驱动控制

  • 网络drive control
驱动控制驱动控制
  1. CNC齿轮测量中心驱动控制与传动系统设计

    Design of Drive Control and Mechanical Feed System for CNC Gear Measuring Center

  2. 一种基于DSP和CPLD的电动汽车驱动控制系统软硬件设计

    DSP and CPLD-based Design of Electric Vehicle Drive Control System

  3. 电动汽车驱动控制系统直接转矩控制的DSP实现

    Electric Vehicles Drive System of DTC Realized by DSP

  4. 基于模糊自整定PID的电动汽车驱动控制系统的研究

    The research of the drive system in electric vehicle based on fuzzy self-turning PID

  5. LCD驱动控制芯片逻辑部分设计与研究

    LCD Driver and Control IC 's Logic Part Design and Research

  6. LCD驱动控制时钟电路的设计

    A Clock Generation Circuit in LCD Driver and Controller

  7. 基于FPGA的107cm全色PDP驱动控制信号产生电路的设计

    Driving and Control Signal Design of 107 cm Color PDP Based on FPGA

  8. 在CCD测量系统中,系统驱动控制时序的协同设计是关键技术之一。

    In the CCD measuring system , collaborative design of control system timing-driven is one of the key technologies .

  9. PROFIBUS技术在变频驱动控制系统中的应用

    The Application of Profibus Technology in Free Frequency Drive Control System

  10. 设计了基于可编程控制器PLC的程序控制系统、直流电动机的驱动控制系统和数字显示系统。

    The program controlling system based on PLC , the drive system for controlling DC motor and the digital showing system has been developed in present work .

  11. 手机用彩色TFT-LCD驱动控制芯片的驱动电路设计

    The Design of Driver Circuits for Color TFT-LCD Driver IC Used for Mobile Phone

  12. 高速IPM模块的保护功能及驱动控制电路研究

    A Study of the Protective Function and Driving Circuit of the High Speed IPM Power Modules

  13. 结合可变气门电磁驱动控制的具体实现过程,对SoPC环境下的IP核复用,基于Nios软硬件协同的技术进行了具体讨论。

    The Nios based hardware / software codesign and IP reuse under SoPC are concerned through an implementation of Electromagnetic Valve Actuation .

  14. 智能模块及其分布式系统(SDS)在驱动控制、顺序控制和过程控制系统中已有成功的应用。

    Intelligence module and its distribution system has already been applied successfully in sports control , train control and process control system .

  15. 该方案支持手机用TFT-LCD驱动控制芯片的常规以及特殊项目的测试。

    The design method proposed in this paper can support normal and special tests of TFT-LCD driver IC very well .

  16. 分析了各部分的电路结构及特点,讨论了PWM脉宽调制信号生成、逻辑信号综合、驱动控制及电流截止负反馈的具体应用,在此基础上给出了实验数据及结果分析。

    It analyses some main circuits 's features , including PWM signals , logic synthesis , driver and negative feedback of current cut-off and at last gives the result of experiment .

  17. 在开阔场地性能自动测量系统应用程序设计中,提出了采用VISA和SCPI技术相结合的方法,作为仪器驱动控制方案。

    It introduces the combination of the VISA and SCPI technology as I / O control of instrument in developing EMC automatic measuring project .

  18. 系统采用程序设计模块化对系统进行分析与研究,系统在驱动控制中采用多边形磁链轨迹法(电压空间矢量法)的控制策略和混合PID控制算法。

    In the control software , the modularization of program design is used for system analysis and study . In the control of driving , the system adopts control policy of space vector PWM theory and control arithmetic of PID mixed .

  19. HR-200供热堆水力驱动控制棒系统运动研究

    Kinematic study on hydraulic control rod driving system for HR-200 heating reactor

  20. 基于dSPACE半物理仿真系统对绳索牵引机器人进行了实验研究,主要包括机器人的驱动控制特性实验和轨迹跟踪实验等。

    Based on the dSPACE system , the experimental study was conducted , which mainly included . the actuation control characteristic experiment , the trajectory planning experiment and so on .

  21. 本文针对现有基于压电陶瓷的驱动控制系统体积较大、功耗高和输出信号不稳定等缺点,引入嵌入式设计方法,设计了一种基于ARM技术的微流体驱动控制系统。

    According to the faults of existing driving control system which based on Piezoelectric ceramic , such as large size , high power consumption , unstable output signal , etc. this paper designed a microfluidic driving control system based on ARM technology by the embedded design method .

  22. 本文设计的模糊逻辑驱动控制策略简单实用,仿真效果优于常规电辅助控制,通过修改规则库能适应各种并联式HEV车型,因此该控制策略具备较强的推广应用价值。

    The fuzzy logic control strategy , which is simple and better than common electric aid strategy , can change its rules to meet other kinds of HEVs , so it has great vital force and can be used large scale .

  23. 本文首先阐述了磁浮轴承的差动驱动控制系统的基本原理,采用二元Taylor级数对该系统电磁力进行了简化,分析了各种简化的效果。

    At first , the basic principle of the differential drive control system of the magnetic bearing has explained in the paper , the electric magnetic force of the system is simplified by adopting two dimensions Taylor progression , and then various kinds of simple results are analyzed .

  24. 利用改进的自动电流、自动功率和自动温度控制原理,结合极性控制电路、LD和制冷器TEC保护电路,设计了LD驱动控制模块。

    Using improved principles of automatic current control ( ACC ), automatic power control ( APC ) and automatic temperature control ( ATC ), combining with polarity control circuit , LD protective circuit and TEC protective circuit , the LD driver control module is designed .

  25. 水力驱动控制棒静态特性实验研究

    Experimental Study on Steady State Property of Hydraulic Drive Control Rod

  26. 设计了新的压电陶瓷扫描器以及用步进电机驱动控制系统组成的多自由度纳米级三维移动平台等。

    Piezoelectricity ceramics scanner and more drive control systems are designed .

  27. 不同流速下电磁驱动控制棒的落棒特性

    Scram of electromagnetic control rod drive mechanism with various flow velocities

  28. 通过数值计算,分析了上置式水力驱动控制棒的落棒时间。

    The time of dropping rod was analysed by numerical simulation .

  29. 永磁同步直线电动机驱动控制策略

    Drive and Control Strategy for the Permanent Magnet Linear Synchronous Motor

  30. 交流电机驱动控制系统试验平台设计

    The Testing Table Design of AC Motor Driver Control System