锡合金

锡合金镀层工艺的研究现状及展望

Study status and prospect of tin alloys depositing process

铝锡合金电磁搅拌器的优化分析

Simulation and Optimization of the Stirring Heater of Aluminum Tin Alloys

铜锡合金基体中加入少量Ni能提高材料的摩擦因数和耐磨性能。

Modicum Ni can increase friction coefficients and wear property of copper based brake materials .

表面活性剂（PVA）浓度对电子束辐照制备纳米铜锡合金的影响

Effects of surfactant ( PVA ) concentration on preparing Cu / Sn alloy nanoparticles by E-beam irradiation

研究了用铟锡合金靶直流磁控反应溅射制备ITO透明号电膜。

ITO transparent conducting films deposited by DC magnetron reactive sputtering from In-Sn alloy target were Studied .

然后利用有限元分析手段，研究了高功率LED器件正常点亮和高温回流条件下，金锡合金焊层上的热应力分布变化。

Furthermore , FEA is used to research the variety of thermal stress on the gold-tin eutectic solder layer between the normal power dissipation and the high temperature reflow process .

运用热重-差热分析法（TG-DTA）具体对低熔点锡合金及贵金属添加成份钎料的熔融-氧化过程进行了定量测定和分析。

In practice , TG-DTA technique was used to determine the change of sample 's weight in the melting-oxidation process .

采用富氧火焰（AirC2H2O2）原子吸收光谱法直接测定铅钙锡合金中01%以上的锡。

The element tin more than 0 1 percent proportion in the Pb-Ca-Sn alloy can be directly determined by use of Air-C 2H 2-O 2 flame atomic-absorption spectrometry method .

用SiH4和SnCl4作源，用GD工艺制备了无定形硅锡合金。

A new type of amorphous silicon-tin alloy has been deposited by GD technique , usingSiH_4 and SnCl_4 mixture .

采用铟锡合金靶（铟锡，90-10），通过直流反应磁控溅射在玻璃基片上制备出ITO薄膜，并在大气环境下高温退火处理。

Tin doped indium oxide ( ITO ) films were deposited on glass substrates by reactive magnetron sputtering using a metallic alloy target ( In Sn , 90 10 ) .

D-KH法制备金锡合金的组织与结构

Structure Analysis of Gold-tin Alloy Prepared by D-KH Method

为了解决焦磷酸盐镀铜锡合金镀液的稳定性问题，对KNO3在镀液中的作用机理进了探讨。

Cyclic voltammetry was used to investigate the action mechanism of KNO_3 in the electroplating of Cu-Sn alloy coating from a pyrophosphate bath , which was aiming at increasing the stability of the plating bath .

几年后小金人的原料被换成不列颠合金，这是一种类锡合金，然后镀上铜、镍银，最后再镀上一层24K黄金。

Within a few years the bronze was abandoned in favour of Britannia metal , a pewter-like alloy which is then plated in copper , nickel silver , and finally , 24-carat gold . 9 .

铝锡合金液电磁搅拌的流场模拟分析

Simulation of Flowing Field on the Magnetic Stirring of Aluminum-tin Alloys

光亮铜锡合金／镍／铬组合镀层的耐蚀性

Corrosion Resistance of Bright Cu-Sn / Ni / Cr Coating Combination

铜锡合金热弹马氏体金相形貌研究

Investigation of Metallographic Figures of the Thermoelastic Martensite in Cu-Sn Alloys

低弹性模量钛铌锆锡合金铸件表面反应层结构的研究

A surface reacted layer study of Ti-Nb-Zr-Sn alloy after dental casting

钢铁浸镀铜锡合金工艺研究

Immersion plating of copper - tin alloy on steel and iron

金-锡合金电镀及其在微波器件上的应用

Electroplating of Gold-Tin Alloy and Its Applications in Microwave Devices

铜锡合金电镀液中铜、锡含量的测定

Continuous determination of copper and tin content in Cu-Sn alloy electroplating bath

选择性吸收黑色镍-锡合金镀层的研究

Study on Black Ni-Sn Alloy Coating of Solar Selective Absorptance

铅-锡合金电镀液中铅、锡的连续测定

Continuous Determination of Lead and Tin in Electroplating Solution of Lead-tin Alloy

焦磷酸盐电镀铜锡合金电极过程

On Electrode process of Electroplating Cu-Su Alloy with Pyrophosphate-Stannate

原子吸收法测定铅锑锡合金中的铜

Measuring copper from lead-antimony-tin alloy by atomic absorption method

铜锡合金代镍电镀工艺的研究进展

Progress in Plating Cu - Sn Alloy as a Substitute for Nickel Coating

高速电气化铁路接触网线用铜锡合金线坯生产实践

Trail of Making Cu-Sn Alloy Rod for High-Speed Rail Wire from SCR System

锆锡合金由于中子辐照而引起生长。

Zircaloy growth could be induced due to irradiation .

甲基磺酸盐电镀锡及锡合金的研究进展

Research Progress on Methylsulfonate Tin and Tin Alloy Plating

二元锡合金心电电极模拟除颤恢复性能的研究

A study on simulated defibrillation recovery of ECG electrodes

铅锑锡合金铸件精密成形技术研究

Research on the Technology of Pb-Sb-Sn Alloy Exact Molding