改性乳化沥青
- 网络modified emulsified asphalt;modified asphalt emulsion
-
皂液pH值对改性乳化沥青性质的影响
Influence of Soap Solution 's pH Value on the Property of Modified Asphalt Emulsion
-
实验中的改性乳化沥青不但能够满足公路路面施工技术规范的要求,而且较传统乳化沥青降低了成本,将产生良好的经济效益。
The modified asphalt emulsion not only meet highway surface construction technology criteria requirement , but also has good economy efficiency which has lower cost compared with traditional asphalt emulsion .
-
液体星型SBS改性乳化沥青生产
The Production of Modified Emulsified Bitumen for Liquid SBS Model Star
-
SBR改性乳化沥青透层在京张高速公路上的应用
Application of Modified Emulsified Bitumen to the Beijing-Zhangjiakou Expressway
-
SBS改性乳化沥青生产技术探讨
Study on Production Technology of SBS Modified Emulsified Asphalt
-
SBS胶乳研制及对改性乳化沥青的影响
The synthesis research of emulsified SBS and effect of emulsified SBS to modified emulsified asphalt
-
SBS改性乳化沥青在赤通高速公路施工中的应用
Application of SBS emulsified modified emulsified asphalt to the construction of Chifeng to Tongliao Expressway
-
SBR改性乳化沥青稀浆封层在乡村道路路面工程中的应用
Application of Slurry Seal Coat of SBR Modified Emulsified Asphalt in Pavement Project of Rural Road
-
通过对SBR改性乳化沥青稀浆封层技术在乡村道路砂石路面上的应用,提出作为路面封层的配比、生产工艺及施工工序。
The application of SBR modified emulsion asphalt slurry seal in used pavement reconstruction is presented .
-
SBS聚合物改性乳化沥青作为桥面防水粘结材料路用性能研究
Study on road performance of SBS polymer modified emulsified asphalt for bridge waterproof and cohesive layer
-
就液体星型SBS改性乳化沥青生产中,原材料、生产工艺、乳化设备的选择及生产影响因素进行了论述。
The paper discussed the raw materials , production technology , the choice of emulsified equipment and influenced factors in the production of modified emulsified bitumen .
-
而SBS改性乳化沥青的效果虽然较好,但由于乳化困难,一直没有大范围的使用。
And the effect of emulsified asphalt SBS modification is good , but because of emulsified difficulties , never be in a wide range of use .
-
SBR改性乳化沥青做为高速公路下封层、粘层,是将乳化沥青的应用向前推进了一步。
The SBR modified emulsified bitumen does for the highway under the sealing course , the tacky surface , was prompted forward the emulsified bitumen application step .
-
介绍了影响SBS改性乳化沥青生产的因素,分别从SBS改性沥青、乳化剂、乳化沥青生产工艺、乳化沥青生产设备等几个方面进行了探讨。
Discussion on factors affected the production of SBS modified emulsified asphalt from SBS modified asphalt , emulsifier , production process and equipments for emulsified asphalt ect .
-
简述改性乳化沥青的生产方法并介绍了一种生产SBS改性乳化沥青的新技术。
The production methods of modified emulsion are discussed in this thesis and a kind of new technique for SBS modified emulsion production is put forward and introduced in details .
-
采用SBR改性乳化沥青、SBS改性沥青和日本环氧粘结剂三种层间粘结剂,利用直剪试验和拉拔试验进行层间抗剪性能分析,可以推荐出适合不同条件的粘结层材料。
Adhesive layer materials for different conditions may be recommended by using of direct shear test and pullout test with SBR modified emulsion asphalt , SBS modified asphalt and Japan epoxy binder .
-
得到了以下结论:液/非复合乳化剂(7∶3)制备SBR改性乳化沥青,乳液质量最好;
And the results was made : the modified emulsified asphalt with SBR was the best prepared , using the compound emulsifier mixed by the proportion of 7 ∶ 3 between positive emulsifier and nonionic emulsifier .
-
微表处技术作为主要的养护措施虽然已经在国内得到了大力推广,但是目前所使用改性乳化沥青多采用SBR胶乳为改性剂,品种单一,高温稳定性不够理想。
The micro-surfacing technology as the main maintenance measures though has vigorously promoted in the domestic , at present the modification emulsified asphalt mostly using modifying agent as SBR latex , it is single in species , and insufficiently ideal in a high temperature stability .
-
氮丁胶乳改性乳化沥青的软化点约54℃,5℃延度约16cm,与高温聚合型丁苯胶乳大致相当。
Performance of asphalt emulsion modified by CR latex was similar with high-temperature polymer SBR latex-softening point about 54 ℃ , ductility of 5 ℃ about 16 cm .
-
结果表明:在聚合物加入量3%的情况下,高温聚合型丁苯胶乳改性乳化沥青的性能较差,其蒸发残留物的软化点低于55℃,5℃延度小于20cm;
It was found that , with 3 % polymer , performance of the asphalt emulsion modified by high-temperature SBR latex was not satisfied , its softening point was under 55 C , ductility of 5 ℃ was below 20 cm .
-
而低温聚合型丁苯胶乳改性乳化沥青的性能较好,其蒸发残留物的软化点在56~60℃,5℃延度大于150cm;
But performance of the asphalt emulsion modified by low-temperature polymer SBR latex was better , its softening point was between 55-60 ℃, ductility of 5 ℃ submit 150 cm .
-
水泥改性乳化沥青混凝土力学性能与微观机理
Mechanical Properties and Microcosmic Mechanism of Cement Modified Asphalt Emulsion Concrete
-
改性乳化沥青-水泥就地冷再生混合料性能研究
Research on Performance of Modified Asphalt Emulsion-cement Cold In-place Recycling Mixture
-
改性乳化沥青做高速公路下封层试验
Experiment on Sub-sealing Course by Modified Emulsified Bitumen in Highway
-
浅议改性乳化沥青稀浆封层
Simply Talking about Slurry Seal Coat of Modified Emulsified Asphalt
-
从理论上确定了改性乳化沥青的研究方向。
Theoretically determine the direction of research on the modification emulsified asphalt .
-
改性乳化沥青下封层施工质量控制
Construction Quality Control of Under-sealed Layer for Modification Emulsified Asphalt
-
改性乳化沥青稀浆封层技术质量控制要点
Essentials in the Quality Control of Slurry Sealing with Modified Emulsified Asphalt
-
复合式改性乳化沥青稀浆封层技术的实验研究
Compound Modified Emulsion Asphalt slurry Seal Coat Technology Research
-
转相法低温丁苯胶乳改性乳化沥青的制备
Styrene-butadiene rubber latex modified bitumen emulsions prepared by phase inversion in low temperature