自润滑
- self-lubricating
-
Al2O3/TiC/CaF2自润滑陶瓷材料的研究
Study on Self-lubricating Al_2O_3 / TiC / CaF_2 Ceramic Composites
-
Ni基合金-石墨自润滑材料的熔炼组织及性能
The melting microstructure and properties of Ni-graphite self-lubricating alloys
-
固体自润滑材料在EAST超导托卡马克中的应用
The Research of Solid Self-lubricant Material Used in EAST Superconducting Tokamak
-
SiC及其复相陶瓷高温自润滑特性的研究
Study on self-lubrication at elevated temperature of SiC and Its Composites
-
NiCuC合金的自润滑性能随石墨含量的提高及球化而得到改善;
The self-lubricating properties of Ni-Cu-C alloy increase with the increasing of graphite content and spheroidization .
-
悬停状态下直升机尾桨/尾梁耦合动力稳定性分析加工自润滑复合材料尾桨齿轮都会挺身而出最具侵略性3D飞行。
The machined self lubricating composite tail rotor gears will stand up to the most aggressive 3D flying .
-
利用ANSYS有限元法对铜/塑自润滑滑块进行了结构优化。
The structure of brass-plastics self-lubricating composites was optimized with the ANSYS finite element method .
-
利用ANSYS有限元软件对重载自润滑复合材料进行设计,通过摩擦磨损实验测定了其摩擦磨损曲线。
The self-lubricating composite was designed by using the ANSYS finite element method at high loads .
-
PTFE/7075铝合金镶嵌型自润滑材料的摩擦学行为
Tribological Behavior of PTFE / 7075 Aluminium Alloy Embedded Self-lubricating Composite
-
PTFE基自润滑复合材料的干摩擦学特性
The tribological properties of PTFE-based self - lubricating composites under dry friction
-
激光熔覆Al2O3/CaF2陶瓷基高温自润滑耐磨复合材料涂层组织与耐磨性研究
Microstructure and Tribological Properties of Laser Clad CaF_2 / Al_2O_3 Self - lubrication Wear - resistant Ceramic Matrix Composite Coatings
-
填充MC尼龙自润滑材料及其应用的研究
Filled MC Nylon Self-lubricating Material and Application
-
几种PTFE基自润滑复合材料轴承在油润滑条件下的摩擦学特性
The Tribological Properties of Several Kinds of PTFE-Based Self-Lubricating Composite Bearings under Oil Lubrication
-
POM基MoS2自润滑复合材料的真空摩擦学特性研究
Tribological properties of POM-based self-lubrication composites with MoS_2 in vacuum
-
材料转移层对Al2O3基自润滑陶瓷/铸铁摩擦副摩擦的影响研究
Effects of Transfer Layer on the Tribological Characteristics of the Al_2O_3-based Self-lubricating Composites / HT_ ( 20-40 ) Cast Iron Pairs
-
BN含量对BN/Ni(Cr)自润滑材料力学及摩损性能的影响
Effect of BN on mechanical and tribological properties of BN / Ni ( Cr ) self-lubricating composites
-
采用熔炼法制备出新型NiCuC固体自润滑材料,研究了稀土镁球化剂对NiCuC合金中石墨的球化作用。
The Ni-Cu-C solid self-lubricating materials were prepared by melting method and the spheroidization effect of rare earth magnesium on graphite of Ni-Cu-C was studied .
-
VM型氦致冷机高温段自润滑导向环材料的研究
Study on Self-lubricating Materials for Guiding Rings in the High Temperature Portion of VM Helium Cryogenerator
-
组元间化学相容、物理匹配对Al2O3基自润滑复相陶瓷磨擦学性能的影响
The Influence of Chemical Compatibility , Physical Match between Solid Lubricants and Matrix upon the Tribological Properties of Al_2O_3 - based Self-lubricating Materials
-
CFRP自润滑轴承的研制
Development of CFRP Self-lubricating Bearing
-
非连续Cf/Cu复合材料的电导热导率高,具有自润滑和抗电弧侵蚀等特殊性能,是一类具有广阔应用前景的功能复合材料。
Discontinuous Cf / Cu composite , with its peculiar properties of high electrical-conductivity , high thermal-conductivity , self-lubricating , resisting electric-arc erosion and so on , is a prospectively functional composite .
-
PTFE钢基铜塑自润滑复合材料的加工工艺优化与性能研究
Optimization to Process Technique for PTFE Copper-Plastic Self-Lubricating Compound Material with Steel Base and Study to Its Property
-
TX镶嵌式自润滑复合材料的研究与应用
Study and Application of TX Inlay Type of Self-lubricating Composite
-
PTFE与Ni、P合金共沉积,降低了镀层的摩擦系数及磨损率,增强了镀层的减摩、自润滑性能。
PTFE together with Ni , P alloy deposition , reducing the coefficient of friction and wear of coating enhances the friction-reducing , self-lubricating coating performance .
-
聚四氟乙烯(PTFE)是一种综合性能优良的自润滑材料,在减摩部件中获得广泛应用。
Polytetrafluoroethylene ( PTFE ) is a self-lubricating material with excellent comprehensive performance , widely used in frictional parts .
-
SiC和SiC-WC复相陶瓷高温自润滑特性及其机理
Self-lubrication properties at elevated temperatures and mechanism of SiC and SiC-WC Composites
-
详细介绍了有机高分子聚合物聚四氟乙烯(PTFE)的结构特点及它作为自润滑减磨材料的原理。
Structure of organic macromolecule polymer Teflon ( PTFE ) and theory of its self-lubricating and friction reduction were described in detail .
-
二硫化钼添加方式对Ni-Cr基高温自润滑材料性能的影响
Effects of Different Ways of Adding MoS_2 on the Performance of Ni-Cr Base High-temperature Self-lubricating Alloys
-
基于DYNAFORM的自润滑轴套卷制成形的数值模拟
Numerical Simulation on Wrapping of Self-Lubrication Bearing Bush Based on DYNAFORM
-
聚四氟乙烯(PTFE)以极低的摩擦系数、优异的热稳定性和耐腐蚀性著称,是一种理想的自润滑材料。
Polytetrafluoroethylene ( PTFE ) is an ideal self-lubricating material which has very low friction coefficient , high thermal stability and chemical stability .