镀锌层

  • 网络Zine;zinc;zinc coat;zinc plating layer
镀锌层镀锌层
  1. GB/T1839-1993钢铁产品镀锌层质量试验方法

    Steel product & Zinc coating mass testing method

  2. 化学溶解法是检验钢板镀锌层质量的一个主要手段。

    The chemical solution method is a main tool to testing the quality of zinc coating .

  3. 镀锌层对钢板r值的影响

    Effect of Galvanized Coating on r - Value of Sheets

  4. Ti对提高可锻铸铁热镀锌层耐蚀性能的作用

    The Effect of Ti on Improving the Corrosion Resistance of Hot Dip Galvanizing Zinc Coating on Malleable Cast Iron

  5. 钢丝热镀锌层热熔涂LLDPE防腐蚀

    Coating LLDPE by Heat Melting on Galvanized Steel Wire by Dipping to Resist Corrosion

  6. 镀锌层破损汽车钢板在含NaCl溶液和泥浆中的腐蚀行为与EIS研究

    Corrosion properties of galvanized auto steel sheet with breakages of zinc coating in NaCl containing solution and mud

  7. 而镀层中的含Fe量又直接影响镀层的耐蚀性。含Fe0.4%~0.8%的锌铁合金镀层其耐蚀性大大优于普通镀锌层。

    Corrosion test show that the corrosion resistance of Zn-Fe alloy deposit with 0.4 % ~ 0.8 % Fe is superior to that of Zinc coating .

  8. 采用电化学方法、扫描电镜和X射线光电子能谱研究了锌酸盐镀锌层的三价铬钝化膜的电化学性能、表面结构与成膜机理。

    The electrochemistry behavior , surface microstructure and forming process of trivalent chromium passivation film were studied by electrochemical methods , scanning electron microscopy and X-ray photoelectron spectroscopy .

  9. 用SEM、EDX、XRD、XPS等技术分析了电镀锌层表面黑变膜的组成和结构。

    The composition and structure of black tarnished film on zinc plated surface were investigated by means of SEM , EDX , XRD and XPS .

  10. 选择Ti作为合金元素加入镀层,以提高可锻铸铁热镀锌层的耐蚀性能。试验发现。

    In this paper , Ti is selected as an alloy element to be added into the hot dip galvanizing zinc coating on malleable castiron to improve its corrosion resistance .

  11. Ti对Fe-Zn合金层生长动力学的影响及镀锌层抗粉化性能的有限元模拟

    Influence of Ti on the Growth Kinetics of Fe-Zn Intermetallic Layer and the Finite Element Simulation on Chalking-resistance of the Galvannealing Coating

  12. 结果表明,含Fe质量百分比为0.4%~0.8%的Zn-Fe合金镀层的耐蚀性至少是普通镀锌层的2倍。

    Neutral salt spray test shows that the corrosion resistance of Zn Fe alloy deposition containing 0.4 ~ 0.8wt % Fe is as tow times as that of Zinc coating at least .

  13. 根据EDX,XPS和XRD分析结果,阐述镀锌层在含磷酸低浓度铅酸溶液中钝化成膜过程和成膜反应。

    According to the analysis of EDX , XPS and XRD , the formation processing and reaction of passivated films on the sauce of electrogalvanizing coating in a low chromate solution containing orthophosphoric acid were investigated .

  14. 电化学研究表明:当电极电势比-1.8V(vsSCE)更负时,能造成H+和Zn2+浓差极化,得到锌粉而非镀锌层。

    The results of electrochemical studies indicate that the concentration polarization of Zn2 + and H + is great enough to obtain zinc powder instead of plate when the potential is more negative than-1.8V ( vs SCE ) .

  15. 探讨了锌淬时镀锌层组织形成的过程,结果表明:在锌淬过程中依次形成Fe-Al相、δ1相、ζ相和η相。

    In this paper the layer formation in the zine-quenching process is discussed . the results show that the Fe-Al phase 、δ _1phase 、ζ phase and η phase form in turn .

  16. 采用SEM观察了初始锌粉和机械镀锌层的断口形貌,分析了镀层断口锌粉颗粒结合处的成分分布及双金属冷焊结合机理,探讨了镀层中锌粉颗粒间的结合机制。

    The primary zinc powder and the coating fracture was observed with scanning electron microscopy ( SEM ), composition distribution of zinc powder at coating fracture and bimetal cold welding mechanism were analyzed , and bonding mechanism of zinc particles in coating was ( discussed . )

  17. 结果表明:机械镀Zn-Al复合镀层是一种综合性能优良的防护镀层,比机械镀锌层外观更为均匀光滑,无贯穿性孔隙,抗冲击破坏能力和耐腐蚀性均优于机械镀锌层。

    Mechanical Zn-Al plating was a kind of protection film with fine integral performance , smoother than mechanical galvanizing layer , without porosity , with high impact resistance and it 's corrosion resistance was better than that of galvanizing layer .

  18. 介绍GB/T34394《一般用途低碳钢丝》和GB/T1539394《钢丝镀锌层》两个新国标的制修订情况,并对标准中主要技术要求进行了评述。

    O introduce drafting and revising of two new national standards for GB / T343 - 94 ( tow Carbon Steel Wire in General Use ) and GB / T15393 - 94 ( Steel Wire Galvanizing Coatings ) . Main technical requirements are reviewed in the standards .

  19. 镀锌层中Cr~(6+)的测定

    Determination of Cr ~ ( + 6 ) in Galvanized Coat

  20. 镀锌层三价铬蓝白色钝化工艺的研究

    Study of Trivalent Chromium Bright Blue Passivation Process for Zinc Coating

  21. 钢铁镀锌层纳米陶瓷转化膜的制备及性能

    The Preparation and performance of Galvanized steel 's Nano-ceramic into membrane

  22. 铅与光照对镀锌层黑变的影响

    Effects of lead and illumination on black patina of zinc plating

  23. 镀锌层无铬钝化研究进展

    Advances in Research on Unchromium Passivation of Galvanized Zinc Layer

  24. 钢丝的镀锌层厚度与防腐性能

    Zn - coat Thickness and Anticorrosion Property of Steel Wire

  25. 钢板表面镀锌层结构与应变关系研究

    Interaction Between Strains and Zinc Deposit Structure of Steel Sheet

  26. 电镀工艺对镀锌层耐蚀性的影响

    Effect of Electroplating Condition on Corrosion Resistance of Zinc Plating

  27. 88系列添加剂对高速镀锌层质量的影响

    Effects of 88 Series Additives on the Quality of High-Speed Galvanization Coatings

  28. 机械镀锌层锌粉颗粒间结合机理的探讨

    Bonding Mechanism of Zn Powder in Mechanically Deposited Zn Coating

  29. 镀锌层钼酸盐转化膜及其耐蚀机理

    Molybdate Conversion Coatings on Zinc Plate and Its Mechanism of Corrosion Resistance

  30. 脉冲电流对锌酸盐镀锌层的影响

    Effects of Pulse Current on the Zinc Coating Formed in Zincate Bath