绞刀

jiǎo dāo
  • Cutterhead;rimer;drift
绞刀绞刀
绞刀 [jiǎo dāo]
  • [drift] 见整孔拉刀

绞刀[jiǎo dāo]
  1. 基于二维切削理论的绞刀切削载荷计算及绞刀应力状态的ANSYS分析

    Cutting Force Calculation Based on 2-D Soil-Cutting Theory and the Stress Analysis of Cutterhead by ANSYS

  2. 最后,在理论和实际研究的指导下,采用VISUALBASIC程序语言,编制了独立的绞吸挖泥船绞刀切削岩石受力计算软件,为今后进一步的研究和实际应用提供了便利。

    In the end , based on the theoretical and practical research , independent software were programmed using Visual Basic language , which would facilitate further study and practical application in future .

  3. 在Pro/E软件中对真空挤出机分体式螺旋绞刀进行建模,并且对其进行装配,然后将装配模型导入到Workbench软件之中。

    Modeling the vacuum extruder split spiral reamer in Pro / E software , and assembly , the assembly model is then imported into the Workbench software .

  4. 本文围绕疏浚实验平台开发,研究了如下三项重要内容:基于Pro/E的绞刀三维造型、土壤切削实验监控系统、实验系统的调试运行。

    The main contents of this paper related to the development of dredging experimental platform are as follows : the cutterhead three-dimensional solid modeling based on Pro / E , the supervisory control system of soil-cutting experiment and the debugging operation of the experimental system .

  5. 连续混捏机绞刀的磨损及修复

    Reamer Worn of Continuous Mix and Pinch Machine and the Restoration

  6. 介绍了自主研发的三维地形与疏浚绞刀仿真系统。

    The independent-developed3D simulation system for terrain and cutterhead was introduced .

  7. 大型绞吸式挖泥船绞刀轴校中与振动计算分析研究

    Cutter Suction Dredger Shaft Alignment and Vibration Calculating Analysis and Research

  8. 挖泥船绞刀深度实时测量系统的研究

    The Study on Real-time System for Depth Measurement of Dredger Cutter

  9. 对真空挤出机整体式螺旋绞刀的有限元分析。

    Finite element analysis of the vacuum extruder overall spiral reamer .

  10. 绞刀轴使用及维修中的几个问题

    Some Problems of Use and Repair of Extruder 's Worm-axle

  11. 连续螺旋绞刀参数对挤出过程中泥料特性的影响

    Effect of continuous screw reamer parameters on Pug characteristics of extrusion process

  12. 绞刀片大角度切削水饱和沙的力学模型

    Mechanical Model of Water Saturated Sand Cutting at Blade Large Cutting Angles

  13. 环保疏浚的技术要求与环保绞刀的设计

    Technical demands of environmental protection dredging and design of environmental protection cutters

  14. 真空挤砖机螺旋绞刀的冷拉成形

    Cold - draw shape for screw auger of vacuum extruder

  15. 一种三维地形与疏浚绞刀虚拟生成方法

    A Kind of Virtual Implementation Method of Terrain and Cutterhead

  16. 绞吸式挖泥船箱型绞刀架的设计

    The Design of Box Ladder for Suction Cutter Dredger

  17. 动力髋螺钉三联绞刀大转子下扩孔病灶清除植骨治疗股骨头颈部囊性变1例

    Dynamic hip screw triple reaming for clearence of femoral head and neck cystic lesion

  18. 基于有限元方法的真空练泥机螺旋绞刀结构参数研究

    Study on the Structure Parameter of De-Airing Pug Mill Screw Based on Finite Element Method

  19. 绞刀电动机拖动系统。

    Model of cutter driver system .

  20. 金属模铸造螺旋绞刀的研制与应用

    Casting Spiral Worm-spade With Metallic Mould

  21. 附有绞刀装置的给水泵

    Influent pump with cutter device

  22. 挖泥船绞刀设计

    Design of Cutters for Dredgers

  23. 疏浚实验平台开发&绞刀三维造型及土壤切削实验监控系统

    The Design and Manufacture of Dredging Stand : 3-D Modeling of Cutterhead and the Monitoring System of Soil-Cutting Tests

  24. 为螺旋绞刀的相关设计以及改良指出了方法,降低了设计周期,节约了制造成本。

    As the methods of spiral reamer design and improved , reducing the design cycle , saving manufacturing costs .

  25. 绞吸挖泥船是利用绞刀松动泥土,使之与水混合,而后用泥泵将泥浆泵出的挖泥船。

    Cutter-suction dredger looses the soil to mix with the water by cutter , and pumps the mud by dredge pump .

  26. 绞吸式挖泥船是一种常用的疏浚设备,绞刀是其挖掘水下泥土的核心部件。

    Cutter suction dredger Dredging is a Dredging tool which is commonly used , Cutter is the core component when it works .

  27. 在对各个接触面进行了相关的设置之后,然后进行有限元分析并计算出出螺旋绞刀的应力及变形情况。

    After the settings on each contact surface , and then the finite element analysis and calculate the the spiral reamer stress and deformation .

  28. 而挤出机螺旋绞刀前端的副叶片折断的现象时有发生,这严重影响了砖瓦真空挤出机的挤出质量和生产效率。

    Deputy leaves of extruder spiral reamer broken phenomenon often occur , it has a serious impact on the quality and production efficiency of brick vacuum extruders .

  29. 标准及非标准车刀、铣刀、绞刀、钻头、丝攻、丝板、拉刀、滚齿刀、锉刀及深孔钻;

    Standard and non-standard turning tool , milling cutter , reamer , drill , tap , die , broach , gear hobber , file and deep-hole drill ;

  30. 前端绞刀中用于固定绞刀叶片的锥套的轴向后部留有一段空位、主绞刀叶片起端至第二绞刀叶片末端间留有一段周向距离;

    Balance blades of the front end of the reamer are one quarter to three quarters of the pitch , and are made into a double-ended spiral .