吹塑薄膜

以增湿法制备了PVA吹塑薄膜，研究了含水率对薄膜力学性能及光学性能的影响。

Mechanical and optical properties of PVA blown film with different rates of water contents prepared by wet process were investigated .

我国FFS袋用吹塑薄膜发展动态

Development Trends of Blown Film for FFS Bag in China

在现有吹塑薄膜机组上生产农用PE引水软管

Production of PE Diversion Soft Tube for Farming with the Existing Blown Film Moulders

LLDPE吹塑薄膜的结构与性能

Structure and Properties of Blown Molding LLDPE Films

FFS袋用吹塑薄膜生产线的技术经济评估

Techno-Economic Evaluation on the Construction of FFS Bagging Blown Film Producing Lines

结果表明，随着PVA吹塑薄膜含水率的增加，其拉伸强度下降，但断裂伸长率增加。

Results showed that the tensile strength decreased with increasing water contents in the film , but at the same time elongation at break was raised .

研究了成核剂对LLDPE吹塑薄膜结晶结构，进而对薄膜的透明性和力学性能的影响。

The effect of nucleation agents on the crystalline structure , mechanical properties and transparency of blown molded LLDPE films were evaluated .

FFS袋用吹塑薄膜的生产技术和性能指标研究

The Research of Production Technique and Specification of Blown Plastics Film Used in FFS Packaging Bag

采用相差显微镜和电子显微镜观察了HDPE/SBS共混改性吹塑薄膜的取向，并用双折射、广角X光衍射和红外光谱等仪器测量和分析了随SBS含量的变化，对共混改性薄膜取向性的影响。

The orientation of HDPE / SBS blending blown film is studied with the phase contrast microscope and SEM . The wide angle x-diffraction , birefringence and infrared spectrometer are used to measure the changes in orientation of blending film with SBS .

研究发现，振动力场的加入使m-PE-LLD吹塑薄膜的横向强度增大、纵向强度减小，纵、横向拉伸强度趋于均匀。

It was observed that the vibration improved the uniformity of the strengths of m-PE-LLD blown films in the longitudinal and transverse directions .

结果表明，在LLDPE（LDPE）中加入20%mPE制成共混料，其吹塑薄膜的拉伸强度和撕裂强度均提高20%，穿刺强度提高60%（100%）；

The result showed that the tensile strength and tear strength of the film were improved by 20 % when 20 % mPE was added into LLDPE ( LDPE ) , and the puncture strength increased by 60 % ( 100 % ) .

用一种双峰分布茂金属聚乙烯（mPE）与普通聚乙烯（LLDPE或LDPE）共混料吹塑薄膜，测定mPE对薄膜力学性能的影响。

A kind of bimodal metallocene PE ( mPE ) was blended with two conventional PE ( LLDPE or LDPE ) . After blowing films with the blend , the effect of metallocene PE on the mechanical properties of films was investigated .

FFS袋用吹塑薄膜具有包装速度快、洁净、环保、美观等优势，随着国内合成树脂装置生产规模的扩大，FFS袋用吹塑薄膜将替代传统复合编织袋成为合成树脂包装领域的主导产品。

Along with enlargement of synthetic resin plant in China , blown film for FFS bag , which has advantages of quick packaging , clean , beauty and environment friendship , will replace the traditional woven sacks in future .

添加剂对聚乙烯吹塑薄膜质量的影响

The Effect of Auxiliary Agent on the Quality of PE Film

低发泡吹塑薄膜成型工艺

Study on fabrication technique of the low blown foam special film

新型多层共挤复合吹塑薄膜旋转模具的设计

Design of the New Spin-mould for Multi-layer Co-extrusion and Composite Plastics Film

HDPE/SBS共混改性吹塑薄膜取向性的研究

Study on Orientation of HDPE / SBS Blending Blown Film

吹塑薄膜成型工艺建模及仿真研究

Study on Modeling and Simulating of Plastic Blown Film Process

吹塑薄膜用螺旋芯棒机头的设计要点

The Design Point of Spiral Mandrel Blown & film Die

4F0.06AC树脂吹塑薄膜技术的探讨

Inquiring into Technique of 4F 0.06 AC Resin Blown Film

GB4455-1994农业用聚乙烯吹塑薄膜GB13735-1992聚乙烯吹塑农用地面覆盖薄膜

Polyethylene blown film for agriculture Polyethylene blown mulch film for agricultural uses

如何提高吹塑薄膜的收卷质量

How to Improve the Winding Quality of Blown Film

农用吹塑薄膜加工设备技术新进展

The new development of agricultural blow film equipments technology

吹塑薄膜生产过程中的运动学、动力学及热交换的研究

Study on Kinematics , Dynamics and Heat Transfer in the Film Blowing Process

内冷控制技术在吹塑薄膜机组中的应用及发展

Development and Application of Inner Cooling Control Technology to Blown - extrusion Film Unit

吹塑薄膜膜泡冷却系统的设计研究

Internal Cooling System for Blown Film Bubble

主要分析了添加剂对聚乙烯吹塑薄膜质量的影响。

The effect of the auxiliary agent on the quality of PE film were analyzed .

吹塑薄膜生产线的新发展

New Developments in Blown Film Lines

GB4455-1994农业用聚乙烯吹塑薄膜

Polyethylene blown film for agriculture

迄今为止，该材料已测试成功的注塑成型，压缩成型和吹塑薄膜。

To date , the materials have been tested successfully in injection molding , compression molding and blown film .