空气压缩机

无基础V型空气压缩机减振系统设计

Design of Vibration Damping System for V-type Air Compressor of Non-foundation

变速积分PID算法在空气压缩机压力控制系统中的应用

PID With Variable Integral Action and Its Application to Air Compressor Pressure Control

往复式高压氧压机倒车操作法的优化PET瓶生产用空气压缩机

Optimization of the switching method of reciprocating high pressure oxygen compressors pet compressors

螺杆式空气压缩机数字蝶阀的PLC直接控制

The PLC Control of the Numeral Reed Valve in the Spiral Long Rod Air Compressor

复合轮齿空气压缩机CAD

Compound Gear Air Compressor CAD

本文应用Fluent软件对喷油螺杆式空气压缩机第一级油气分离器内的气液两相流流场进行了数值模拟。

The flow field inside an oil-gas separator are simulated with software Fluent .

基于PIC单片机的螺杆式空气压缩机小型控制器

Small Controller of Screw Air Compressor Based on PIC Microcontroller

基于PIC单片机的小型空气压缩机控制装置

A PIC microprocessor-based control device for a miniature air compressor

复合轮齿空气压缩机CAD／CAM系统由三大模块构成：复合轮齿机构参数化设计模块、压缩机典型零件CAD模块、压缩机典型零件CAM模块。

This system is made up of three parts : compound gear air compressor parameters design module , typical compressor-part CAD module and typical compressor-part CAM module .

膨胀机TB-201是精对苯二甲酸（PTA）生产装置中大型空气压缩机的一部分。

TB - 201 expander is a part of the large - sized air compressor in PTA production plant .

介绍了空气压缩机PLC控制系统组成、保护功能、控制原理、系统通信、系统信号的采集，以及控制系统软件设计思想。

The paper describes the composition , protection function , control principle , system communication , collection of system signals and design idea of the PLC system of air compressors .

本文导出了无基础V型活塞式空气压缩机振动的力学模型，阐述了减振系统设计计算的基本问题。

In this paper , the vibration mechanic at model for a no-base , V-type positon air compressor is deduced , some elementary problems of design and calculation of damping system are expounded .

介绍一个由STD微机组成的空气压缩机站得机监控系统的功能及其构成、系统软件编制、抗干扰措施等。

This paper describes an STD microcomputer-based monitoring system for air compressor station including its system functions , constitution , system software structure and anti-interference measures .

4L空气压缩机无油润滑关键部件改造设计

Improvement of Key Parts of 4L Air Compressor Without Oil Lubrication

新5L型空气压缩机事故原因分析

Analysis on reasons of air compressor accidents

不同组转子组合在DEMAG空气压缩机上的应用

Application of different group of roters combination to Demag air compressor

介绍了5L-40/8型空气压缩机在转速不变的情况下，将原二级压缩流程改为双一级CO2压缩流程，并叙述了改造方案、依据及改造后的实际效果。

Plan and innovation basis for 5L 40 / 8 air compressor two stage compressor route being innovated into double one stage CO2 compression route , and the results after the innovation are introduced .

根据燃料电池用空压机的特点，设计和实现了基于PLC的空气压缩机的性能测试系统，并对单螺杆喷水压缩机进行具体试验分析，为进一步优化空压机结构及理论验证提供试验依据。

According to the characteristics of air compressors for fuel cell system , the paper implements an air compressor performance testing system based on PLC . And experiments and analysis was done on a single screw air compressor with water lubricated .

无端隙活塞环在NPT-5型空气压缩机中的应用

Application of piston ring without end gap to NPT-5 air compressor

充分利用PLC和工控机各自的优点，对3台仪表空气压缩机采用PLC分散就地控制和工控机集中远方控制相结合的控制方案。

For three air compressors , a control scheme that combines the distributed control on the spot and the remote central control is adopted . The distributed control is completed by PLC and the remote central control is completed by industrial control computer .

激光专用冷水机，550W排烟机，微型空气压缩机。

Water cooling system , 550W exhaust , micro-air compressor .

NPT-5型空气压缩机机油乳化的原因分析及改进方案

Reason analysis and improvement design for oil emulsification of NPT-5 air compressor

并利用该模型比较了不同的C3I系统的作战效能，对结果进行了简要分析，证明了SEA方法模型对舰载防空C3I系统进行效能评估的可行性。空气压缩机的防爆Air（初三适用）

The paper also applies the model in comparing effectiveness of different C3I systems , and then analyzes the result briefly to prove the probability of applying SEA model in effectiveness analysis of anti-air operation of shipboard C3I system .

对W-1.8/10型空气压缩机进行了技术改造。

The technology improvement is made for model W-1.8/10 air compressor .

贵冶TA-38无油离心式空气压缩机精密点检措施

Precise inspection measures on ta-38 oil-free centrifugal air compressor

水电的潜力已接近用便携式潜水空气压缩机倒置式潜油电泵机组井下增压注水技术在B15井的应用

Underground pressure boosting and water injection techniques using inversion type submersible electric pump and Its application in B15 Well

采用三次谐波励磁的同步发电机，通过AVR电路产生稳定的380V三相交流电，可以带动打磨机、空气压缩机等功率较大的电动工具；

It can generate a steady 380 V three phase alternating current through an AVR circuit , and can drive heavy electric tools such as polisher , air compressor and so on .

IngersollRand空气压缩机作为气源站，广泛地应用于矿山开发、工程建设和地震勘探等领域。

As a air - source station , the Ingersoll - Rand 12 / 56 air compressor is widely used for mine exploration , engineering construction and seismic exploration etc.

此外，发电机提供的380V三相交流电，作为辅助电源可带动打磨机、空气压缩机等电动工具。

In addition , the generator can provide a steady 380V three-phase alternating-current , which can drive heavy load tools such as a polishes an air-compressor and so on .

当踩下制动踏板后，从空气压缩机l来的高压气体推动气液总泵4的气活塞，气活塞再推动油活塞。

When the pressure to the brakes , the air compressor from lto promote the gas-liquid high-pressure gas4 gas piston master cylinder , gas piston and then push the oil piston .