鼓风机

gǔ fēng jī
  • blowing machine;bellows;air-blast gin;air-blower;blast an blowing engine
鼓风机鼓风机
鼓风机 [gǔ fēng jī]
  • [blowing machine;air blower;blast an blowing engine] 产生空气流或气体流(如用以增加炉内气流、使房屋或矿井通风、冷却电子设备或由空气移动或扬起干草、青贮饲料、谷物或锯屑)的装置

鼓风机[gǔ fēng jī]
  1. 变频调速控制曝气池鼓风机

    Inverter Controlled Blowing Machine for Aeration Tank

  2. 手摇鼓风机输入参数的实验研究

    Experimental test of input parameters of a hand-driven air-blower

  3. Air(初三适用)用鼓风机向水中增氧;

    To increase oxygen in water by air - blower ;

  4. 基于3D的鼓风机参数化设计及其虚拟装配设计

    Fan parametric design and virtual assembling based on 3D

  5. PLC在高炉汽动式鼓风机监控系统的应用

    Application of PLC in Monitoring System of Turbo - blower in BF

  6. 基于PID控制的煤气鼓风机变频调速系统

    Coal Gas Blower Variable Frequency Speed Regulation System Based on PID Control

  7. 变频及PID控制技术在煤气鼓风机系统中的应用

    Application of Frequency-convert and PID Technique in Gas Fan

  8. PID控制在煤气鼓风机变频调速系统中的应用

    The Application of PID Control in Variable Frequency Adjustable Speed System of Coal Gas Blower

  9. GM型鼓风机在冰铜吹炼流程中的应用及对策

    Application and Measure of GM Type Blower on Air Blowing and Smelting of Mitte

  10. 介绍了GM系列鼓风机的结构特点。

    Structure feather of GM blower is introduced .

  11. 进口RAS罗茨鼓风机的修复技术和技术改造

    Restoration technique and technical modification of imported RAS Roots blower

  12. 罗茨鼓风机叶轮AutoCAD向Pro/E图形的模型转换及其族表建立

    Model Transmission of Roots Blower Impeller AutoCAD to Pro / E Figure and Build-up of Their Family Table

  13. 基于Solidworks技术的鼓风机叶轮设计的研究

    Study of Fan Impeller Design Based on Solidworks

  14. 基于PLC的高炉鼓风机控制系统的设计与实现国产TRT发电机组在马钢高炉上的应用

    A control system for blower designed & achieved on PLC Application of Chinese-Built TRT Unit in Blast-Furnaces

  15. 一经改进,新的以太网供电设备是一个全功能的IP通信枢纽和网络交换机,可通过以太网为高速球型摄像机,电暖炉,和鼓风机供电。

    One enhancement , the new Commander PoE , is a full-featured IP communications hub and network switch that provides power over Ethernet to high-speed domes , heaters , and blowers .

  16. DEH纯电调技术在G6-3.4高炉汽轮鼓风机上的应用

    Application of DEH Electric Regulating Technology in G6 - 3.4 Blast of B. F. Turbine

  17. 本文介绍了捷克和斯洛伐克CKD公司的MARK工业控制计算机构成及其在高炉鼓风机控制系统中的应用,较详细地说明了高炉鼓风机的工艺控制思想。

    The application of MARK industrial control computer made by Co . of Czechoslovakia to blast furnace blower is introduced in the paper .

  18. L4型陶瓷专用罗茨鼓风机

    Model L4 Ceramic Roots Blower

  19. 因此本文对离心鼓风机模型进行全三维整机CFD计算,通过对风机内部流场的模拟来深入的分析不同叶片型线风机产生性能差异的机理。

    So full 3D-CFD calculation has been held on the centrifugal blower model , mechanism of performance difference among different blade profiles has been analyzed deeply by the simulation .

  20. 100t转炉一次烟气鼓风机在线监测及故障诊断

    On line monitoring and fault diagnosis on primary flue gas air blower of the 100t convert

  21. 介绍TGM系列曝气离心鼓风机的主要特点。

    The main characteristic of the type of GM aeration centrifugal blower is introduced .

  22. 运用三维CAD软件Solidworks绘制出罗茨鼓风机所有零部件的三维图,并利用其中的三维虚拟装配功能,装配出整台罗茨鼓风机,并进行装配干涉检查。

    With the help of 3D CAD software Solidworks , modeling each part of the Roots blower and using the virtual assembling function to assemble the whole Roots blower , conducting the check of interference that may happen in the design process .

  23. 介绍了高炉鼓风机的防喘振控制流程图,重点阐述了SLPC可编程调节器的工作原理及功能。

    Flow chart of anti_surge control for blast furnace blower is introduced , working principle and function of SLPC programmable governor is set forth .

  24. 具体工作如下:基于整车热负荷的理论计算,完成压缩机选型,改进和优化设计了车厢内温度场、冷凝器、后HVAC鼓风机和蒸发器。

    The works were carried out as following : Based on heat load calculation of whole vehicle , the compressor was determined , and the inside car temperature field , condenser , back HVAC blower and evaporator were optimized .

  25. 针对国内风机企业现状,介绍了利用已有的叶轮DWG文件,建立Pro/E罗茨鼓风机叶轮三维实体的过程;

    Aiming at the present of fan manufacturer in domestic , the process of Pro / E roots blower impeller 3D is built up using the old impeller DWG document .

  26. 18MW汽轮鼓风机组油系统故障分析及处理

    Failures Analysis of Oil System of 18 MW Turbine Blower Unit and Disposal Measures

  27. HY-106检测仪在煤气鼓风机上的应用

    Application of Detecting Instrument HY-106 to Gas Blower

  28. 针对PTA输送系统鼓风机原电气联锁控制回路存在的缺陷,设计并采用了第一故障鉴别器,有效地解决了故障及时准确定位的难题。

    To counter the shortcomings of the former electric interlock control circuit of PTA transfer blower system , the first trouble ( circuit open ) discriminator has been designed and applied . So that the trouble location become prompt and accurate .

  29. 文间以进口HH型罗茨鼓风机为例,详细介绍了其装配过程及注意事项、间隙问题及调整控制和整机吊装就位等技术要点;

    With the imported HH type roots blower as an example this article introduces its installation process points for attention , as well as technical points of interval confirmation , adjustment and control , and integral hoisting preparation , etc.

  30. 对好氧段实施精确曝气改造后降低了运行能耗,优化运行后鼓风机单耗降低0.0060kW·h/m3,鼓风机综合电耗降低10.18%,一年共节省电量260452.18kW·h。

    Aeration of the aerobic stage modified the implementation of accurate reduced energy consumption , optimal consumption decreased after running blowers 0.0060kW · h / m3 , fan integrated power consumption reduced 10.18 % , a year savings of electricity 260452.18kW · h.