启动机

  • 网络starter;starter motor
启动机启动机
  1. 一个独立工作的喷气燃油发动机的启动机被加了上去。

    A self-contained jet fuel engine starter was added .

  2. 为此,启动机必须从蓄电池得到足够的电能。

    To do this , the starter motor receives electrical power form the storage battery .

  3. NPQ-86型启动机性能试验台

    The NPQ-86 Starter Performance Test Bed

  4. 介绍了用微机控制的NPQ-86型启动机性能试验台的总体布置和工作原理。

    This paper presents the general layout and working principles of NPQ-86 test bed controlled by microcomputers for determining the starter performance .

  5. 启动机驱动安装在电枢转轴上的齿轮。

    The starter drive gear is mounted on the armature shaft .

  6. 永磁减速启动机的发展及其计算机辅助设计的特点

    Development of Permanent Magnet Reduction-gear Starter and its CAD Features

  7. 根据测试的结果分析了启动机的常见故障现象及原因。

    It analyses the common faults and causes based on results of test .

  8. 自动测量启动机特性曲线的试验装置

    Test Device with Function of Measuring Starter Characteristic automatically

  9. 汽车启动机的计算机辅助设计

    Computer aided design of automobile starting electrokinetic machine

  10. 启动机需要蓄电池提供大量的电流。

    The starter motor draws a great deal of electrical current from the battery .

  11. ST614型启动机驱动机构常见故障原因分析及其排除方法

    Analysis of the common malfunction causes and removal methods for driving mechanism of model ST-614 starter

  12. 启动机将蓄电池的电能转化为驱动发动机启动的机械能。

    The starter motor converts electrical energy from the battery into mechanical energy to turn the engine .

  13. 当大电流流过汽车启动机的线圈时,可以产生足以让发动机曲轴转动的力矩。

    An automotive starter motor has many conductors and uses a lot of current to create enough rotational force to crank the engine .

  14. 接着启动机将这部分电能转化成机械能,通过驱动机构传到发动机曲轴飞轮上。

    The starter motor then converts this energy into mechanical energy , which it transmits through the drive mechanism to the engine 's fly wheel .

  15. 本文研究汽车启动机电磁设计及特性曲线图形输出的计算机辅助设计系统。

    A system of computer aided design about the electromagnetic design and the curve output of the automobile starting eletrokinetic machine has been developed in this paper .

  16. 启动机外壳内装入电枢与磁极,外壳两端的轴承支撑电枢转轴,并将启动机与启动系统支架相连。

    The motor housing encloses the armature and pole pieces , holds the bearings that support the armature shaft , and provides the terminals for connecting the motor to the rest of the staring system .

  17. 适合启动机用的电刷是金属石墨电刷,由于其含铜量为75%~85%,电阻小,允许的电流密度大,故适用于低电压、大电流的汽车启动机。

    They are made of metallic carbon . The copper content is 75 % ~ 85 % . Due to low resistance and the current density allowable is so big that they are used for starters of low voltage and big current .

  18. 在用计算机辅助设计永磁减速启动机时,电刷接触压降可用一个电阻值来描述,步长的选择要合理,循环变量不能混淆。

    While in the design of this permanent magnet starter with CAD , the voltage drop of brushes can be described with a value of resistance , the selection of tooth length must be appropriate , and the variables of cycling must not be confused .

  19. 单击Run按钮启动客户机平台。

    Click the Run button to launch the client platform .

  20. 所有这些设置完成以后,可以启动客户机,然后调用Web服务

    After all these settings , the client can be started and then the Web service invoked

  21. WebSphereCloudburst模式提供参数,允许在启动虚拟机时进行配置更改。

    WebSphere CloudBurst patterns expose parameters that allow for configuration changes when starting virtual machines .

  22. 最后,它启动虚拟机和中间件软件组件(比如WebSphereApplicationServer),然后运行模式中包含的用户定义的任何脚本。

    Finally , it starts the virtual machines and the middleware software components ( such as WebSphere Application Server ), and then it runs any user-defined scripts included in the pattern .

  23. Eucalyptus以映像为基础启动虚拟机,映像可以预先部署仿真资源应用,这样,虚拟机启动后,就不用重新部署应用,还可以在虚拟机启动后进行二次部署。

    Eucalyptus runs the virtual machine based on image . The image can pre-deploy the simulation application , so that after the virtual machine runs , there is no need to deploy the application . We also can re-deploy or multi-deploy image after the virtual machine runs .

  24. 最后一个步骤是自动激活,在这个步骤中启动虚拟机,激活脚本将自动地运行,并且使用来自v-floppy参数文件的信息。

    The final step is auto activation , in which the virtual machine is powered on and the activation scripts automatically run , using information from the v-floppy parameter file .

  25. 增程器总成控制系统主要由上层控制其网络VCU、发动机控制单元EMS、发动机、发电启动一体机、发电机控制器IPU、及高低压线束、进排气系统组成。

    Extender assembly control system is mainly composed of the upper control the EMS network VCU , engine control unit , engine , generator , generator controller IPU , start machine and high and low voltage wiring harness , into the exhaust system .

  26. 采用冷启动模拟机(CCS)和MRV对小型旋转粘度计(OCP)粘度指数改进剂的低温流变学性能进行了测试,并将分析结果与粘度指数改进剂的分子结构进行了关联。

    The low temperature rheological properties of olefin copolymer ( OCP ) viscosity index improvers were measured by CCS ( cold cracking simulator ) and MRV ( mini rotary viscometer ) . The results were correlated with the molecular structures determined with 13 C NMR and gel permeation chromatography .

  27. 这时将启动客户机,并等待传入消息。

    This will start the client waiting for incoming messages .

  28. 无刷同步发电机启动异步机的探讨

    The discussion of brushless synchronous alternator starting asynchronous motor

  29. 启动洗衣机,使用热水键。

    Run the washing machine using hot water .

  30. 现在我们需要启动柴油机吗?

    Need we start the engine now ?