成材率

  • 网络yield;Material yield
成材率成材率
  1. 热穿孔工艺试验表明,C方案的热穿孔成材率最高。

    The experimental hot-piercing operation shows that Option C resulted in the highest hot-piercing process yield .

  2. 采用光电编码器、高速计数模板、PLC程序控制方案实现钢板的定位剪切,提高了中板成材率。

    By using encoder , high speed counter module and PLC sequencing control in steel plate positioning shearing , medium plate yield have been increased .

  3. 用RBF神经网络预报冷轧精整机组的成材率

    Predicting the Productivity of a Cold Rolling Sizing Unit by the RBF Neural Network

  4. 电炉CSP流程综合成材率分析

    An analysis of the finished product rate of CSP process with arc furnace

  5. MES系统实施后,将有效地提高生产效率和成材率,促进企业的信息化进程。

    MES will improve produce efficiency , rate , and the enterprise 's information process will be promoted after actualization .

  6. 分析了某冷轧厂的发货预报系统,并利用改进RBF(Radialbasisfunction)神经网络学习算法建立了该系统中精整机组成材率的预报模型。

    First in this paper , the goods delivery prediction system of a steel factory is analyzed . Then a model for predicting the productivity of a cold rolling sizing unit is designed through the improved training algorithm of the radial basis function neural network .

  7. 并与传统的厚板流程进行了对比分析,表明采用CSP工艺生产的电工钢具有铸态与热轧态晶粒组织细小、温度加热均匀、板形易于控制、成材率高等优势。

    In comparison with traditional process , CSP process has advantages of finer grain size , at cast and rolled state , homogeneous heating , controlling shape with ease and high production yield .

  8. 其掺杂钼条的合格率达99%,掺杂钼丝成材率达88%,年生产掺杂钼丝近20T

    The rate of eligible doped molybdenum strip reach 99 % , and eligible doped molybdenum wire reach 88 % . The manufactory can yield 20T doped molybdenum wire annually

  9. 为减少轧制中钢板的切边、切头尾量,提高钢板的成材率,利用厚板展宽轧制法(MAS)对轧制过程中钢板的平面形状控制进行了试验研究。

    In order to reduce the plate loss of side and end cutting , to increase the finishing product rate , the test research of the plan view control of the MAS ( Mizushima automatic plan view pattern control system ) method was completed .

  10. 优化4145H锭型,提高定尺材成材率棒材连轧生产线提高带肋钢筋成材率实践

    Optimization of Ingot Type of Steel 4145H to Increase the Yield of Fixed Length Product Practice of Raising Productivity of Ribbed Bar in Bar Production Line

  11. 轧机生产的实际数据证明具有板形好,尺寸精度高,压下量大,道次少,成材率高和节能等优点,可轧制带钢尺寸为0.2~3.0×300~520mm。

    Good shape high precision of size , heavy reduction , reduction of pass number , high yield and good energy saving are proved by production data of the mill . Strip thickness and width is 0.2 ~ 3 × 300 ~ 520mm .

  12. 第二、运动员成材率低。

    Secondly , the proportion of becoming successful athletes is low .

  13. 提高宽厚板产品成材率措施分析

    Analysis on Measures Increasing Rolling Yield of Wide Heavy Steel Plate

  14. 提高中厚板成材率的平面形状控制技术

    Plan view pattern control techniques for increasing yield in plate rolling

  15. 提高热轧带肋钢筋成材率的工艺优化与改进

    Process Optimizing for Increasing Yield of Hot Rolled Ribbed Steel Bar

  16. 棒材连轧生产线提高带肋钢筋成材率实践

    Practice of Raising Productivity of Ribbed Bar in Bar Production Line

  17. 石材的爆破内伤及其对成材率的影响

    Blasting internal crack and its influence on rock plank ratio

  18. 使综合成材率提高了25%左右。

    The comprehensive yield of product increased by 25 % .

  19. 坯料设计在提高中厚板成材率中的应用

    The Application of slab design for improving yield of plate

  20. 现代化宽厚板厂高成材率确保技术

    Techniques for High Rolling Yield in a Modernized Wide Heavy Plate Mill

  21. 利用平面板形控制提高厚板的成材率

    Increase Plate Yield with the Methods of Controlling Plate Shape

  22. 中板成材率影响因素及其对成本的影响分析

    Influence factors on yield and coast during plate rolling

  23. 因此,在进行钢锭模设计时,应综合考虑钢锭的质量和成材率。

    Therefore , both quality of steel ingot and yield are considered synthetically .

  24. 提高轧钢成材率的途径

    Ways to increase the yields of rolled steel products

  25. 轧钢操作对中板成材率的影响

    Influence of rolling operation on Yield in plate works

  26. 唐钢高速线材厂提高成材率的措施

    Measures for improving the rolling yield of rod wires in Tangshan Steel Company

  27. 成材率的高低直接影响着企业的生产成本。

    The finished product ratio influences the cost directly .

  28. 厚板轧制工艺参数对成材率的影响

    Effect of Rolling Parameters on Yield of Heavy Plate

  29. 优化冷轧板产品生产工艺提高成材率

    Optimization of production process of Cold Rolled Strip Product Enhancement of Rolling Yield

  30. 采用该工艺可提高钢管生产率和成材率。

    The process makes it possible to increase steel pipe productivity and yield .