内衬层

介绍内衬层胶片压延生产线电气控制系统的改造情况，改造后的内衬层胶片压延卷取实现了无张力控制，保证了内衬层胶片的质量。

Introduces the modification of the electric control system of inner liner calendering line , realizing the non-tension control after the modification of inner liner calendering winding up unit , guaranteed the quality of inner liner .

内衬层生产线中浮杆对胶片张力控制的研究

Study on tensility control of film by floating pole of the inner liner product line

SIMPLEX纠偏系统在轮胎内衬层复合生产中的应用

Application of the SIMPLEX correct system in tyre underlayer complex-production

陶瓷内衬层钢管的离心SHS法生产

SHS centrifuging process for manufacture of ceramic - internal - lined steel tube

SPI盔甲的内衬层膨胀了，吸饱了水，把他向下坠。

The lining of his SPI armor swelled , taking on water , weighing him down .

MPM芯棒限动控制系统轮胎内衬层生产线连动控制系统的实现

Research and design of connecting move control system for tyre underlayer product line

用于连接不同内衬层，不同口径的管道。

Used to connect piping of different lining , different dimensions .

复合钢管中陶瓷内衬层的研究

Investigation on ceramic - lined layers in composite steel pipes

FRP/塑料复合管道内衬层加工技术

Machining Technique of FRP / Plastics Composite Pipe Inside Floor

辊筒机头内衬层挤出法生产设备研制的技术关键

Key Technology on Study of inner Liner Extrusion Production Equipment with Roller Head

内衬层胶片压延卷取中的无张力控制

Non-tension Control of Inner liner winding up

浅析轮胎内衬层产生气泡的原因及解决措施

Analysis on the Causes for the Occurrence of Bubble in Tyre Liner and its Solutions

中田工程公司内衬层挤出生产线

Inner Liner Extrusion Line

玻璃钢管道由耐腐蚀防渗漏的内衬层、强度层和外表面层组成。

FRP piping is composed of the anti-corrosive and anti-leaky lining , the reinforced layer and Surface layer .

该设备适用于生产卡车、大客车和轿车的无气泡有型内衬层。

This is ideal for producing air porosity free Profiled Inner Liner for Truck , Bus and Passenger Tires .

内衬层、盲板层及第一强度层板焊趾处发生局部屈服。

Local yield zone occurred at the weld toe of the liner , the annulus and the first strength layer .

本文介绍了手糊成型玻璃钢圆柱形容器的结构设计，并对内衬层成型工艺提出了改进方法。

The structure design of cylindrical tank with hand lay-up process were introduced , the improved method of liner forming process were provided .

所生产的钢塑复合管道其内衬层与钢管基体贴合好、使用寿命长。

The bond between inner plastic lining and steel tube base metal of that steel plastic clad tube is good , and the service life is long .

隔离绝缘层和外护层以及内衬层，以防它们之间相互粘结而影响电缆的机械、物理、电性能等。

To separate the insulation , sheath and inner covering , and keep them from bonding and affecting the mechanical , physical and electrical properties of the cable .

一次性使用的膨化食品盒，由基体、内衬层和外衬层构成。

The utility model relates to a disposable puffed food case , which is composed of a basal body , an inner lining layer , and an outer lining layer .

在内压力和温度共同作用下时，应力重新分布，内衬层的应力得到缓解，应力最集中的部位仍是层间隙焊趾处。

Under both operation pressure and temperature , the stresses redistributed , and the inner layer stress state relieved , but the weld toe was still the most stress concentrated area .

通过对玻璃钢高压透声容器制作实例的研究，进行了结构设计，确定了内衬层和结构层的成型工艺，即手糊玻璃钢内衬防渗层后，在一定的缠绕规律下缠绕成型结构层；

In the light of the manufacture example , the structure is designed and the process for the liner and structure is optimized to choose the hand-lay for the former and winding for the latter .

对内衬层和胎体层，改变传统设计中厚度在成品断面图中均匀分布的假设，分别计算各段的厚度，使施工设计精度得到提高；

For inner linear and carcass ply , the precision of construction design is improved by changing the assumption that the thickness is evenly distributed in the profile of finished product and calculating the thickness in various segments separately ;

重力分离SHS法内衬陶瓷层中裂纹形成机理的研究

Cracks Formation Mechanism in Lined ceramics Produced by Gravitational Separation SHS Method

论述了离心法和重力分析法2种复合管制造方法，并从提高陶瓷层致密度、韧性、表面质量及降低裂纹率等方面，综述了提高SHS复合管内衬陶瓷层性能的措施。

The measures to improving the performance of the ceramic layer of SHS composite pipe wear described from the aspects of the compactness , toughness , surface quality and decreasing crackle ratio in the ceramic layer .

托盘纸箱装，箱内衬一层塑料薄膜，包装完好。

Packed in Plastic Woven Flexible Container , Lined with Plastic Film Bags , Shipped in Container , 20Bags for Each .

颞下颌关节是滑膜关节。颞下颌关节滑膜覆盖着关节囊的关节腔面，它由两层组织构成，第一层为贴近关节腔的内衬细胞层，称为滑膜内膜；

TMJ is synovial joint , of which synovial membrane covers surface of joint cavity , and consists of two layers of soft tissue .

2例为融合性囊肿，囊液呈浆液状，囊壁内衬数层细胞；

Two cases were classified as coalescence PTCs with serous cyst fluid and more than one cell layer thick of the cyst wall lining cells ;

研究表明，内衬陶瓷层中主要分布着由压应力场所造成的径向裂纹和因热应力场所引起的网状裂纹；

It is found that in lined ceramic the radial cracks is caused by compressive stress field and net cracks caused by heat stress field .

结果表明：SUS304L不锈钢在此条件下经720h的浸泡，未发生应力腐蚀开裂现象，设备泵用SUS304L不锈钢作为内衬复合层是安全的。

The re - sults showed that no stress corrosion cracking phenomenon occurred after immersing SUS 304L stainless steel in NaOH solution for 720 h , which proved it safety to use SUS 304L stainless steel as internal lining composite .