镀锌板

锌层对深冲镀锌板r值的影响

The Effect of Coat on the r Value of Galvanized Sheets

CO2激光焊接汽车镀锌板的试验研究

Experimental Study on CO_2 Laser Welding of Galvanized Sheet of Vehicle

合金化热镀锌板短路过渡CO2焊冶金现象研究

Metallurgical Behavior of alloying galvanized plate welded with co_2 short circuiting arc

不同光斑模式的CO2激光在镀锌板钎焊连接中的应用

CO_2 laser brazing galvanized steel sheets with different spot modes

热镀锌板生产线上CPC系统常见的问题及对策

Common problems of CPC system on hot dip galvanized steel sheets line and the solutions

CSP板卷及冷轧镀锌板表面缺陷分析

Surface Defects of CSP Strip , Sheets From Cold Rolled and Galvanized Strip

ICP-AES法测定镀锌板中镀层的铅和镉

Determination of Pb and Cd in the Coating of the Zinc-Coated Steel Sheets by ICP-AES

风机蜗壳材料采用0.8-1.5mm优质镀锌板，使用风机专业CAD辅助设计，线形流畅、结构合理，使风机噪音降到最低。

The volute material of the fan adopts high-quality galvanized sheet of0.8-1.5mm and fan professional CAD aided design with the fluent streamline and rational construction assuring the lowest noise .

试验结果表明：镀锌板SGCC的TIG拼焊质量良好。

The test results suggested that the galvanized sheet SGCC welding quality was good .

汽车用热镀锌板Fe-Al合金层的研究

Study on Fe - Al Alloy Layer in Hot - Dipping Galvanized Steel Sheet for Cars

汽车用热镀锌板Fe-Al过渡层相结合能的计算

Calculating of Cohesive Energy of Fe Al Transition Layer of Hot Dipping Galvanized Steel Sheet for Cars

退火工艺对Ti-IF钢合金化热镀锌板微观组织织构的影响

Effect of annealing process on microstructure and texture of alloying hot dip galvanized Ti-IF sheet

在大量搜集现场生产数据的基础上，用BP神经网络算法建立了各种工艺参数对热镀锌板力学性能影响的数学模型。

Based on collected production data , a predictive model to express the relationship between the mechanical properties of hot dip galvanized sheet and varied technological parameters has been developed by means of BP artificial neural network algorithm .

熔敷TiC涂层提高了电极寿命原因是电极表面熔敷TiC涂层能阻碍电极与镀锌板之间的局部焊接以及减缓电极表面的合金化。

The depositions of TiC extending the electrode life is because that the depositions of TiC layer can decrease local welding with the substrate and the galvanized layer of the sheets and slower the alloying speed of electrode tip .

因此本文提出了一种梯度锐化技术与Sobel算子相结合形成混合边缘检测算法处理镀锌板表面缺陷的数字图像。

Therefore , in this paper the digital image of the surface defects of the galvanized sheet was deposed by a gradient sharpen combining with Sobel operator forming mixed edge examination .

与线性回归模型的比较表明，BP算法的预测误差小于线性回归模型，可用于预测热镀锌板的力学性能，有实用性和推广价值。

As compared with the model of multi-variant linear regression , the BP model is smaller in error values of σ 0.2 and σ b . Therefore , the model can be used to predict the mechanical properties of hot dip galvanized sheet and is suitable to extend .

研究了再结晶退火温度、退火时间对Ti-IF钢合金化热镀锌板的钢基组织织构及析出相的影响。

The effect of recrystallization annealing temperature and annealing time on the microstructure and precipitation phase of alloying hot dip galvanized sheet are investigated in this paper .

通过试验分析了不同的光整工艺对热镀锌板屈服强度、n值和表面质量的影响，由此提出了CQ、DQ级低碳铝镇静钢和IF钢优化的光整工艺。

The influence of skin pass process on yield strength , n value and surface quality of hot-dipped galvanized sheet steel were analyzed by experiments . Meanwhile , the optimized skin pass processes for CQ , DQ and IF steel were obtained .

结合本钢现有生产技术装备水平，阐述了EDDQ特深冲热镀锌板的生产工艺特点，分析了所采用的工艺制度对产品性能的影响，总结了本钢特深冲热镀锌板的开发研制过程。

In this article we analyze the characteristic of producing process of EDDQ hot dip galvanizing strip and its effects on the product properties , summarize the progress of the new product development of EDDQ hot dip galvanizing strip of BX Steel .

汽车用合金化热镀锌板镀层剥离行为的分析

Peeling Behavior of Hot-Dipped Galvanizing Alloying Coating on Automobile Steel Sheets

镀锌板风管严密性的改进与提高措施

Measures to improve the tightness of air-duct made of galvanized sheet

薄规格产品生产技术薄规格镀锌板的生产

Improvement of Thin Gauge Rolling Technology Production of light-gauge galvanized strips

抓住机遇加快我国镀锌板的发展

Grasp the opportunity and speed up the development of galvanized sheet

汽车用热镀锌板镀层结构

Investigation on Coating Structure of Hot-Dip Galvanized Steel Sheet for Cars

高耐蚀性热镀锌板的钝化处理工艺探讨

Passivation technology for high corrosion resistance of hot-dip galvanized strip

热镀锌板镀层表面锌花均匀性研究

Study with Spangles Homogeneity on Plating Surface of Hot Galvanized Steel Sheet

镀锌板激光钎焊温度场的数值模拟

Temperature filed simulation of laser brazing for galvanized steel sheets

镀锌板的激光剪裁拼焊工艺及接头性能研究

Study on laser tailored welding technology and joint of zinc-coated steel plate

镀锌板填丝激光钎焊工艺的初探

Study on laser brazing of zinc - coated steel with filler wire

防酸性气体腐蚀面层汽车用合金化热镀锌板镀层缺陷及其防止措施

Coating default on hot-dip galvannealed sheet for automobile and its preventive measures