润湿

rùn shī
  • wetting;moist;madefaction
润湿润湿
润湿 [rùn shī]
  • (1) [moist]

  • (2) [土壤、空气等] 潮湿而润泽的;湿润

  • 清晨,一切都沉浸在润湿的雾气里

  • (3) 沾湿;浸湿

  • 小雨润湿了她的长发

润湿[rùn shī]
  1. 含Al2O3活性钎料与Al2O395陶瓷的润湿研究

    Wetting Research between Al_2O_395 Ceramic and Active Brazing Alloy Containing Al_2O_3

  2. Fe(78)B(13)Si9熔体与铁的润湿行为

    Wetting behavior of Fe_ ( 78 ) B_ ( 13 ) Si_9 melt on iron

  3. 露水润湿了他的衣服。

    His clothes were soaked with dew .

  4. 不使尘土飞扬的最好方法就是把地板润湿一下,随后用布擦一遍。

    The best way to lay the dust is to damp the floor down , and then rub it all over with a piece of cloth .

  5. 用自制的钠—萘处理液,改性聚四氟乙烯(PTFE)微孔膜,改善薄膜表面的润湿性和粘合性。

    Using self-prepared sodium naphthaline solution , PTFE micropore membrane was modified to improve its wetness and adhesiveness .

  6. 枝头上的露珠润湿了我们的头发和双肩。

    The dew on the branches drizzled our hair and shoulders .

  7. ~(60)Co辐照对聚四氟乙烯表面润湿性的影响

    The effect of  ̄ ( 60 ) Co irradiation on the wettability of polytetrafluoroethylene

  8. 电流密度和润湿剂对Ni镀层组织与形貌的影响

    Effects of Current Density and Wetting Agent on the Nickel Coating by Electroplating

  9. SiCP/Al复合材料中SiCP与铝基体的润湿性研究

    The Study on the Wettability of SiC_p and Aluminium Matrix in Composite Material SiC_p / Al

  10. 低温等离子体处理聚酯(PET)表面润湿性与表面结构的研究

    Studies on the Surface Wettability and Surface Structure of Polyester Treated with Low Temperature Plasma

  11. Ce及Mg对SiCp/Al复合材料界面润湿性的影响

    Study on the Influence of Ce and Mg on the Interface Behavior of SiC_p / Al Composites

  12. 合金元素对TiC与钢润湿性的影响

    Effect of Alloying Elements on Wettability between steel and TiC

  13. 金属间化合物FeAl与α-Al2O3的界面润湿行为及合金元素Y和Nb的作用

    Wettability of Intermetallic Fe-40al / α - Al2O3 System and the Effect of Microalloys Y and Nb

  14. 通过润湿性、亲油化度、沉降速度、SEM等测试对无机抗菌剂的改性效果进行了比较和表征。

    The modification effects were compared and characterized by lubricity , lipophilic degree and sedimentation rate tests and SEM .

  15. 结果表明,LSPO结构的衍生物有较好的润湿性;

    The results suggest that the derivative with LS PO structure has better wettability .

  16. 分析表明:稀土元素La的加入可减少金属胎体中的孔洞等缺陷,改善金属胎体对金刚石的润湿性,从而可以提高复合材料的强度和粘结性能。

    Analysis showed that La can reduce void in metal matrix and increase wettability of metal matrix to diamond .

  17. 合金元素Cr,Al对Sn-Ag-Cu基无铅钎料高温抗氧化和润湿性的影响

    Effect of Alloying Elements Cr , Al on High-Temperature Oxidation Resistance and Wettability of Sn-Ag-Cu Based Lead-Free Solder

  18. Pd-Ni基高温钎料对Si3N4陶瓷的润湿与界面连接

    Wettability of Pd-Ni Based Brazing Fillers on Si_3N_4 Ceramic and Interfacial Bonding

  19. 本文通过座滴法测定了真空条件下的几种铝合金与SiC的润湿角。

    In this paper , the contact angles of molten Al alloys with SiC are measured by the sessile drop method in vacuum .

  20. CuO添加剂对Ag/SnO2润湿性与界面特性的影响

    Effect of CuO Additive on the Wettability and Interface Behavior of Silver / Tin Oxide

  21. 通过引入相对润湿指数,发现阿尔奇饱和度指数n的对数与相对润湿指数之间存在很好的线性关系,为利用饱和度指数预测储层的润湿性提供了依据。

    A linear relationship exists between the logarithm of saturation exponent n and relative wettability index , which provides the basis for forecasting the wettability of reservoirs using saturation exponent .

  22. 稀土与Mg、Zn、Cu等合金元素适当组合改善润湿性的效果比单一稀土明显。

    The suitable combination of rare earths and alloying elements ( Mg , Zn , Cu ) improves wettability muchmore remarkably than a single rare earth element .

  23. Fe-Cr合金在TiO陶瓷上的润湿及其机理

    Wettability and mechanism of liquid Fe-Cr on TiO

  24. 混炼时加入硬脂酸(SA)作为表面活性剂以改善粘结剂对粉末的润湿性。

    When mixing , stearic acid ( SA ) was added as a surfactant to improve the wettability of the powder binder .

  25. 因此,本文就纸张和润湿液的pH值对印刷质量的影响,和印刷中所需的最佳pH值,以及纸张pH值和润湿液pH值之间的相互关系加以探讨。

    The influence of pH of paper and dampening liquid on the printing quality , the optimum pH , and the relation between the pH of paper and dampening liquid were discussed .

  26. 预处理SiC颗粒在ZA-27合金中的分散润湿过程和界面反应模型

    Dispersion and Wettability Process of Pretreated SiC Particles in ZA-27 Alloy and Model for Interface Reaction Wettability

  27. In-Sn合金熔体在非晶和晶态Cu(46)Zr(45)Al7Gd2合金上的润湿性及界面特性

    Wetting behavior and interfacial characteristics of In-Sn alloy on amorphous and crystalline cu_ ( 46 ) zr_ ( 45 ) al_7gd_2 substrates

  28. 当添加Cu含量为4%,稀土含量为0.05%时,合金的润湿角最小为49°;

    When adding content of Cu is 4 % and content of rare earth Ce is 0.05 % , contact angle of alloy is 49 °, which is the most small .

  29. 尽管已有研究显示加入In、Bi、Al等能提高Sn-Zn钎料这种润湿性和抗氧化性,但这种提高非常有限。

    Many elements such as In 、 Bi 、 Al are added to Sn-Zn alloy , but the improvement of wetting is still limited .

  30. 结果表明,PAES是一种润湿渗透性能优异的表面活性剂新品种。

    The results showed that PAES was an excellent fabric wetting agent with respectable permeability .