雾化

wù huà
  • atomize
雾化雾化
雾化 [wù huà]
  • [atomize] 指使液体经过特殊装置化成小滴,成雾状喷射出去

  1. 雾化吸入致肺心病病人死亡1例

    Death of a Patient with Pulmonary Heart Disease Caused by Atomize Inhalation

  2. 在工业上,已应用旋涡哨来雾化燃油和冷却水等。

    In the industry , vortex whistle has been applied to atomize fuel and cool water .

  3. 雾化过程比汽化过程对扰动更为敏感。

    The atomization process is more sensitive to disturbance than vaporization .

  4. 紧凑型荧光灯如果简单地安装在白炽灯的固定装置中,就会出现褪色、雾化和晦暗的视觉效果。

    A CFL cannot be simply installed in an incandescent fixture and then expected to produce a visual appearance that is more than washed out , foggy , and dim .

  5. 到美容院做光敏雾化,立杆见影

    Do photosensitive pulverization to beauty parlour , establish lever to see a movie .

  6. 本文采用超声波雾化技术,分别以乙醇和水做溶剂制备纳米TiO2粉体。

    The nano-powder of TiO_2 was prepared using the technology of ultrasonic atomization .

  7. 采用内标-脉冲雾化进样法,建立了微量体液的ICP-AES分析方法。

    A method of ICP-AES by the internal-standard-method and pulse-nebulization was established .

  8. 对雾化喷射成型法制备的SiCp/2014颗粒增强金属基复合材料的显微组织进行了分析。

    An analysis is made of microscopic structure of the metal matrix composit reinforced with SiC P / 2014 particulates formed by the spray forming .

  9. ICP-AES雾化法氢化法联合同时测定人血清中三十种元素

    Simultaneous determination of 30 elements in human serum using ICP-AES by nebulization and hydride generation methods

  10. 金属注射成形气雾化和水雾化316L不锈钢耐蚀性

    Corrosion resistance of metal injection molded and sintered gas-atomized and water-atomized 316L stainless steel

  11. 目的:观察静脉注射甲泼尼龙与短效β2受体激动剂特布他林雾化吸入联用对慢性阻塞性肺疾病(COPD)急性加重期的治疗作用。

    Objective : To investigate the improvement of pulmonary function by intravenous methylprednisolone combined with terbutaline solution for nebulization in severe exacerbation of COPD .

  12. 喘消雾化液对博莱霉素诱导大鼠肺纤维化模型IL-8、TNF-α水平的影响

    The effects of chuan-xiao-wu-hua-ye on the level of IL-8 and TNF - α in serum and BALF of bleomycin-induced fibrosis in rats

  13. 超声雾化Sn-Pb焊锡粉的组织特征及其抗氧化性能

    Microstructure Characteristics and Oxidation Resistance of Sn-Pb Solder Powder Fabricated by Ultrasonic Atomization

  14. 方法以鸡卵清蛋白(OVA)致敏和雾化吸入刺激BALB/c小鼠以诱发EOS在气道聚集后将其分离纯化。

    Methods BALB / c mice were sensitized and challenged by ovalbumin to recruit the aggregated eosinophil in the airways .

  15. 文中用微波等离子体炬(MPT)为激发光源,氩气为等离子体工作气体,用气动雾化进样,研究了微波消解微波等离子体炬原子发射光谱法(MPTAES)测定葡萄酒中的铅元素的方法。

    Microwave plasma torch atomic emission spectrometry ( MPT-AES ) was used to determine lead in wine after digestion .

  16. min-1;雾化温度70℃;

    The nebulization temperature was set at 70 ℃;

  17. 在OVA组、MT组和DXM组,雾化吸入4和8周后BrdU阳性细胞数目高于雾化吸入2周后(P均<0.05)。

    The number of BrdU-positive cell in group OVA , MT and DXM was more after 4 and 8 weeks OVA exposure than that after 2 weeks .

  18. 根据实验观察,给出了几种雾化模式的特征描述,并获得了水及NaCl溶液雾化模式的实验分布图。

    According to the experimental observation , the characteristics descriptions for several modes of spraying were presented and the experimental distributions of modes of spraying for water and NaCl solution were obtained .

  19. 气体雾化LaNi5型储氢合金粉末特性的研究

    Study on Characteristics of Hydrogen absorbing LaNi 5 Alloy Powder Made by Gas Atomization

  20. 目的:观察雾化吸入盐酸氨溴索对慢性阻塞性肺病(COPD)急性发作期患者痰液理化性质的影响。

    Objective : To investigate the influence of ambroxol hydrochloride for atomizing inhalation on the phlegm liquid and to explore a new way to treat chronic obstructive pulmonary disease ( COPD ) .

  21. 双轴织构银基带及YBCO薄膜的研究超声雾化热分解方法制备YBCO超导长带

    Study on Biaxially Textured Ag Substrates and YBCO High Temperature Superconducting Thin Films FABRICATION OF YBCO LONG TAPS ON TEXTURED Ag SUBSTRATES BY ULTRASONIC SPRAY PYROLYSIS METHOD

  22. 多级雾化Cu-Cr-Zr-Mg合金的组织和性能

    Microstructure and Properties of Multistage Atomization Rapidly Solidified Cu-Cr-Zr-Mg Alloy

  23. 用基于多普勒频移和相位差原理的LDV(LaserDopplerVelocimeter)技术研究了溶胶-电雾化系统中荷电雾滴的轴向速度及其分布,并分析了雾滴在输运过程中的受力情况。

    A laser Doppler velocimeter ( LDV ) was used to measure the droplets'axial velocity and its distribution induced by electrostatic spray and the forces acting on the droplets in their transportation are analyzed .

  24. 激光器熔融样品,并通过运载气体将熔融的样品物质传送到IP,而不是将样品溶解后,通过雾化器和雾化室将样品传输给ICP。

    Rather than having the sample dissolved and introduced via a nebulizer and a spray chamber into the ICP , the laser is ablating the sample and a carrier gas transports the ablated material to the ICP .

  25. 结果患者经沙培林雾化吸入后其T细胞亚群CD3、CD4、CD4/CD8和NK水平均高于治疗前,并接近于正常健康人水平,而空白对照组的T细胞亚群无变化。

    Results The levels of CD3 and CD4 lymphocytes , CD4 / CD8 and NK in study group were higher than those in control group , and were close to the normal standard .

  26. 采用全氟化碳(PFC)液体通气,尤其是雾化吸入治疗ALI较常规机械通气(CMV)有明显优势。

    The studies have shown that liquid ventilation , especially aerosol therapy with perfluorocarbon ( PFC ) has more advantages than conventional mechanical ventilation ( CMV ) in the treatment of ALI .

  27. 结论老年COPD急性发作期患者在进行雾化吸入治疗时,选择氧气驱动雾化吸入或喷射雾化吸入,可以减少不良反应的发生率,提高舒适度。

    Conclusion Compared with ultrasonic aerosol inhalation , oxygen derived and jetting aerosol inhalation could reduce side effects , raise the comfortable grade and ensure a effective treatment for elderly patients with COPD at acute attack .

  28. 结果表明:该算法能有效地克服基于LMS算法的自适应谱线增强器的不足,具有良好的抑制高斯有色噪声能力和跟踪性能。结论术后坚持雾化吸入有重要意义;

    The simulation results show that the proposed algorithm can effectively overcome the shortcomings of the traditional LMS-based ALE algorithm and has a great capability of suppressing Gaussian colored noise and the performance of tracing time-varying signals .

  29. AD法由低真空沉积室,喷咀,粉末雾化室,机械真空泵等组成。AD法具有沉积温度低(室温),沉积率高,涂层密度高,结合强度高等优点。

    The AD method is made up of a vacuum deposition chamber , a nozzle , an aerosol chamber and a vacuum pump , and has the advantages of low deposition temperature ( room temperature ), high deposition rate , dense coating layers and high adhesion strength .

  30. 利用Fluent商业软件对空气雾化喷嘴的喷雾场进行了模拟求解,讨论了喷嘴的结构对雾化效果的影响,并分析了喷嘴出口下游截面雾化粒径的分布情况。

    The paper simulated spray field of air blast atomizer with commercial software Fluent , discussed the effect of configuration of atomizer to spray result , and analyzed the distribution of spray particle size in the lower reaches of atomizer output .