electron microscope .
-
Hg(1-x)CdxTe多层薄膜材料结构缺陷的透射电子显微镜测定
Determination of Structure Defects in Hg 1-x Cd xTe Multilayer by TEM
-
用红外光谱(IR)、X射线衍射和透射电子显微镜对中间产物凝胶和燃烧后的粉末进行了分析。
By means of the infrared spectrum ( IR ), XRD and TEM , the intermediate product gel and synthesized powders were analyzed .
-
通过X射线粉末衍射(XRD)、Raman光谱和透射电子显微镜(TEM)对产物进行了表征。
X-ray diffraction ( XRD ), Raman spectra and transmission electron microscopy ( TEM ) were used to characterize the products .
-
本文用X射线衍射仪和透射电子显微镜研究了Cu基体离子镀Al膜的相结构及晶体学位向关系。
An X-ray diffractometer and a transmission were used to study the microstructures and the crystallographic relationships of Al film ion plated on Cu .
-
3K2O·22Nb2O5晶体的透射电子显微镜研究
Transmission electron microscopy study of 3k_2o · 22nb_2o_5 crystal
-
并采用X射线衍射,扫描电镜/透射电子显微镜,热重,差热和N2吸附技术对合成材料进行了系统表征。
The synthesized materials are systematically characterized by XRD , SEM / TEM , TG-DTA and N2 adsorption techniques .
-
透射电子显微镜下观察各组在位子宫内膜(Endometrium,EM)、EOS超微病理学特征。
Ultrastructural change in EM and EOS of each group were observed by electron microscopy .
-
分别利用透射电子显微镜和X射线衍射仪表征了Pt/CNT异质结构的形貌及成分。
The morphology , composition of the as-obtained Pt / CNTs hybrids are characterized by transmission electron microscopy ( TEM ), X-ray diffraction ( XRD ) .
-
通过粉末X射线衍射谱,X射线光电子能谱,透射电子显微镜和X射线能量色散谱等分析方法表征了所合成CaV4O9纳米晶的结构和组成。
The sample has been characterized by means of X-ray powder diffraction , transmission electron microscopy , X-ray photoelectron spectra and X-ray energy dispersive spectroscopy techniques .
-
采用共沉淀法合成了纳米羟基磷灰石/聚乳酸复合材料,通过X-射线衍射仪(XRD)、傅里叶红外吸收光谱(FTIR)、透射电子显微镜(TEM)以及光电子能谱(XPS)对材料进行了表征。
Hydroxyapatite / PDLLA composite was synthesized with co-precipitation method and characterized with XRD , FTIR , TEM and XPS .