配方设计

CAR系统完全适合辅助橡胶、塑料和胶粘剂等的配方设计和试验。

CAR system is an aid suitable for the formula design and experiment of rubber , plastics and adhesive .

某硬质PVC绝缘套管的配方设计

On the Formulation Design of a Hard Quality PVC Insulating casing

研究RPA2000橡胶加工分析仪在配方设计中的应用。

The application of RPA2000 rubber processibility analyzer in formulation was investigated .

光-生物降解PE塑料配方设计和评价研究

The formula design and evaluation of photo-biodegradable PE plastics

防雾抗静电PVC功能膜配方设计

The Prescription Design of Antifog and Antistatic PVC Function Film

PET金银镀铝膜专用烘烤漆的配方设计

Formulation Design of Special Baking Paint for Aluminum Plated PET Membrane of Metallic Yarn

GEL的配方设计方法

Producing and design way of GEL

PVC用钙/锌复合稀土液体热稳定剂的配方设计

Formulas Design Of Green Liquid Calcium-Zinc / Rare Earth Compound Heat Stabilizer For PVC

耐醇ABS银粉漆的配方设计及施工工艺探讨

Discussion on Formulation Design and Application Process of Alcohol-Resistant ABS Aluminum Paint

电脑算法语言在PU软泡配方设计中的应用

Application of Algorithmic Language in the Design for Flexible PUF Formulations

高PVC乳胶涂料配方设计

Compositions Design of High PVC Latex Coatings

探讨了采用过氧化物硫化的EPDM发泡材料的配方设计和工艺。

The formulation and processing technology of peroxide vulcanized EPDM foam were investigated .

复合材料在直升机上的应用概况ACM橡胶的配方设计及其加工工艺

APPLICATIONS OF ACM IN HELICOPTER Formulation and Process of ACM Compound

挤出PVC-U门窗异型材配方设计

Formulation technology of PVC-U Profile for door and window by extrusion

用于辐照改性的PBO纤维复合材料的树脂体系配方设计及其性能研究

Design of epoxy resin matrix used for modified PBO fiber composites and study of properties

介绍了金刚石钻头设计专家系统中的配方设计子系统（BPFES），包括多层感知机数学模型和BP算法，专家子系统的设计，钻头配方参数样本的网络训练；

The bit prescription subsystem including multiple perceptron mathematics model and BP algorithm , expert designing subsystem and exercise of network of bit prescription parameter samples is emphasized on .

粉煤灰水泥浆体系MTC配方设计及实验

Ingredient design and field test on the MTC of coal ash and cement systems

ACM橡胶的配方设计及其加工工艺

Formulation and Process of ACM Compound

动态硫化EPDM/PPTPV的配方设计

Dynamic vulcanized EPDM / PP TPV formula design

介绍了PVC卷帘门窗型材的配方设计要点、产品性能、生产工艺流程、重点工艺参数控制和挤出成型设备的性能特点。

The formula design , product performance , production technological flow , and key process control parameters of PVC rolled window profile , and the performance of the extrusion equipment were introduced .

详细论述了一种新型改性SBS溶剂型胶粘剂的配方设计、制备工艺、基本性能等有关问题。

In this paper , the problems related to-for mutation design , preparation technology and general properties of a new modified SBS solvent-based adhesive are discussed in detail .

从配方设计、高速挤出设备、模具、捏和工艺及挤出温度控制五个方面阐述了PVCU异型材高速挤出的生产技术。

High speed extrusion process for PVC U profiles is described from the following 5 aspects : formulation , high speed extrusion equipment , die , kneading technology and control of extrusion temperature .

介绍了一种用于彩电机壳涂装的紫外光固化涂料，重点阐述了彩电UV涂料的配方设计思路和关键性能，并讨论了影响UV涂料性能的各个因素。

A kind of UV curable paint on TV plastic shells is introduced . The formulation design and the key performances thereof are focused . The factors influencing the performances of the UV curable coatings are discussed .

为了制造可实用的低游离TDI预聚物，应当是配方设计的相对宽松与工艺条件的相对严苛相结合。

For the sake of manufacturing practical prepolymer with low TDI , the reaction conditions must be in combination of relatively relaxed formulation design with comparatively strict process conditions .

讨论了无纺布基湿式PU合成革的配方设计原则及其工艺过程，介绍了生产中易出现的问题及解决办法。

This paper has discussed the formula designing of PU synthetic lether coated nonwoven fabric by wet method and its manufacturing technology , the problems and their treatment methods in processing have been introduced too .

讨论了多种因素影响的模糊条件下如何获得成本最低的陶瓷配方设计方案，并介绍了用Matlab数学软件求模糊最优化问题的最优解。

The plan how to obtain the ceramic formula design with the lowest cost under the fuzzy condition affected by various factors is discussed in the paper . Matlab mathematics software is introduced for the optimum solution of the fuzzy optimization problem .

将活性嗜酸乳杆菌、双歧杆菌冻干菌粉按工艺要求添加到原料中制得益生菌AB咀嚼奶片，并对该奶片的配方设计、工艺流程、工艺要点及产品易出现的质量问题做了研究。

Milk slice of probiotic AB was developed by adding freeze-dried powder of Lactobacillus acidophilus and Bifidobacterium , and the formula design , processing technology , key processing and product quality problems easily occurring were studied .

介绍了以纸基三聚氰胺甲醛（MF）塑料为面层、废旧聚乙烯（PE）塑料为芯层，用层压工艺制造复合板材的工艺过程，并重点论述了阻燃型板材的配方设计及工艺控制。

A laminating process for melamine formaldehyde / polyethylene ( MF / PE ) composite plates with MF as skins and waste PE as cores is introduced . Formulation and process control for flame retardant plate are described .

受试者从开始就接受SQV配方设计改变或由CART转为SQV-RTV-ATV，同时加强药物代谢动力学采样。

Patients underwent an initial SQV formulation change or a CART change to SQV-RTV-ATV with intense pharmacokinetic sampling .

针对提高聚合温度，降低聚合度，同时使PVC孔隙率降低的矛盾，本文根据PVC树脂的成粒机理，进行了疏松少皮低聚合度PVC树脂的合成配方设计。

Aiming at decreasing polymerization degree as well as increasing porosity and basing on the well-known particle formation mechanism of vinyl chloride suspension polymerization , synthesis recipe of PVC resin with low polymerization degree , high porosity and less skin was designed .