三元乙丙橡胶

对于不同的交联体系、三元乙丙橡胶（EPDM）进行了对比试验。

Contrast test of EPDM was performed for different crosslinking systems .

综述了CM与弹性体共混改性领域的研究进展，分别介绍了CM与天然橡胶、丁苯橡胶、丁腈橡胶、三元乙丙橡胶等10余种弹性体的共混研究概况。

Summarized the research progress of CM and the elastomer altogether mixes modification , separately introduced CM and the natural rubber , the butadiene styrene rubber , the nitrile rubber , EPDM and so on , more than 10 kinds of elastomers altogether mixs for the research survey .

采用自制的马来酸酐接枝三元乙丙橡胶/线形低密度聚乙烯共混物（（EPDM/LLDPE）-g-MAH），通过熔融共混挤出对回收光盘聚碳酸酯（PC）进行增韧。

Recycled CD Polycarbonate was toughened by maleic anhydride grafted EPDM / LLDPE through melt extrusion .

介绍了改性膨润土在三元乙丙橡胶（EPDM）无卤阻燃胶料中的应用。

The modified bentonite was applicated in halogen-free flame retardent EPDM .

美国DuPontDow公司的新型三元乙丙橡胶NordelIP

The new EPDM nordel ip of Du Pont Dow of american

对聚丙烯（PP）/三元乙丙橡胶（EPDM）共混合金的结构与性能进行了研究。

The structure-property relationship of ethylene-propylene terpolymer ( EPDM ) / polypropylene ( PP ) blends was studied .

将粉煤灰与三元乙丙橡胶（EPDM）混炼后与聚丙烯树脂熔融共混进行增韧改性。

Polypropylene was modified by using smelted ash powder / EPDM rubber blends as toughener .

改性FS对丁苯橡胶、三元乙丙橡胶、丁腈橡胶、羧基丁腈橡胶具有良好的增强效果。

Modified FS had good reinforcing effect on SBR , EPDM , NBR and CNBR .

加入超细改性无机刚性粒子提高三元乙丙橡胶（EPDM）的硬度，再与聚丙烯（PP）进行共混。

Modified EPDMs of different hardness were prepared by adding some ultra fine fillers into them , then blended with PP.

纳米CaCO3对三元乙丙橡胶（EPDM）材料力学性能影响研究

Study on the Impact of Nano-meter CaCO_3 on the Mechanics Properties of EPDM Rubber Material

提高电线电缆用三元乙丙橡胶（EPDM）材料的拉伸强度和伸长率。

Improved tensile strength and elongation of ethylene propylene diene monomer ( EPDM ) compounds used for wire and cable .

研究结果表明，5%的三元乙丙橡胶即可大幅度提高LLDPE的弯曲疲劳性能；

The results showed that the bending fatigue property of LLDPE was improved with 5 % of EPDM .

以丙烯酸酯橡胶（ACM）和三元乙丙橡胶（EPDM）为主要原料制备共混材料。

The blend of acrylate rubber ( ACM ) and ethylene propylene diene terpolymer ( EPDM ) was prepared .

综述了动态全硫化三元乙丙橡胶（EPDM）/聚丙烯（PP）共混型热塑性弹性体相结构、性能、加工成型及应用。

Phase structure , property , processing , molding and application of dynamic fully vulcanized EPDM / PP thermoplastic elastomer were summarized . [ WT5HZ ]

在聚丙烯（PP）中加入10%～40%质量份数的聚对苯二甲酸乙二脂（PET）、反应增容剂三元乙丙橡胶接枝甲基丙烯酸缩水甘油酯（EPDM-g-GMA）及成核剂对PP进行共混改性。

Polypropylene is modified by reactive blending with PET ( 10 % ~ 40 % Wt ), reactive compatibilizer EPDM-g-GMA and nucleating agent .

试验研究了纳米SiO2改性三元乙丙橡胶/聚丙烯（EPDM/PP）热塑性弹性体（TPE）的性能。

The properties of nano-SiO2 modified EPDM ( ethylene-propylene diene monomer ) / PPTPE were studied in this paper .

重点讨论了发泡剂AC、交联剂DCP对低密度聚乙烯/三元乙丙橡胶（LDPE/EPDM）发泡工艺的影响。

The influences of chemical blowing agent AC and cross - link agent DCP on LDPE / EPDM foam forming technology were discussed in detail .

比较了不同的动态硫化工艺和硫化体系对聚丙烯（PP）／三元乙丙橡胶（EPDM）共混物性能的影响。

Effectiveness of different dynamic sulfurization processes and sulfurization systems to the properties of polypropylene ( PP ) / ethylene-propylene diene copolymer ( EPDM ) blends is compared .

研究了采用聚氯乙烯（PVC）、三元乙丙橡胶（EPDM）为主体材料，氯化聚乙烯（CPE）为增容剂，并配以其他助剂制备PVC／EPDM合金。

The alloy with main materials of polyvinyl chloride ( PVC ), ethylene-propylene-diene monomer rubber ( EPDM ) and chlorinated polyethylene ( CPE ) as compatibilizer was studied .

介绍了汽车柴油发动机中冷器出气胶管的特点，比较了硅橡胶与三元乙丙橡胶（EPDM）的性能特征。

The characteristics of diesel engine intercooler rubber tubes are introduced , and the performances of silicone rubber and EPDM rubber are compared in the paper .

用浓硫酸和醋酸酐与三元乙丙橡胶（EPDM）反应制备了磺化三元乙丙橡胶离聚物（S-EPDM）。

Sulfonated EPDM ionomers ( S-EPDM ) were prepared with concentrated sulfuric acid and acetic anhydride .

DSC分析和热老化实验表明，红磷对三元乙丙橡胶材料的热老化稳定性有不良影响，可通过调整配方加以解决

The results of DSC and thermal aging tests indicate that the addition of red phosphorus decreases the thermal aging stability of EPDM . This problem can be resolved by adjusting the components

研究了三元乙丙橡胶（EPDM）和溴系阻燃体系对微孔LDPE隔热保温性能、力学性能和阻燃性能的影响。

The effect of Ethylene propylene terpolymer ( EPDM ) and bromine fire-retardant system on the heat insulation performance , mechanics performance and fire retardance of microporous LDPE was studied .

使用的原料有硅橡胶、氟橡胶、天然橡胶、氯丁橡胶、三元乙丙橡胶、丁基橡胶、聚氨脂橡胶、聚乙烯、聚丙烯、EVA、ABS、PP、PVC等。

The main materials we used are including silicone rubber , fluorubber , natural rubber , neoprene rubber , EPDM , butyl rubber , polyurethane , polyethylene , EVA , ABS , PP , and PVC .

采用动态光交联法制备了3种不同类型的PP/三元乙丙橡胶（EPDM）热塑性弹性体，探讨了PP的结构及化学组成、动态光交联时间对PP/EPDM热塑性弹性体性能的影响。

Three kinds of polypropylene ( PP ) / EPDM thermoplastic elastomer were prepared via dy - namic photocrosslinking method , and the effect of processing conditions on the properties of the products was studied .

采用宽角X射线衍射法（WAXD）和示差扫描量热法（DSC）研究了三元乙丙橡胶的型别与用量对聚丙烯结晶行为的影响。

By means of WAXD ( wide angle X ray diffraction ) and DSC , the effect of the type and dosage of EPDM on crystal behavior of PP ( Polypropylene ) was studied .

以充油三元乙丙橡胶（EPDM）、粉状聚丙烯（PP）、超细活性滑石粉为基本材料，采用动态硫化法在单螺杆挤出机组上制备EPDM/PP共混型热塑性弹性体（TPV）；

The oil-filled EPDM , PP and super-fine talc powder were used as main materials , and EPDM / PP-TPV was prepared in single screw extruders by means of dynamic vulcanization .

介绍了中温（80℃）硫化三元乙丙橡胶（EPDM）绝热层的各项性能，考察了促进剂种类对EPDM硫化特性的影响。

The properties of middle-temperature vulcanization ( MTV ) ethylene propylene diene monomer ( EPDM ) insulation were introduced . The influence of accelerant types on vulcanizing properties of EPDM was discussed .

将聚丙撑碳酸酯（PPC）与三元乙丙橡胶（EPT）共混制成弹性体。

In this paper , the blends of poly ( propylene carbonate )( PPC ), with ethylene propylene dienmischpolymere rubber ( EPT ) were prepared .

研究了交联剂1,2-聚丁二烯在三元乙丙橡胶（EPDM）/聚丙烯（PP）热塑性硫化胶（TPV）中的作用。

Thermoplastic vulcanizate ( TPV ) based on ethylene propylene diene monomer ( EPDM ) / polypropylene ( PP ) blends using dicumyl peroxide as curing agent were studied in this work .