镀锡

H2O2-铁炭法预处理冷轧带钢厂镀锡废水

Pre-Treatment of Tin-Plating Wastewater From Cold Strip Mill With H_2O_2-Ferric / Carbon

NSR-8405稳定剂能大大地延长酸性光亮镀锡电解液的寿命，并且镀层的可焊性也有所提高。

The NSR-8405 stabilizer can greatly extend the life of bright acid tin-plating electrolyte and improve the solderability of plating as well .

PC在电解镀锡生产工艺上的应用

The application of PC into tin PLA tin g process

镀锡钢板铬酸盐钝化膜中铬的X射线光电子能谱分析

X-ray photoelectron spectroscopy analysis of chromium element in chromate passivation film formed on tinplate

西门子PLC在电镀锡机组中的应用

Application of PLC in Electrolytic Tinning Line

光亮表面镀锡板及DI材的表面粗糙度试验研究

Trail Investigation on Surface Roughness of Bright Surface and DI Tinplate

SS系列酸性光亮镀锡添加剂的研究

A Study of SS Series Additives for Acidic Bright Tin Plating

PCB上化学镀锡工艺的研究

The Research of Electroless Tin Plating on PCB

碘量法测定酸性镀锡液中Sn（Ⅱ）含量的影响因素

Factors Affecting lodine Titrimetric Analysis of Sn (ⅱ) in Acid Tin Plating Bath

PCB的化学镀锡应用技术

Application Technique of Electroless Tin in PCB

镀锡马口铁表面污染的XPS分析

Analysis of tinplate surface contamination using XPS

不同表面状态镀锡钢板铬酸盐钝化膜中铬元素的XPS分析

XPS Analysis of Chromium Element in Chromate Passivation Film Formed on Tinplate in Different Surface State

PSA镀锡液中Sn（Ⅳ）含量对镀层耐蚀性的影响

Effect of Sn (ⅳ) on Corrosion Resistance of Tin Coatings in PSA Tin Plating Bath

镀锡板ATC值与合金层之间的关系

Relationship Between Tinplate ATC Value and Sn Fe Alloy Layer

罩式炉退火T4级上限硬度镀锡原板生产工艺优化

Technical optimization for T4 upper limit hardness tinplate

铜-康铜热电偶的热镀锡膜工艺和测温特性分析稳压特性-对NTC热敏电阻器

Hot Tinning Process of Copper-constantan Thermocouples and Thermometric Characteristics Analysis

镀锡板基板结晶取向与合金层形貌及ATC值的关系

Relationship among morphology , ATC value of alloy coat and crystal orientation of base plate of tinplate

介绍用铅盐反滴EDTA滴定法测定镀锡钢带的镀锡量。

To introduce the determination of Sn coat on Sn plated steel strip using EDTA titration with lead salt back dropping .

采用扫描电镜（SEM）观察了锡层以及软熔后镀锡板合金层的形貌，测试了镀锡板合金层的ATC值。

The morphology of the tin coating and Sn-Fe alloy layer is observed under SEM , and the ATC value of the alloy layer is measured .

MLCC三层镀中甲基磺酸镀锡体系工艺条件对锡镀层性能影响的研究

Study on Effect of Processing Conditions on Tin Coating Performance in MLCC Three-Layer Plating

试样表面镀锡使ADI的抗拉强度和伸长率下降，镀锡层不能有效防止ADI的水脆化。

Soldering on ADI surface decreased the ADI tensile strength and elongation , and solder coating could not prevent from water embrittlement .

为了在实际应用中控制甲基磺酸电镀锡镀层的织构以提高镀层性能，采用X射线衍射分析方法研究了镀锡工艺中表面活性剂浓度、电流密度和镀层厚度对镀锡层织构的影响规律。

In order to control the texture of tin deposits and improve their properties , the effects of surfactant concentration , current density and deposit thickness on the texture of tin deposits were investigated by X-ray diffraction .

冷轧厂电镀锡生产过程中产生的废水含有大量的有机物，COD浓度高，pH值在1.1-2.0之间，很难直接进行生化处理。

There is a plenty of organic matters in wastewater from tin electroplating process of cold rolling mill . The concentration of COD is high and pH is between 1.1-2.0.So it is difficult to treat directly by biochemical process .

利用现代分析测试手段分别研究了TIG焊直接焊接镁铝和镀锡焊接镁铝的焊缝熔合区形貌，并对其进行了元素扩散行为的分析及比较。

Modern analytical methods have been used to investigate the patterns of fusion zone and the diffusion behaviors of elements by TIG direct welding and TIG with Sn as transition layer welding .

相对能量分布谱得到的沉积过程中的生长能量与X射线衍射测得的镀锡板的晶粒尺寸具有随恒电流变化相同的变化趋势。其次，论文研究了镀锡板的软熔工艺与性能。

The variation trend of the growth energy obtained from the relative energy distribution plot is the same as the tin crystal size from XRD with variation of deposition current density . Secondly , the paper studied the tinplate reflowing process and performance .

使用X射线光电子能谱（XPS）分析方法，对镀锡铬酸盐钝化钢板中铬元素的含量、价态以及不同价态化合物的含量进行了研究，并对镀锡钢板铬酸盐钝化膜的形成机理进行了探讨。

The content and chemical valence of chromium element , and the content of compounds in different chemical valence in chromate passivation film formed on commercial tinplate via a cathodic dichromate treatment were studied by X-ray photoelectron spectroscopy ( XPS ) .

黄铜镀锡后用热处理方法使镀金属Sn和母材金属元素Cu、Zn等双向扩散，从而改变了镀层成份，强化了边界；

After brass is coated with Tin , heat treatment makes the coating metal Sn and the matrix metallic elements Cu and Zn diffuse with each other . This causes the coating composition to be changed and the boundary interface strengthened .

NUBri-tin工艺是一种具有优良工艺性能的新型宽温高稳定酸性光亮镀锡工艺。

NU Bri-tin process reported in this paper is a new acid tin plating process which possesses excellent technical performances .

简述了欧洲两片钢罐的镀锡DI材的发展现状及特点，其中着重介绍了欧洲两片钢罐的减重技术进展。

The situation and features of the development of two-piece steel cans and D & I coils in Europe are briefly introduced in the paper , with an emphasis on the progress in the light-weighting of two-piece cans .

GB150-1998钢制压力容器双相辗压镀锡薄钢片

Steel pressure vessels Dual-Reduction Tinplate