金属基复合材料

金属基复合材料压坑损伤的无损评价

Nondestructive evaluation of indentation damage for MMC Composites

细观力学实验技术在金属基复合材料研究中的应用

Application of Experiment Micromechanics to MMC S Research

应变率对Cf/Al金属基复合材料力学性能的影响

Effect of Strain Rate on Mechanical Behavior of C_f / Al Composites

高磁导率下FexCo（1-x）金属基复合材料的制备

Fabrication of Fe_xCo_ ( 1-x ) metal matrix composites with high permeability

SiCP含量及缓蚀剂对SiCP/Al金属基复合材料腐蚀行为的影响

Influence of SiC_P content and inhibitor on the corrosion behavior of SiC_P / Al metal matrix composites

CVD碳化硅纤维及其金属基复合材料进展概况

The development of CVD SiC fibers and its metal matrix composites

网状结构Si3N4陶瓷增强金属基复合材料的研究

Study of metal matrix composites reinforced by Si_3N_4 network structure

选择适当的激光辐照工艺参数，获得致密的TiN增强金属基复合材料激光改性层。

A compact laser modified surface coating reinforced with fine TiN can be achieved with optimum process parameters .

近年来随着C纤维生产成本的降低和性能的不断提高，C纤维作为金属基复合材料的增强相越来越受到人们的重视。

With the recent development in reducing cost and improving properties , carbon fiber has attracted more and more attention for using as reinforcement in metal matrix composites .

铝合金表面激光熔覆原位自生TiC增强金属基复合材料涂层

An In-situ Formed TiC Particle Reinforcement Composite Coating Induced by Laser Cladding on Aluminium Alloy

PCD刀具超声振动切削金属基复合材料SiCp/Al的特性研究

Research on ultrasonic cutting performance of metallic matrix composites SiC_p / Al with PCD tool

对雾化喷射成型法制备的SiCp／2014颗粒增强金属基复合材料的显微组织进行了分析。

An analysis is made of microscopic structure of the metal matrix composit reinforced with SiC P / 2014 particulates formed by the spray forming .

金属基复合材料（MMC）的理化行为和工程性

Physics and chemistry properties , engineering of metal-based Composites

从细观力学观点出发，利用胞元法对颗粒增强金属基复合材料SiCp/Al的阻尼特性进行了数值模拟，研究了应变振幅对室温下SiCp/Al复合材料的阻尼性能的影响。

The dependence of the damping capacity of SiC_p / Al composite at room temperature on strain amplitude has been simulated by employing cell method .

以Ti作为合金化元素对SiCp6061Al金属基复合材料（SiCp6061AlMMC）进行焊缝原位合金化激光焊接。

In situ weld alloying / laser beam welding is utilized to join SiCp / 6061Al MMC with titanium as alloying element .

SiCp因其高强度、高模量、耐热、耐磨、耐高温等性能而被作为颗粒增强体制备金属基复合材料。

Because of its excellent properties , such as high strength , high module , wear resisting , etc , SiC p is added to metal-matrix composite as a reinforce particle .

XD工艺&金属基复合材料制备新技术

XD Synthesis-New Technology for Fabrication of Metal Matrix Composite

用挤压铸造法制备了三维网络SiC/Cu金属基复合材料，研究了铸造压力、网络SiC骨架预热温度、浇注温度等工艺条件对复合材料凝固显微组织的影响。

3D-meshy SiC / Cu metal matrix composite was fabricated by squeeze casting process . The influence of process conditions on solidification microstructure of the composites was studied .

本文利用有限元模拟和试验分别对颗粒增强型金属基复合材料SiCp/Al在不同因素影响下的动态力学性能进行了研究。

The mechanical responses of the PMMCs SiC_p / AI under the effect of different factors have been studied in this article using the finite element method and experimental test .

金属基复合材料过渡液相（TLP）扩散焊中间层设计的改进

Modification of Design for Interlayer in Transient Liquid Phase ( TLP ) Bonding of Metal Matrix Composites

本文通过仿真软件MATLAB建立了复合材料颗粒随机分布三维单胞模型，并将均匀化理论与有限元方法相结合，预测了金属基复合材料的宏观性能。

Firstly , the random distributed model of particle with MATLAB is built , then the macroscopic properties of metal matrix composites are predicted by the homogenization method was combined with finite element method .

研究运用XDTM法制备金属基复合材料工艺，成功地制备了Al2O3（P）／Al复合材料。

The XD TM technology for metallic composites is researched , and the Al 2O 3 ( p ) / Al composites have been successfully formed .

证实了ECI在室温下快速制备纤维增强金属基复合材料的可行性。

The ECI is feasible to prepare rapidly fiber-reinforced metal matrix composites at room temperature .

制约金属基复合材料（MMCs）扩大应用的主要因素是成本过高。

The reason which restricts the extending application of metal matrix composites ( MMCs ) is its higher costs .

介绍了金属基复合材料（MMC）的加工发展状态，包括各种传统的切削加工方法和特种加工方法在金属基复合材料上的应用。

It introduces the development about the machining of metal matrix composites , that includes the applications of various conventional cutting processes and special machining processes .

反应烧结是合成颗粒增强金属基复合材料（MMCs）的新工艺。

Reactive sintering has emerged as a new and promising technique for synthesizing particulate reinforced metal matrix composites ( MMCs ) .

利用电化学方法评价了铝金属基复合材料Al6061/SiCp表面稀土转化膜的抗腐蚀性能，膜的存在使腐蚀过程中的阴极反应和阳极反应同时减弱，腐蚀速率降低。

The corrosion resistance behavior of rare earth metal ( REM ) conversion coating on aluminum based metal matrix composites ( MMC ) Al6061 / SiC P was examined by electrochemical method . Both anodic and cathodic reactions of corrosion were reduced by the existing film .

随着SiC颗粒的体积分数的增加，复合材料流动应力相应增加，并将实验结果与理论计算结果进行了比较分析，得到反映颗粒增强金属基复合材料性能的本构方程。

With the increase of volume fraction of SiC particles , the flow stress of composites increases . From the compare of the experiment result and the analysis result , the constitute equation of MMCs is given .

对型内悬浮法制取金属基复合材料方法作了介绍，并用该法成功地制取TiC／钢基复合材料。

A kind of new technology to manufacture particles / metal composite material by the suspend technology in mold is introduced , by which TiC / steel composite material has successfully been manufactured .

利用纵向各向异性有限元模型对双剪切试样的蠕变响应进行了有限元分析，其目的是为了研究双剪切试样用于短纤维金属基复合材料（MMC）蠕变响应研究的可行性。

Double shear creep specimens were investigated by the transverse anisotropic finite element method , in order to study the multiaxial creep behavior of short fiber-reinforced metal matrix composites ( MMCs ) .