电子式

Air（初三适用）汽车电子式安全气囊

Automobile Electronic Safety Air Bag

基于VLAN技术的电子式互感器数字通讯的研究

Study on Digital Interface of Electronic Instrument Transducers Based on VLAN

基于电容分压原理的电子式TV一次侧设计

Design of Primary Converter for Electronic Voltage Transformers Based on Capacitive Divider

GIS用电子式电流电压互感器的应用研究

Application and Study on a Novel Combined Current and Voltage Transformer Which Can be Used in GIS

基于MSP430单片机的电子式热量分配表的研究与设计

Research and Design of Electronic Heat Cost Allocator on MSP430

本文介绍一种以PLC位制为主体的电气控制系统，它采用电子式接近开关做输入点，实现了对煤气双缸交换机的自动化控制，取得了显著的经济效益。

Electric control system with PLC is introduced . It adopt electron nearing switch as input dot , bring about the control of this system and gain remarkable success .

ABS是常规刹车装置基础上的改进型技术，可分机械式和电子式两种。

ABS is an improved technology based on traditional braking system , which can be classified into two types : mechanical and electronical one .

电子式互感器IED的软硬件设计与实现

Design and Implementation of the Hardware and Software of the Electronic Transformer IED

应用ABS能有效地提高汽车的行驶安全能力，彻底分析了电子式防抱死制动系统的控制原理和过程。

The application of ABS can improve the automobile driving safety ability significantly , the controlling theory and process of electronic ABS are thoroughly analyzed .

电子式电能表系列以及集中抄表系统的设计开发基于GPRS的水表远程集中抄表系统研究

The Design of Electronic Watt-hour Meter and Automatic Meter Reading System ; Study of Long-Range and Centralized Automatic Metering Reading for Water Meter Based on GPRS

根据测量用电子式电流互感器（ECT）的校验要求，研制了一种基于虚拟仪器的ECT模拟输出校验系统。

An ECT ( Electronic Current Transducer ) calibration system is designed based on virtual instrument technology to test the analog output of high-precision ECT .

电控机械式自动变速器主要有电子式和电液式两种，电子式的AMT可控性好，但其价格昂贵；

Now , the automated manual transmission has two main types & electronic AMT and electronic-hydraulic AMT . The electronic AMT is easy to control , but its price is very high ;

在研究IEC61850的基础上，给出了一种基于FPGA、DSP以及嵌入式以太网卡的合并单元的设计方案，解决了将电子式互感器应用于变电站自动化系统所面临的接口问题。

The paper also gives a design of Merging Unit ( MU ) based on FPGA / DSP and Embeded Ethernet Card , which solves the interface problem of applying electronic instrument transformers to substation automation system .

基于PIC16F876单片机设计了一种电子式热继电器。

A heat relay is designed on the basis of single chip PIC16F876 .

据现场工作的实际经验，介绍了提高电能量采集器与电子式电能表之间RS-485通讯网络的可靠性的措施。

According to the practical experience from worksite , the author introduces several measures for improving the reliability of the RS - 485 communication network between electric energy collect system and digital watt - hour meter .

因此，研究基于计算机技术、现代通信技术及数字处理技术的以电子式电流互感器（ECT）为代表的、新型的高精度电流互感器成了大势所趋。

Therefore , it is an inevitable trend to research a new kind of current transformer for high accuracy measurement such as electronic current transformer ( ECT ) which based on the technology of computer , communication and DSP .

首先，阐述了以电子式电能计量芯片ADE7755为核心的电能计量模块的硬件电路设计；

First , elaborated hardware circuit design of electric meter module by ADE7755 ;

本课题有效地解决了电子式热分配表中A/D转换电路测量温度进行热量计算、FLASH闪存储存数据、LCD显示数据、红外和射频无线传输数据等核心技术问题。

The core technical issues of heat cost allocators with electrical energy supply are effectively addressed such as , the A / D converter circuit to measure the heat for temperature calculation , FLASH memory for data storage , LCD display data , infrared data transmission .

DSSD型全电子式多功能电能表的抄读

Reading for DSSD Tpye Electronic Electric Energy Meter

电子式汽车仪表是一种采用单片机控制步进电机和LCD来显示汽车行驶过程中的车速、转速、油量、水温、里程等相关数据，并用LED实现仪表背光和报警指示功能的组合仪表。

Electronic automobile instrument is a kind combination meter controlled by SCM to show the speed , rev , fule level , cooling water temperature , mileage and other correlative data during the vehicle running . It applies the backlight to the instrument and the alarm function with LED .

设计了一种220kV气体绝缘开关用新型电子式电压互感器，互感器由电容分压器和数字变换器两部分组成。

A novel electronic voltage transformer used in 220 kV gas insulated switchgear is developed . The transformer consists of a capacitive voltage divider and digital converter .

根据电力系统电流测量和继电保护对电流互感器的不同准确度要求，设计了电子式低功耗电流互感器（电子式LPCT）。

The electronic low power current transformer ( LPCT ) is designed according to the different requirements on current transformers in electrical system .

介绍了IEC60044-8和IEC61850中规定的电子式互感器数字输出接口的特性，并设计了一种基于以太网的通信模块以实现此功能。

According to the requirement of standard IEC 60044-8 and IEC 61850 , the digital output interface characteristic of electronic instrument transducers is introduced . A communication model between the merging unit and the secondary equipment based on Ethernet is designed for substation automation system .

文中讨论了设计电子式变换器时对畸变信号及干扰应注意的问题。

The attentive problems of deformation wave and disturbance are discussed .

全电子式多功能电能表应用一例

An Example of Application of Full Electric Multi-functional Electric Energy MEter

一种新型单相电子式多费率预付费电能表

A new type of single-phase electronic multi-rate and prepayment Watt-hour meter

电子式多功能电能表功能需求的初步探讨

Primary Research of the Function Design of the Multi-function Electronic Meters

电子式标准电能表常见故障处理及注意事项

Treatment and Cautions Regarding Conventional Fault of Standard Electronic Watt Meter

电子式电流互感器的量程切换与信道合并技术

Technology to Switch Range and Merge Channel in Electronic Current Transformer

巨磁电阻直流电子式电流互感器智能化方法

An Intelligence Method for Giant Magneto-resistance Based DC Electronic Current Transformer