主控制系统

  • 网络master control system;main control system;MCS
主控制系统主控制系统
  1. 基于嵌入式Web服务器的智能家居主控制系统

    Main control system of the intelligent home system based on embedded Web server

  2. 最后,本文重点介绍了基于ⅡC总线配置喷头参数和油墨温压曲线的软硬件设计过程,实现了主控制系统对多个喷头的高效管理和精确控制。

    At last , this paper introduces the hardware and software design process which about nozzle parameters and T-V configuration based on the ⅱ C , and realizes that the main control system effectively manage and control multiple nozzle .

  3. 同时该模块通过3个8位IO口和主控制系统联系,将传感器信息上传至主控系统。

    At the same time , the module sends the information of sensors to the main control system by three 8-bit IO interfaces .

  4. 500t快速挤压机主控制系统电气改造

    Reform to the electric part of the main control systen of 500t fast extruder

  5. 最后经过大量的实验,检测系统已成功驱动CCD正常工作,控制图像数字器XRD98L59和外部存储器进行样本数据的采集,与主控制系统建立了稳定、可靠的通信连接。

    The experimental results prove CCD has been driven and sample image have been acquired using image digitizer ( XRD98L59 ) and exterior memories . Besides , detection system has accomplished a stable and reliable communication with the main controll system .

  6. 汽车排放测试主控制系统开发及其应用

    Development and Application of Host Controlling System for Vehicle Emission Test and Analysis

  7. 传统的自动扶梯在应对危险或风险时所执行的安全功能是由其主控制系统来实施的。

    The classical escalator performed safety functions through its main control system when danger or risks occured .

  8. 本文开发的氨氮在线检测系统,包括主控制系统及水样采集子系统的硬件及软件设计。

    The ammonia nitrogen on-line detection system includes a master control system and a water samples collecting subsystem .

  9. 本文首先分析了主控制系统的结构设计及功能实现,初步建立了各系统的数学模型。

    The main structure and function of control system are analyzed firstly . Some mathematics model are established .

  10. 上海地铁主控制系统半实物仿真与测试研究

    Research and Design of HILS and Integrated Testing System of Main Control System Used in Direct Current Locomotives in Shanghai Metro

  11. 主控制系统主要对整机各子系统进行控制和管理,并对外围功能模块进行控制;

    The chief control system is responsible for the management and control of the subsystems as well as the peripheral functions .

  12. 主控制系统对整机各子系统进行控制和管理并对外围功能进行控制,电磁振动给料控制系统负责系统物料流量的调节。

    The former can control and manage all subsystems and peripheral functions , while the latter can adjust materials ' flow capacity .

  13. 该模型的建立是设计燃气轮机主控制系统不可缺少的重要环节。

    Building the dynamic mathematical model is the necessary and important step in the procedure of designing the main controlling system of gas turbines .

  14. 本文简要介绍了自强号油气处理平台的电源、主控制系统和探火系统。

    The design of the power system , main control system and fire detection system of the Zhiqiang process platform are discussed in the paper .

  15. 经过对系统工作要求和结构的分析,设计了主控制系统、触摸屏系统、电磁振动给料系统三部分。

    The chief control system , touch screen system and electromagnetic vibration feeding system are designed based on the analysis of the working request and system structure .

  16. 在分析系统结构及工作原理的基础上,着重探讨了三极管粘片机主控制系统、视觉定位系统、晶粒拾取粘接时序控制等关键技术。

    Based on the analysis of system structure and working principle , the design of control system , visual position system , control sequence of pick up and mount chip has been carried out .

  17. 矿井提升机计算机控制系统主要由以下五部分组成:多功能数字深度指示系统、主控制系统、全数字直流调速系统、上位机管理系统和信号系统;

    The computer control system for mine auxiliary hoist includes signal system , multifunction digital indicator , main control system , DC speed regulated system of complete digitization , and computer monitor and control system .

  18. 为了进一步提高自动扶梯的功能安全性和可靠性,最新的自动扶梯国家标准要求将自动扶梯安全检测功能与其主控制系统相分离。

    In order to further improve the reliability and safety of escalator in functional safety , the latest national standard about escalator requires that escalator safety detection function should be separated from its main control system .

  19. 本系统采用的是德国西门子公司制造的可编程控制器,可编程控制器的输入与输出端口配置和主控制系统软件的设计是按照等离子弧喷涂工艺流程要求来确定的。

    The programmable controller used by the system was manufactured by the Semen 's Company in German , and it 's input and output were determined according to the request for plasma arc spraying technological process .

  20. 另外在电路设计过程中,充分考虑了电源保护这个问题,采用瞬态抑制、浪涌抑制和熔丝相结合的方法保护电路,并把反馈电流信息通过接口上传给主控制系统进行处理。

    Beside these , considering the power supply protection , adopt transient voltage suppressor , surge suppressor and fuse to protect the circuit , and the feedback current is sent to the main control system to deal through interface .

  21. 中板粗轧主传动控制系统PROFIBUS-DP总线的设计与应用

    Design and application of main drive PROFIBUS-DP bus for medium plate rough rolling

  22. 宝钢No.6抓斗式卸船机主传动控制系统

    Main Drive Control System of No.6 Grab Ship Unloader in Bao Shan Iron and Steel

  23. 工作原理是通过图像采集模块采集图像信息,经过FPGA模块进行图像预处理,然后由DSP模块进行图像处理,最后将棋盘棋子变化信息显示,同时传输给上位机主处理器控制系统。

    The working principle : image acquisition module collect image information , which is then preprocessed by FPGA module and processed by DSP module , finally , the change information of chess board and pieces will be displayed , and transmited to main processor control system simultaneously .

  24. 无菌液态奶灌装机主电动机控制系统研究

    Research of Main Motor Control System on Aseptic Milk Filling Machine

  25. 新型免疫控制器在主汽压控制系统中的应用研究

    Application of A New Immune Controller in Main Steam Pressure Control System

  26. 周期式轧管主电机控制系统改造探讨

    The Study on the Rebuild of Pilger Rolling Main Motor Control System

  27. 涡扇发动机主燃油控制系统建模与仿真研究

    Modelling and Simulation of main fuel control system for a turbofan engine

  28. 电厂锅炉主联锁控制系统设计与应用

    Design and Application of the Power Plant Boilers ' Main Interlock Control System

  29. 岩棉生产线主传动控制系统的分析与改进

    Analysis and improve of main drive control system of mineral wool production line

  30. 宝钢冷轧厂卷取电机主回路控制系统的改造

    Modification of Control System of BAO GANG Tandem Mill Tension Reel-motor Main Circuit