焊接性

从PC材料性能出发，探讨分析PC材料电度表壳体超声波焊的焊接性。

The weldability of polycarbonate by ultrasonic energy is studied according to the properties of PC material of meter mask .

中间层厚度对TiAl金属间化合物三体摩擦焊接性的影响

On the Effect of the Interlayer Thickness on the Three-Body Friction Weldability of TiAl

SiCp/LD2A1合金复合材料电弧焊的焊接性

Arc welding of SiC particle reinforced ld_2 A1 alloy matrix composite

Ti3Al-Nb基合金的焊接性研究进展

Advances in the Weldability Study of Ti_3Al-Nb Based Aluminides Alloys

快速化学液相沉积法制备抗氧化Cf/C复合材料及其焊接性研究

Study on the Fabrication of Oxidation Resistance C_f / C Composites by Rapid Chemical Liquid Deposition Techniques and Its Welding Properties

镀锌钢板的CO2激光焊焊接性

CO_2 laser-weldability of galvanized steel sheets

以裁焊板工业生产为背景，对汽车用镀锌钢板的CO2激光切割板坯的CO2激光焊焊接性进行了试验研究。

The CO_2 laser butt welding of galvanized steel sheets cut by the CO_2 laser was investigated for automotive manufacturing application .

铁路车辆用TCS耐蚀钢的焊接性研究

Research on the weldability of TCS corrosion resistant steel for railway wagon

镀层Fe含量的增多提高了镀层的焊接性和耐蚀性，但却降低了镀层的抗粉化性能。

The amount of the increased Fe in the coating improved the coating weldability and the corrosion resistance , but reduced the powdering resistance of the coating .

Al-Li合金的焊接性及其改进途径

Weldability and Improving Approach of Aluminium-Lithium Alloy

Cr-Mo钢的焊接性和回火脆性分析

Analysis of Weld Property and Temper Brittleness for Cr-Mo Steel

微合金非调质40MnV（Ti）钢焊接性研究

Weldability of the 40mnv ( ti ) microalloyed non-quenched and tempered steel

Cr3C2/Ni3Al表面耐磨堆焊材料的焊接性

Weldability of Cr_3C_2 / Ni_3Al hardfacing material

不锈钢A-TIG焊活性剂的焊接性研究

Study of weldability of activating flux for A-TIG welding of stainless steel

TiAl金属间化合物电子束焊接性较差，焊后接头极易产生冷裂纹。

The electron beam weldability of TiAl intermetallic compound is poor , and cold cracks easily occurred in the joints after welding .

具有优良耐蚀性、成形性和焊接性的无Pb、无Cr（VI）预涂层钢板已成为汽车燃油箱钢板发展的方向。

Pb-free and Cr ( IV ) - free prepainted steel sheet with excellent corrosion resistance , formability and weldability is the development direction of automotive fuel tank steel sheet .

C-Mn钢焊接性预测专家系统的设计和实现

Weldability prediction expert system of C-Mn steels

针对X80管线钢进行了焊接性分析，确定其预热温度。

The weldability of X80 pipeline steel was analyzed and its preheating temperature was determined .

Cr-Mo-V抗氢钢的焊接性

Weldability of Cr-Mo-V Hydrogen-proof Steel

分析认为，Cr3C2/Ni3Al复合材料具有良好焊接性的原因在于：（1）焊接过程中，Cr3C2发生溶解再析出，熔池中的C优先被氧化，保护了Al的氧化。

The good weldability is attributed to following factors : ( 1 ) Cr_3C_2 is dissolved during hardfacing . C precedes Al to be oxidized in melting pool thereby protects Al from oxidation severely .

T23（P23）钢的工艺焊接性评价

Assessment on procedure weldability of sa213t23 ( sa335p23 ) steel

采用三相次级整流点焊机和动态参数检测系统，研究了硬铝合金LY12直流点焊焊接性；

The weldability of alumimum & alloy 508 for DC spot welding is studied by use of DC spot welder and dynamic parameter testing system .

本文对TC4钛合金和钢异种金属焊接性的研究是以钛和钢的焊接性为基础的。

In this paper the weldability is analysed between TC4 titanium alloy and steel based on weldability of TC4 titanium alloy and steel .

通过向Al-Si合金中加入Cu、Zn、RE等合金元素，并采用超音速气体雾化技术制备快凝钎料粉末，目的是改善钎料的焊接性和焊接强度。

In order to improve the welding properties and welding strength of the brazing filler based Al-Si alloy , Cu , Zn and RE elements has been added and supersonic gas atomization technology has been used to prepare brazing filler powder .

从焊接性和焊接接头使用性能两个方面入手，结合焊接接头的硬度、拉伸和冲击韧度的测试，对X80管线钢的焊接性能进行了试验分析。

The mechanical properties and weldabilities of X80 pipeline steel were investigated by testing hardness , tensile strength and impact toughness in this paper .

D36低合金高强钢焊接性研究A36、DH36控轧控冷取代正火工艺生产实践

Weldability of D 36 HSLA steel

HQ-60钢焊接性研究

Investigation of weldability for HQ-60 steel

对1Cr18Ni9Ti不锈钢焊接性进行了分析。

Cr 18 Ni 9 Ti is the better material of equipment . The 1 Cr 18 Ni 9 Ti stainless steel weldability was analysed .

综述了T91钢的发展、焊接性及焊接工艺，为从事焊接的工程技术人员提供选材，制定合理焊接工艺。

This paper summarized the development , weldability and welding technology of T91 steel , in order to provide the engineers references and to set down an available welding technology .

研究了重型吊车梁用D36低合金高强钢的焊接性。

The paper investigates the weldability of D36 HSLA steel used for heavy crane beams .