雾化器

ISO型盐水喷雾试验机一阵香水的轻雾从雾化器中喷射出来。

ISO Salt Spray Tester A mist of perfume issued from the atomizer .

主营工艺水泵、挂缸过滤器、环保气泵、LED灯、水族配件、加热棒、雾化器等系列产品。

The main process pumps , hanging cylinder filter , environmental protection air pump , LED lamp , aquarium accessories , heating rods , atomizer series of products .

雾化器往复扫描喷射共沉积制备6066/SiCp坯锭技术

Preparation Technology of 6066 / SiC_p Billet by Spray Co-deposition with Scanning Atomizer To and Fro

采用ANSYS软件对振动网孔雾化器的模型进行了静力、模态和谐响应分析。

Static , modal and harmonic analysis are used to analyze the vibrating mesh nebulizer in ANSYS .

电热雾化器及其在ICP-AES中的分析性能研究

A Study on the Analytical Performance of the Thermospray Nebulizer for ICP-AES

用低功率微波热雾化器与十字交叉气动雾化器作为ICP-AES进样装置的比较

Comparison of a Low Microwave-powered Thermospray Nebulizer and a Pneumatic Nebulizer for ICP-AES

ICP-AES分析高盐样品时雾化器堵塞问题的研究

Investigation on Blockade of Nebulizer in Determination of the Saline Samples by ICP-AES

ICP-AES用微波热雾化器的研究

Studies on Microwave-Power Thermospray for ICP-AES

毛细管电泳与ICPMS雾化器之间的接口是CEICPMS联用技术的关键。

The interface between CE and the nebulizing system of ICP-MS plays a key role in the hyphenation of CE and ICP-MS.

一种用于ICP光谱法直接分析海水样品的高盐雾化器的应用研究

An Applied Research on a High Dissolved Salts Contents Nebulizer for Direct Analysed Seawater Samples by ICP Spectrometry

新型ICP光源雾化器喷口的工艺讨论

A Discussion on Manufacturing Technique of New Nebulizer and Sealing of The Two Nozzles Used for ICP Source

提出了雾化器往复扫描喷射共沉积制备6066/SiCp的装置和方法，并与传统的喷射共沉积装置进行了比较。

The novel device and the method to prepare 6066 / SiC_p billet by spray co-deposition with scanning atomizer to and fro were presented , and compared with that of the traditional spray co-deposition equipment .

电厂SCR空气雾化喷嘴的雾化特性研究一阵香水的轻雾从雾化器中喷射出来。

STUDY ON ATOMIZATION CHARACTERISTICS OF THE SCR AIRBLAST ATOMIZER IN ELECTRIC POWER PLANT A mist of perfume issued from the atomizer .

本文介绍了用于实验室规模的拌酸浸出装置及其实验结果，初步确定了影响“BA”型雾化器雾化性能的因素及其相互间的关系。

A laboratory installation for acid curing and the experimental results of acid leaching for some uranium ore obtained on it are presented in this paper .

超声雾化进样MIPAES测定铝的研究一种电感耦合等离子体（ICP）光谱分析用超声雾化器

A Study on Determination of Aluminum by Atomic Emission Spectrometry Using Microwave Induced Plasma Source and an Ultrasonic Nebulizer

根据拉瓦尔喷管原理设计出一种新型低压超音速雾化器，用63A焊锡和SnAg系无铅焊锡进行了雾化试验研究。

A new type atomizer designed on the theory of Laval jet is tested in atomization experiment with 63A solder and Sn Ag lead free solder .

激光器熔融样品，并通过运载气体将熔融的样品物质传送到IP，而不是将样品溶解后，通过雾化器和雾化室将样品传输给ICP。

Rather than having the sample dissolved and introduced via a nebulizer and a spray chamber into the ICP , the laser is ablating the sample and a carrier gas transports the ablated material to the ICP .

在直径为0.4m、高3m的实验塔中，采用NH3-H2O系统，以外混二流式喷嘴作雾化器，研究喷雾塔内的传质（？）

The mass transfer of H_2O-NH_3-air system in an experimental spray column (φ 400 × 3000 ) is studied with a pneumatic nozzle atomizer .

结果本次医院感染暴发由PA血清Ⅳ型引起，其主要流行因素是所使用的氧气湿化瓶、雾化器数量不足，消毒不严。采取相应措施后感染得以控制。

Results The nosocomial infection was caused by Pseudomonas aeruginosa serotype ⅵ, and the main epidemic factors were due to the insufficient oxygen humidifier and aerosolizer and non-strict sterilization , infection was controlled after preventive measures were adopted .

介绍了压电材料（PZT）的特性、压电换能器和超声波变幅杆的理论，本文给出了两种新型雾化器的模型，对雾滴的形成原理和影响雾化质量的因数进行了分析。

Characteristic of Piezoelectric materials PZT and theory of transducer and ultrasonic horn are introduced . Model of two new type nebulizers and analysis of aerosol forming are described in this paper . The factor of influence nebulization quality is also described .

等离子体增强液态源MOCVD主要由液体输运系统、真空系统、超声雾化器、等离子体增强系统、温度控制系统、自动控制系统、尾气处理组件等组成。

Meanwhile , the thesis points out that plasma enhanced liquid source MOCVD mainly consists of liquid delivery system , vacuum system , ultrasonic atomizer , plasma enhanced system , temperature control system , automatic control system , exhaust treatment components and so on .

采用Laval喷咀结构的Ⅲ型和Ⅳ型雾化器导液管末端在较宽的雾化压力范围内均呈现负压而插管无需伸出。

Aspiration is formed at the tip of metal delivery tube of type ⅲ atomizer and type ⅳ atomizer with Laval nozzles with a wide range of atomization pressure while the inner tube is not necessary to be protruded .

预膜气流式雾化器的结构尺寸对雾化结果的影响

Influence of Geometric Features on the Performance of Prefilming airblast Atomizers

三流式雾化器的液滴直径及雾锥特性

The uniform-size droplets of three-fluid atomizer and characteristics of spray angle

Y型煤水浆雾化器的流量特性实验

Experiment on the flow characteristics of Y-type coal-water slurry atomizers

燃烧器回油式机械雾化器原理、结构及设计

Working principle , structure and design of atomizer of burner

喷射成形二级结构雾化器的雾化过程数值模拟双喷口式雾化器双路喷嘴

Numerical simulation of atomizing process for spray deposition double-decked atomizer

为什么是一个电热比火焰雾化器雾化更敏感？

Why is an electrothermal atomizer more sensitive than a flame atomizer ?

喷雾干燥系统中高粘性物料雾化器的研究

Research on the atomizer of high viscosity materials in a spray-drying system

真空净油机高效雾化器和防泡沫装置

High efficiency atomizer and foam breaking device of vacuum oil purifying machine