挤出机

W2-73-18V挤出机传动系统的分析

The analysis of the model w_2-73-18v extruder 's transmission system

该机组采用锥形双螺杆挤出机，可生产粉料PVC波浪板制品。

This production line adopts conical double-screw extruder , and it is capable of producing wavy products with PVC powder material .

混合机，挤出机，双螺杆挤出机，破碎机，压片破碎机，磨粉机，制粉设备

Mixer , extruding machine , double screw rod extruding machine , breaker , sheeting breaker , pulverizer .

心排血量（CO）；啮合同向双螺杆挤出机分散混合性能的数值模拟研究

The Simulation of Dispersive Performance of the Intermeshing Co - Rotating Twin - Extruders

PP熔体在非啮合双螺杆挤出机中流动的数值模拟

Flow Field Numerical Simulation of PP Melt in Non-intermeshing Twin Screw Extruder

ABS工程塑料挤出机烟气净化工艺研究

Study on flue gas cleaning process for ABS engineering plastic extruders

采用双螺杆挤出机熔融接枝的方法，研究了多组分体系下不同单体熔融接枝聚丙烯（PP）的性能。

The property of multi-monomer melt-grafted PP was studied by means of single-screw extruder .

以废旧PP、锯末木粉为原料，采用双螺杆挤出机造粒生产环保型塑木复合材料。

Recycled polypropylene ( PP ) and wood powder were employed to prepare composites via twin-screw extrusion .

F2型可编程控制器在全钢丝子午胎三复合挤出机胎侧胶条敷贴器中的应用

Application of F_2 PLC in Full Steel Wire Meridian Tire Tape Pasting Equipment of Three Complex Extruder Side of Tire

采用PE和EVA，通过用SJ-45B挤出机两次共混挤出的方法改性PET。

PET is modified by twice-blending with PE and EVA ona SJ-45B extruder .

介绍了W2-73-18V平行双螺杆挤出机传动系统的结构，并对其进行了详细的分析。

The strucure of transmission system in the model W2-73-18V parallel twin-screw extruder is introduced , and it is analysed in detail .

在新设计的三复合挤出机控制系统中，采用了PROFIBUS-DP网络。

In the control system of new design tri-extruder , adopted PROFIBUS-DP network .

借助于装有玻璃视窗的可视化啮合同向双螺杆挤出机，对高密度聚乙烯（HDPE）颗粒在螺纹元件组合中的熔融过程进行了研究。

Extrusion of HDPE pellets in flight elements combination is studied by visualized co rotating twin screw extruder .

计算结果表明：LDPE熔体在双螺杆挤出机中得到了充分的混合。

The calculation results show that the LDPE melt is fully blended in the twin-screw extruder .

RPS、CPE、PS、PE在不同温度下用反应式挤出机熔融共混。

RPS , CPE , PS and PE were melt blended in a reactive extruder at different , temperature .

本文所设计的交联电力电缆生产线监控系统已用于多家企业，控制系统的主要控制部分（挤出机和交联管的温度控制，共有32个温度控制点）采用闭环PID控制。

The temperature control , including the extructors and the XLPE tube was the main part of the control system , which adopted the PID closed loop control .

研制了适于加工UHMWPE管材、棒材及异型材等制品的柱塞式挤出机。

The plunger extruder is developed for suiting to process UHMWPE pipes , rods and profiles , etc.

介绍粒状线性低密度聚乙烯（以下简称LLDPE）在国产单螺杆挤出机加工试验和相应的工艺技术。

The paper introduces the processing test and technique of particle LLDPE on single-screw extruder made in China .

通过在挤出机中添加过氧化物的方法，成功地在LLDPE装置上生产出滴灌管专用料，并提出了生产滴灌管专用料的典型配方和工艺参数。

The LLDPE speciality resin BD used in drip irrigation tube was developed by adding peroxide to extruder .

从控制PVC异型材挤出机的工艺参数的角度，分析并论述了挤出机工艺参数对PVC异型材低温落锤性能的影响。

Through controling the process parameter of PVC extruction profile , affect of process parameter on impact intest in low temperature was analysed and discussed in this paper .

PVC塑窗异型材生产线有锥形双螺杆挤出机、真空定型台、牵引机、切割机、贴膜机、翻料架等组成。

This machine consists of cone double screw extruder , vacuum setting table , drawing machine , cutting machine , film sticking machine , material tumbling frame , etc.

结果表明：木粉含量、偶联剂和双螺杆挤出机的螺杆转速都对复合材料的存储模量（E′）和损耗角正切值（tanδ）有一定影响。

The results show that the mechanical properties of composites are affected by wood flour loading , coupling agent and rotation speed of the double screws of extruder .

在振动力场作用下的三螺杆动态混炼挤出机上，采用硫磺硫化体系对不同配比EPDM／PP共混物进行动态硫化实验。

Dynamic vulcanization of EPDM / PP blends with sulphur curing system was carried out in a vibrating force field at controlled frequencies and amplitudes .

SJSZ系列锥形双螺杆挤出机，是一种适合于各类PVC粉料挤出的专用设备。

SJSZ series conic twin-screw extruder is professional equipment for extruding kinds of PVC powder .

在哈克流变仪和双螺杆挤出机对苯乙烯（St）/马来酸酐（MAH）/聚丙烯（PP）熔融接枝进行了研究。

Maleic anhydride ( MAH ) and styrene ( St ) melt-grafting onto polypropylene ( PP ) was conducted in haake torque rheometer and twin screw extruder .

以聚烯烃弹性体POE（乙烯辛烯共聚物）为增韧剂，以纳米CaCO3为增强剂，利用双螺杆挤出机，通过熔融共混工艺制备了聚丙烯（PP）/POE/无机纳米粒子复合材料。

With polyolefin elastomer as toughener and nano-CaCO 3 as reinforcer , PP / POE / nano-CaCO 3 was prepared by melting blend in a twin-screw extruder .

利用转矩流变仪、单螺杆挤出机和增塑剂将天然淀粉转变为热塑性淀粉（TPS）。

The native starch was transformed to thermoplastic starch ( TPS ) by the torque rheometer , single screw extruder and plasticizers .

小试研究了基础树脂、成核剂种类与含量、其它助剂及加工过程中挤出机温度与转速对PP透明性的影响。

The influences of basic resin , nucleating agents and its content , other agents , extrusion temperature and rotating velocity on the transparency of PP are studied by lab experiment .

采用加工助剂与超声辐照相结合的方法，实现了超高分子量聚乙烯（UHMWPE）在一般单螺杆挤出机上的挤出加工，提出了流动改性机理；

Processing aid agents and ultrasonic wave were introduced during processing of ultrahigh molecular weight polyethylene ( UHMWPE ) with a general single-screw extruder .

通过聚苯硫醚（PPS）与大颗粒氧化镁（40~325目）混合经双螺杆挤出机挤出造粒制备了导热绝缘塑料。

Thermal conductive insulating PPS plastics were made by extrusion compounding PPS with MgO particles of large particle sizeBF ( 40 ~ 325-mesh ) BFQ .