消除应力

采用电渣重熔、合理配锭以及集细化晶粒、扩氢、消除应力为一体的锻后热处理工艺，生产出了满足用户要求的产品。

With ESR process , the reasonable ingot match and the after forged heat treatment process which is integrated with the process of refined grain , hydrogen expanded and stress relieving , the satisfied products have been manufactured .

改进型盲孔法在铁塔焊接接头热时效消除应力中的应用

Application of Improved Blind Hole Method to Welded Iron Tower Joint for Stress Relieving with Heat Aging

压力容器用低合金高强度钢消除应力裂纹的研究&微量硼对Mn-Mo-Nb钢SR裂纹敏感性的影响

Influence of Trace Boron on the susceptibility of mn-mo-nb steel to SR cracking

研究了消除应力回火对高强钢HAZ韧性的影响。

In this paper , the effects of stress relief tempering on the HAZ toughness in HSLA steels are investigated .

CF-62钢焊后消除应力热处理脆化的研究

Study on stress relief embrittlement of CF-62 Steel Welded Joint

在690℃的消除应力热处理温度下，保温5h时异种钢熔合区韧性最好。

The toughness of fusion zones reach to the maximum value under stress-relief condition at temperature 690 ℃ holding for 5 hours at that temperature .

本文研究的PK预应力叠合楼板是通过不断改进传统预应力叠合板后研制的一种新型叠合楼板结构，其预制构件为带肋薄板，预应力筋采用螺旋肋消除应力高强钢丝。

PK prestressed composite slab is a new composite floor structure by improving the traditional prestressed composite slab , its precast slab is a prestressed ribbed panel of which prestressed steel is a spiral ribbed high-strength wire , which make the precast component a higher stiffness and buckling capacity .

焊后应及时进行整体消除应力热处理；

After jointing , proceed the whole hot dissolving on time ;

振动时效工艺在大型槽罐消除应力的作用

Application of Vibrating Aging Process in Reducing Stress of Heavy Tank

丁字焊缝残余应力分布及振动消除应力的研究

A Distribution of Residual Stresses in T Weld and Its Vibration Stress-Relief

拼接法兰应进行焊后消除应力热处理。

The long neck flange should have stress-relief heat treatment after welding .

低合金高强度钢消除应力裂缝的研究

An investigation on stress & relief cracking in low alloy high strength steels

振动时效法消除应力的应用研究

Study on Application of Eliminating Stress by Vibration Ageing

振动消除应力技术的应用

The Application of Technology for Vibration Stress Relief

为了消除应力，研究了添加剂的作用以及加入量的控制。

In order to remove stress , the effects of some additives are studied .

消除应力处理；

Stress relief ( SR ) treatment ;

氨气保护消除应力退火工艺试验电化学保护

Removing Stress Annealing Experiment under Ammonium Protection

大型油罐开孔壁板制作及焊后消除应力热处理

The fabrication of opening shell plate of large oil tank and post stress relief heat treatment

爆炸消除应力处理对焊接接头中残留裂纹行为的影响

The influence of explosion relieving residual stress treatment on the behavior of cracks remained in welded joint

辊材堆焊锤击消除应力机理及随焊锤击系统研究

Research on Stress Relief Mechanism by Peening Roll after Surfacing Welding and Welding with Trailing Peening System

或者改变凹模结构以彻底消除应力集中现象。

Another project is to modify the structure of die in order to eliminate the stress concentration completely .

介绍了振动消除应力技术的原理和特点及其应用范围与应用实例。

The technique principle , characteristics and application scope and examples of VSR are introduced in this paper .

研究了低合金高强钢热影响区消除应力脆化的产生原因及其影响因素。

The reasons and affecting factors are studied for stress elimination embrittlement in HAZ of HSLA steel weldment .

通过采用塑料制品的一般设计原则和塑料制品的后处理工艺可有效地消除应力集中现象。

The stress concentration can be resolved effectively by adopting general design principle and post-treatment technology of plastics products .

轮式装载机行驶中振动对物料完整性的影响◆机架，刀架采用整体焊接结构，经振动消除应力，精度保持性好。

Effect of vibration to moving wheel loader on materiel integrality Machine frame and tool rest are welded systematically .

合理的接头结构应能减小弯矩，消除应力集中。

For the rational joint structure the moment should be reduced , and the stress concentration must be eliminated .

严格的入厂质量检验和定期消除应力回火是保证轧辊使用寿命的关键措施。

Strict factory entering examining and regular stress - relieving tempering are key precautions to ensure roll working life .

振动消除应力是消除构件残余应力，获得尺寸精度稳度性的一种工艺方法。

Vibration Stress Relief ( VSR ) is a method to obtain the dimensional stability for reducing residual stress .

尽量减少球罐的各种应力，消除应力可采用热处理或水压试验；

Reducing the stresses of spherical tank if possible ; and adopting heat treatment or hydrostatic test to relief stress ;

采用双面对称焊法和焊后消除应力处理是解决变形问题的有效方法。

Adopting symmetry welding method of double face and treatment after welding for reducing stress is good manner for remove deformation .