对应角

实现四对对应角位移铰链四杆机构解析法设计

Study on Analy Design of Hinged Four Bar Mechanism to Realize Four Corresponding Angular Displacement

按两连架杆对应角位移设计四杆机构的又一解析法

An analytical method to design the four-bar linkage for specific corresponding angular displacement of input and output links

本文介绍的实现两连架杆对应角位移四杆机构的解析法设计，是根据等视角作图法原理建立起来的又一种解析方法。

In this paper , an analytical method to design the four-bar linkage for specfic corresponding angular displacement of input and output links is introduced .

看到一个角的两个面，算出第三个面的颜色，点击下面对应的角块。

How to PlayLook at the two corner stickers to identify the corner and then click on the corner in the exploded cube below .

并根据Z-缓冲算法原理给出了非设计接触模式的判断准则以及数学表达式。针对顶部圆弧对应圆心角较小的特点，采用两条线段来逼近顶部圆弧使后2类接触判断得到简化。

Then analytical solutions were established using Z-buffer algorithm , and then top arc was approached by two line segments to simplify the determination of the last 2 kinds of contact points .

利用检测的声时值对圆形钢管进行脱空定量研究，提出了通过计算缺陷处弦长所对应圆心角的大小来进行脱空的定量分析。

In this paper , circular steel pipe is done for the quantitative study by detecting the sonic time and we do a quantitative calculation made by calculating the chord length defects of the central angle .

用退偏实验得到的数据表明p波的退偏极小值点对应的入射角就是该材料的布儒斯特角。

With the data of the depolarization experiment we find that the depolarization weak extremum of p-wave is at the Brewster angle of its material .

以前人的试验结果为依据，应用广义塑性力学原理对应力洛德角方向上的剪切屈服面γpθ进行了初步研究，首次提出了它的数学表达式。

In this paper , the shear yield surface in the θ σ direction is studied preliminarily according to the principle of generalized plastic mechanics , and the mathematical expression of γ p θ is presented initially based on the experiments of other people .

文章在总结国内外SRC柱试验研究资料的基础上，得出SRC柱四个性能水平极限状态对应的位移角限值的分布范围。

Based on the experiments and results of SRC columns at home and abroad , the range of deformation limits of SRC columns are developed for four different seismic performance levels .

所选用的CCD芯片像元尺寸为23μm×23μm，像元数384×288，全视场内混色光点列图能量重心偏最大值1.6μm，对应于4.39角秒。

Total number of elements of selected CCD is 384 × 288 , pixel size 23 μ m × 23 μ m. Maximum energy centre deviation in FOV for polychrome spot diagram is 1.6 μ m , corresponding to 4 . 39 ″ .

结论肺内、C7-T5脊神经节及对应脊髓后角神经元的SH2-Bβ可能参与NGF介导的哮喘的发病过程。

Conclusion The present results indicate that SH2-B β in the lungs , primary afferent neurons ( C_ ( 7 ) - T_ ( 5 ) spinal ganglia and the corresponding posterior horn of the spinalcord ) might be involved in the pathogenesis of NGF mediated asthma .

绕任意轴μ旋转φ对应的欧拉角的新求解公式

New formulae of Euler angle related to rotating φ around arbitrary axis μ

设计工况下，最高效率所对应的冲角并非为零。

The incidence corresponding to the highest efficiency is not zero at the design condition .

在带宽最大值对应的入射角基础上，减小入射角时，分光光谱带宽向长波段漂移并且出现凹陷；

In bandwidth maximum value correspondence incidence angle foundation , when reducing incident angle , the transmittance spectrum move to long-wave band and appear hollow aperture .

在球头铣刀几何建模中，考虑铣刀残余高度的影响，推导了不同轴向切深时对应的切入角与切出角范围。

In the geometry modeling of ball end mill cutter , consideration of cusp effect of ball milling , accurate cutting angle range corresponding to different axial cutting depth are deduced .

研究圆柱根圆等截面圆柱榨螺体积的计算，将螺纹对应的圆心角M等分，得到M个计算单元。

The volume of cylinder-shaped worm section with equal area has been studied and computed . The center angle corresponding with the screw thread was divided into M equal segments that would be computed as calculation elements .

提出确定异型钢丝形状和尺寸的方法：（1）计算异型钢丝在法面内的曲率半径；（2）计算异型钢丝大面所对应的圆心角。

To put forward the methods of determining the shape and size of shaped steel wire such as how to calculate the curvature radius in normal plane and the central angle corresponding to large section , then the pass can be designed by computer .

文章结果表明，对于大鼠无载荷状态气管环，软骨剪开与肌肉剪开所展成的张开角是不同的，软骨剪开对应的张开角明显大于肌肉剪开的张开角。

Results in this paper show that for the no-load ring of rat trachea , the opening angle obtained for cartilaginous cut differs from that for muscular cut , i.e. the opening angle . for cartilaginous cut is significantly larger than that for muscular cut .

方法：利用免疫组织化学和Western印迹方法，观察生理盐水组、单纯致敏组、哮喘组和地塞米松组豚鼠肺及内脏感觉传入系统（C7T5脊神经节及对应的脊髓后角）NGF表达的变化。

Methods : The alterations of NGF expression were observed by means of immunohistochemistry and Western blot in the lung , C_ 7-T_ 5 spinal ganglia and the corresponding dorsal horn of the spinal cord of all guinea pigs .

结论结果提示，SH2-Bβ在哮喘小鼠肺、C7~T5节段脊神经节及对应的脊髓后角过表达，可能是NGF参与哮喘发病的重要信号分子。

Conclusion The overexpression of SH2-B β indicated that SH2-B β might be an important signal molecule in the pathogenesis of asthma mediated by NGF .

目的：探讨地塞米松对哮喘豚鼠肺及内脏感觉传入系统（C7T5脊神经节及对应的脊髓后角）神经生长因子（NGF）表达的影响。

Objective : To explore the effect of dexamethasone on the expression of NGF in the lung and the visceral sensory afferent system ( C_ 7-T_ 5 spinal ganglia and the corresponding dorsal horn of the spinal cord ) of asthmatic guinea pigs .

C组豚鼠C7～T5脊神经节和对应的脊髓后角PKC的A值分别为0.215±0.014、0.176±0.010，C组与A组比较差异有统计学意义（P<0.01）。

The A values of PKC were 0.215 ± 0.014 and 0.176 ± 0.010 respectively in the C_7-T_5 spinal ganglia and the corresponding posterior horn of the spinal cord of group C , which were significantly different compared with group A ( P < 0.01 ) .

但当液滴半径大于1微米后，对应的适宜接触角开始随液滴半径的增加而明显降低。

When the droplet radius is larger than 1 micron however , the optimum contact angle decreases with the increase of droplet radius obviously .

本文给出了对船型剖面按弧长等分求对应点的保角变换法，并应用于船舶的运动计算中。

Conformal transformation of body-plan sections by considering equal arc segments to obtain corresponding points and its application to the calculation of ship motions are presented .

运用力学和运动学方法推导得到了余留支撑体所对应的最小保留角和爆破切口高度计算公式。

The calculating formulae of minimum angle corresponding to the remained wall and blasting cutting height are deduced on the basis of principle of mechanics and dynamics .

对于不同波长的入射线偏振光，存在一个最佳的入射角，等于其各自对应的有效布鲁斯特角。

In addition , there is an optimal incident angle for depolarization of linearly polarized light with different wavelengths , which is equal to their effective Brewster angles , respectively .

根据得到的土拱形状，分别计算对应不同内摩擦角和墙土摩擦角时的侧土压力系数；

According to the shapes of minor principal stress arch , the coefficients of earth pressure corresponding to different angle of internal friction and that of wall friction are gained .

马氏体相变是无扩散的位移型相变，对于一个给定的材料，由切变产生的表面浮突是马氏体相变的主要特征之一，它对应唯一的切变角。

The martensitic transformation is a diffusionless and displacive transformation , and the surface relief caused by shear , as one of major features of martensitic transformation , corresponds to unique shear angle for a given material .

根据土拱形状的理论分析计算平均竖向应力，由此得到了对应不同内摩擦角和墙土摩擦角的侧土压力系数，以及筒仓侧土压力的理论公式。

Average vertical earth pressures are obtained according to the shape of minor principal stress arch , and consequently the coefficient of earth pressures versus the angle of inter - nal friction and the angle of wall friction and the formula of earth pressures on silos are obtained .