大板

大板大板
  1. 大型电站锅炉大板梁CAD系统

    Sheet Bridge CAD System in Large Power Boiler

  2. 运用定量解释方法剖析磁异常&以大板金矿区C6磁异常为例

    THE APPLICATION OF QUANTITATIVE INTERPRETATION IN MAGNETIC ANOMALY ANALYSIS : A case study of the C_6 magnetic anomaly in Daban gold field

  3. 采用X射线衍射技术,对膨胀型防火涂料经过大板燃烧后所形成的炭质层的物相结构进行了系统研究。

    By X ray diffraction technology , phase structure of carbonaceous char being formed in the process of combustion of intumescent coating has been studied systematically .

  4. 运动负荷下粘弹性Kelvin地基上无限大板的稳态响应

    Steady Response of Infinite Plate on Viscoelastic Kelvin Foundation to Moving Load

  5. GBF大板结构与传统大板结构的比较

    Comparison of GBF Large Panel Structure and Traditional Large Panel Structure

  6. VAI大板坯连铸机水平段频繁损坏分析及改造措施

    The analysis and Countermeasures of frequent damage of VAI slab caster horizontal segments

  7. 电解二氧化锰(EMD)用波纹状Ti-Mn复合阳极由波纹状Ti基Ti-Mn合金复合阳极大板、Ti加强筋及铝横担组成。

    The composite anode for production of electrolytic manganese dioxide ( EMD ) consists of Ti base corrugated panel covered with Ti-Mn alloys , Ti stiffening bars and Al hanger bar .

  8. 超临界600MW锅炉大板梁吊装方案分析

    The Analysis of Large Girder Hoisting Program for 600 MW Supercritical Boiler

  9. 纽约证交所大板显示该工业指数下降20点,nasdaq综合实际增加三点。

    The New York Stock Exchange Big Board shows that the Dow Industrials slipped twenty points , the NASDAQ Composite actually added three points .

  10. 300MW锅炉吊装机械的选择布置及大板梁吊装方法探讨

    Domestically Produced 300 MW CFB Boiler Hoisting Machinery Choice Arrangement and Board Roof Hoisting Method Discussion

  11. 利用复Fourier级数的卷积及广义函数论,推导出圆孔无限大板在边界弯曲时对应于常见3种孔边界条件的挠度解析公式。

    By means of the convolution of the complex Fourier Series and the generalized functions , the deflection analytical formulas are produced for the infinite plates with a unit circle under the boundary loads and the three common conditions at the unit circle edge .

  12. 1000MW机组锅炉大板梁的吊装

    1000 MW Unit Boiler Girder-beam Hoisting

  13. 组织观察表明,采用上述工艺可以明显细化Al-Ni合金的晶粒,使合金的Al3Ni相由常规凝固方式下的粗大板条状转变成细小均匀的树枝晶状;

    Microstructure observation found that the solidification structure of Al-Ni alloy is refined and the shape of Al_3Ni phase is transformed from bulky lath-shape in conventional solidification into fine fir-tree crystal during sub-rapid solidification atomization processing ;

  14. 引桥上部采用跨度为27m的预应力混凝土空心大板结构,提高了施工速度。

    For upper part of the approach trestle , prestressed concrete hollow slabs with span of 27m are adopted , which speeds up the construction .

  15. 采用DPIV技术(粒子图像测速技术)对大板坯连铸结晶器内熔体的流动进行了物理模拟。

    Physical simulation of melt flow in a mould in continuous casting steel slab was conducted by the digital particle image velocimetry ( DPIV ) system .

  16. 通过对GBF大板结构与传统大板结构的比较,对GBF大板结构的可行性、适用性和经济性进行了分析和探讨。

    Through the comparison of GBF large panel structure and traditional large panel structure , feasibility , applicability and economical efficiency of G BF large panel structure are analyzed and discussed .

  17. 本文指出当r≤0.08a时,线弹性无限大板I型裂纹尖端应力场的近似解,与解析解的误差不超过5.57%。

    This article points out that when r ≤ 0.08a , the error between the approximate and analytical solutions of the stresses near a crack of mode ⅰ in an infinite plate is in the range of 5.57 per cent .

  18. 就G2p≥4kD的情况给出了双参数地基上无限大板受集中力作用的两个新解。

    Two new solutions to an infinite plate on two parameter foundation under a concentrated force are given for G 2 p ≥ 4kD respectively .

  19. AX-100L大板定厚机采用龙门式连体结构,台车丝杆驱动自动走刀,并采用美国爱默生变频器可进行无极高速。

    AX-100L Slab Thickness Machine is adopted gantry linkage structure , autofeed driven by trolly screw mandrel and America EMERSON transducer to adjust the speed steplessly .

  20. 装配式大板结构竖缝抗震性能研究

    Study on seismic behavior of vertical connection in prefabricated panel structures

  21. 砂锯是花岗石大板最主要的加工设备。

    Gangsaw is the main equipment for manufacturing big granite plates .

  22. 装配式大板居住建筑结构设计与施工规程

    Specification for design and construction of fabricated board civil building structures

  23. 装配式大板建筑横墙不对正贯通问题探讨

    Discussion on Noncentral-Lined Transverse Walls in Assembled Large - Panel Building

  24. 济钢大板坯连铸机粘结漏钢原因分析

    Reason Analysis of Breakout by Sticking for Slab CCM in Jigang

  25. 好了,哈波丝警官,让我们看看那些大板牙!

    Okay , Officer Hopps . Let 's see those teeth !

  26. 大板建筑接缝修缮技术的研究

    Study on technique of repairing the connecting stitch of large panel

  27. 济钢第三炼钢厂大板坯连铸机新技术的应用

    Application of New Technology on Slab Continuous Casting Machine of Jigang

  28. 斜载荷作用下带直裂纹无限大板问题

    Problem of Straight Crack in an Infinite Plane with Skew Loading

  29. 装配式大板房屋模型在水平荷载作用下的试验研究

    The Model Test of Large Panel Multistory Building under Horizontal Load

  30. 关于《装配式大板居住建筑设计施工规程》中若干问题的说明

    Essentials on Design and Construction Specifications for Prefabricated Large Panel Residential Buildings