水闸
- sluice;dam;water gate;penstock;water lock
-
[sluice;water gate] 装有阀门或闸门以阻止或调节水流的人工过水通道
-
临城矿安全通道水闸门施工技术
Construction technique about safety channel water gate in Lincheng Coal Mine
-
分布式计算机网络在水闸控制系统中的应用
Application of Distributed Computer Network in Water Gate Control System
-
运河上捕鱼的最佳地点是靠近水闸的地方。
The best place to catch fish on a canal is close to a lock
-
基于Internet的双吊点水闸液压启闭机远程监控系统研究
Study on the Remote Monitoring and Control System for Double-suspension Sluice Hydraulic Hoist Based on Internet
-
水闸钢筋CAD系统的分析与设计
The analysis and design of the sluice steel bar reinforcement computer aided design
-
PLC系统功能在水闸工程中的优化配置与实施
Optimized Distribution and Application of PLC System Function in the Sluice Project
-
用户可以通过标准Windows风格的界面对话框进行水闸设计。
Engineers can design sluice through interfacial dialog boxes with standard style of Windows .
-
水闸CAD模块的设计与研制
Sluice CAD Module 's Design and Development
-
基于VB和PLC的水闸液压启闭机控制系统设计
System Design of the Headstock Gear with Hydraulic Pressure of Sluice Based on VB and PLC
-
基于Modbus通信协议的水闸计算机监控系统
Computer Monitoring System for Sluice Based on Modbus Protocol
-
结合开敞式水闸设计CAD系统(水工部分)的研究与开发,对C语言与VISUALBASIC混合编程进行了探讨,并实现了C语言与VISUALBASIC的混合编程。
Combining with studying and developing CAD system for open sluice designing , the mixed language programming with C language and Visual Basic is discussed , and it is carried out successfully .
-
对传统水闸液压启闭机控制系统进行了改进,提出了1种基于VB和PLC技术相结合的计算机控制方案。
The traditional headstock gear control system with hydraulic pressure of sluice is improved , a kind of control scheme based on VB and PLC is given .
-
在分析DS水闸枢纽工程各种施工进度风险基础上,运用改进的基于R值优先的集对分析风险排序方法对施工进度风险进行了评估;
It then analyzes most construction-schedule risks of DS WKP and establishes ameliorated R-precedence risk sequencing method based on SPA which is used in risk assessment of DS WKP .
-
介绍了CFC(水泥粉煤灰碎石)桩在西南水闸基础处理方案中的设计。
This paper introduces the design of CFG piles in the handling scheme for southwest sluice foundation .
-
在上述研究基础上,制定了具体的风险应对工程措施和非工程措施,有效控制了DS水闸枢纽工程进度风险。
Based on the researches above , the detailed engineering measure and non-engineering measure for risk handling is designed to control construction-schedule risk of DS WKP effectively .
-
其次,在阐述水闸的设计和计算方法的基础上,将水闸结构设计的常规方法和用有限元软件ANSYS方法进行了研究,得出了一些结论和建议。
Second , after the methods of design and calculation of sluice was expounded , the study between normal methods and ANSYS method in designing sluice chamber . Some significant conclusions and advices were recommended .
-
论文将进度预警模型应用于DS水闸枢纽工程,给出了进度点的警情值,从而为风险应对提供了理论依据。
The dissertation also applies schedule early-warning model to the DS waterlocks key project , gives the sign value of schedule points , provides risk handling with theory foundation accordingly .
-
通过工程实例,建立了水闸极限状态功能函数,运用Monte-carlo法求得对应的可靠性指标与失效概率;
Through the project example , the limit state equation of the floodgate was established , the failure probability and reliability index are obtained by the method of Monte-carlo .
-
运用ANSYS接触分析对水闸整体和局部结构进行了分析研究,包括防渗墙的结构计算和水闸的沉降分析,为水闸和水闸防渗体系有效运行提供保证。
The Whole and part structure study of the sluice including the settlement of the sluice and the cut & off wall is studied by adopting surface-to-surface contact analysis in ANSYS to assure it run safely .
-
PedroMiguel断裂带穿过巴拿马运河的两个水闸,该运河正在进行一场大型拓宽工程。
The Pedro Miguel fault runs between two of the locks on the Panama Canal , which is undergoing a major widening project .
-
研究了水闸有限元仿真分析理论和方法,及ANSYS软件中水闸仿真分析的仿真模型建立和实施技术,对水闸施工顺序的模拟进行研究。
The theory and method of sluice FEM simulation analysis and the simulation modeling in simulation analysis and the technique of actualize in ANSYS are researched . The simulation modeling of actually loading in process of sluice construction is actualized .
-
以西南水闸的动力学问题为背景,考虑水体对闸门自振特性的影响,应用ANSYS软件对大跨度平面闸门的自振特性进行了详细的分析研究。
In this paper , the software ANSYS is applied to study in detail the self-vibration characteristics of long-span plane gate with consideration of the effect of fluid-structure coupling against the background of sluices dynamic problems in the southwestern China .
-
介绍了Modbus通信协议的技术特点,以水闸枢纽工程为例,详细地阐述了闸门群集散式计算机监控系统的软硬件组成和实现。
This paper introduces technical features of Modbus communication protocol . Taking a multipurpose sluice project for example , it interprets hardware composing & software developing of distributed computer monitoring system of the sluices .
-
通过与Prandtl解对比说明了用理想弹塑性有限元进行水闸地基稳定分析是可行的,并对一般荷载作用下的闸基稳定进行了分析。
Through contrasting with Prandtl answer the paper has explained that the ideal elastic - plastic FEM to analyzing stability of the sluice foundation can be applied , and has analyzed the foundation stability of sluice under general load .
-
平底板水闸闸孔淹没出流的判别和流量计算
The submerged limit determination and the discharge calculation of flat lock
-
基于直接积分法的水闸稳定可靠度分析
Analysis of stable reliability for sluice based on direct numerical integration
-
浮式叠梁检修闸门在七和水闸的应用
Application of Overhaul Penstock of Floating Composite Beam in Qihe Penstock
-
大型船闸和水闸底板设计和施工中的几个问题
Some Problems in the design and Construction of Large-size Lock Floor
-
大型水闸深厚软弱地基处理方案初探
Discussion on treatment scheme of thick soft foundation for large gate
-
水从水闸中源源不断的涌出。
Out of the sluice springs an exhaustible supply of water .